TLC 3 Remote Control Notice
aba94
-
the rock -
the rock -
To search for the code for your TV on TLC 3, point your TLC 3 at the turned-on television. 1 Press TV. 2 Press the setup button until the TLC 3 indicator light blinks twice. Press 991. The light will blink twice. 3 Now alternately press TV and power until the television turns off. Repeat the operation (TV + Power) several times if needed. Once the television is turned off, press setup. It's done.
Configuration: Windows XP Internet Explorer 6.0
8 réponses
Hello, I have the TLC 4s Firstine remote control and I no longer have the manual (code)
thank you in advance
thank you in advance
The procedure described above works for the Firstline TLC 4S remote control. I just adjusted it. Thank you.
Good evening, after retrieving the remote control code (updating the remote control as described in the first post, then functional buttons again), I wanted to adjust my channels but encountered a problem:
- The actions I can perform on my Firstline TV are identifiable by colors on the original remote control. However, the one I have, the BlueSky universal remote, does not reproduce this color code. While trying to find the right buttons, I managed to delete all the channels, and eventually turned off the TV and changed the remote control code...
As a result, I can no longer turn on my TV, the remote control is on but no button is accepted by the TV in standby mode.
Is there a way to reset a BlueSky remote control that does not have a reset button?
Thank you
- The actions I can perform on my Firstline TV are identifiable by colors on the original remote control. However, the one I have, the BlueSky universal remote, does not reproduce this color code. While trying to find the right buttons, I managed to delete all the channels, and eventually turned off the TV and changed the remote control code...
As a result, I can no longer turn on my TV, the remote control is on but no button is accepted by the TV in standby mode.
Is there a way to reset a BlueSky remote control that does not have a reset button?
Thank you
I have a "home cinema firstline" and the remote control is not working anymore, its serial number is: fl100
Thank you for your help.
Thank you for your help.
Hello, I hope you are still with us and thank you for the notice regarding this TLC3.
We kindly ask you to provide us with the source of this notice or a copy, or to use this remote control even with other devices, such as a digital receiver or a VCR or a DVD, etc.
Thank you.
We kindly ask you to provide us with the source of this notice or a copy, or to use this remote control even with other devices, such as a digital receiver or a VCR or a DVD, etc.
Thank you.
http://www.commentcamarche.net/forum/affich 6691749 remote control firsline tlc 3
--
To err is human, to persist is diabolical.
--
To err is human, to persist is diabolical.