Flashing power button on Lexmark
lesmaws
Posted messages
1
Registration date
Status
Member
-
lolo29 -
lolo29 -
Hello,
I've had a Lexmark X1190 printer for 2 months, and so far everything was working well, but now the power button keeps flashing constantly when I turn it on, and obviously I can't print, scan, etc. ... I checked for paper jams, I installed 2 new cartridges, I uninstalled/reinstalled it twice ... nothing works.
Does anyone have a possible solution as I haven't found anything in the previous posts, thank you!
I've had a Lexmark X1190 printer for 2 months, and so far everything was working well, but now the power button keeps flashing constantly when I turn it on, and obviously I can't print, scan, etc. ... I checked for paper jams, I installed 2 new cartridges, I uninstalled/reinstalled it twice ... nothing works.
Does anyone have a possible solution as I haven't found anything in the previous posts, thank you!
2 answers
Remove and reconnect by unplugging the USB cable from both ends and the wall outlet. Wait 5 minutes and it should work.
Hello,
what's great about this kind of printer is that normally you can do everything from it without your computer interfering with your actions.
So to start:
try to do everything via your printer without going through your computer. This way you can address the problem more quickly. I even recommend unplugging the printer from the PC.
1- What does the LED correspond to? Generally, it provides some indication.
2- Unplug your printer from the power and PC (and phone line if fax). Then plug your printer back in. After it warms up, is the LED still on?
3- Test printing via the printer menus. If you have a small display screen to navigate the menus, it should show you an error message; please report that to me. (thank you)
what's great about this kind of printer is that normally you can do everything from it without your computer interfering with your actions.
So to start:
try to do everything via your printer without going through your computer. This way you can address the problem more quickly. I even recommend unplugging the printer from the PC.
1- What does the LED correspond to? Generally, it provides some indication.
2- Unplug your printer from the power and PC (and phone line if fax). Then plug your printer back in. After it warms up, is the LED still on?
3- Test printing via the printer menus. If you have a small display screen to navigate the menus, it should show you an error message; please report that to me. (thank you)