Station d'accueil HDD tout-en-un

Question

Hello,

I installed this docking station, All In 1 HDD Docking, and no matter how I connect and reconnect it, it won't display anything for me.
It is not even recognized in device manager in Windows 7 32-bit.
In short, if someone could help me, thank you.

fredgi

Configuration: Windows 7 / Firefox 16.0

Micka_108 · Accepted Answer

Gently, don't talk about off-topic things First, try to install the Dock driver: http://www.onsite-computers.co.uk/all-in-1-docking-station-drivers.html

serialkiller42 · Answer

Hi fredgi,

A hard drive docking station will not be recognized if you don't have a hard drive plugged into it.
If you don’t have any hard drives connected to your dock, it’s normal that your PC doesn’t detect anything.

--
“Between the bit, a unit of computing measurement, and the queuing theory, the printed circuit board is a bit sexist.”

fredgi · Answer

Hi serialkiller42

I have my hard drive connected to my dock (IDE) and it doesn't show up on my computer (desktop), no options to open it or copy folders onto it.
I find it strange, I will check with a SATA hard drive to see if it does the same thing.

Thanks

serialkiller42 · Answer

Try with another hard drive.

If it works, your IDE drive is dead; otherwise, your station is dead.

"Between the bit, a unit of computer measurement, and the queues of polling, the printed circuit is a bit sexist."

fredgi · Answer

Actually, I just saw that I'm missing Cypress AT2LP RC42 and I don't know how to install it? I tried in Device Manager and updated, right-clicking on this device but nothing happens. If you have any solutions, thank you.

miles_mayhem · Answer

I bought this dock and after testing 5 different drives, and after doing some research online, I can tell you with certainty that Western Digital drives do not work (at least my 4 drives).
No WD drive is recognized under Windows 7 with this dock, whereas they are all recognized when connected via a standard IDE cable to the case. Some power on and spin but are not recognized, some don’t even start.
Out of the 5 I tested, only one drive works perfectly with the dock and it’s a Maxtor :(
It's frustrating! I'm hesitating to take it back.

simipi · Answer

Hello.
Under Windows 7, the SATA drives are recognized properly. However, I can't get the IDE drives to work.
I also haven't figured out if the dock is USB 3 compatible because there appear to be several models. (purchased on Amazon). I have model 875.

Bidibidi · Answer

I confirm that Western Digital hard drives do not work with the dock.

Omnibook · Answer

I have the same problem with a 500 GB WD Caviar Blue IDE hard drive under XP SP3! Is there a solution somewhere on the Net? Please help me out of my despair! Dneis

Station d'accueil HDD tout-en-un

9 réponses

Texture issues in enshrouded

Announcement: online source code archive

Pc that doesn't run normally

Keyboard issue with the "alt gr" key

End of the movie room 1408

Pc startup black screen white dash blinking

Edit mp3 file properties

Freebox telephony no dial tone

Pc won't start - pxe issue (e61 and m0f)

I would like to change the date on my digitec watch.