Cloture de gravure impossible avec Nero 7

Bonjour à tous,

Voila plusieurs fois que j'essaie de graver un DVD de données avec Nero et à chaque fois, à la fin, il me met que la gravure a échoué.

Je crois que c'est un problème avec la fonction "disc-at-once" mais je ne sais pas quoi faire.

Après qques recherches, je suis passé de la versions 6 de néro à la version 7, mais ça n'a rien donné.

J'ai aussi mis à jour le firmware de mon graveur, idem.

J'ai essayé toutes les vitesses de gravure, idem.

J'ai changé de marque de dvd, idem.

Si quelqu'un a une autre idée, je suis preneur.


Je vous joins un log de Nero après un échec.

Merci de votre aide et merci pour le temps que vous consacrez à aider les autres.



5C80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US07 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <VOBID InstantDrive CD >Version: 14 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1

Scsi-Device-Map

CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U nvatabus Port 0 ID 2 DMA: Off
DiskPeripheral : Maxtor 6L200M0 nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L200M0 nvatabus Port 2 ID 2 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 3 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off

CDRom-Device-Map

TSSTcorp CD/DVDW TS-H552U E: CDRom0
VOBID InstantDrive CD F: CDRom2
AXV CD/DVD-ROM K: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 210MB (215712kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.11.2006
Compilation ISO
11:55:08 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:55:08 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

11:55:08 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:55:08 #4 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW TS-H552U running

11:55:08 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

11:55:08 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

11:55:08 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2147567 (477:14.17, 4194MB)

11:55:08 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

11:55:08 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: INFODI - SC-R20
Disc Application Code: 64, Disc Physical Code: 193

11:55:08 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:55:08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2147568 (2147568) = #2147568/477:14.18
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2147568 blocks [E: TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------

11:55:08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4398219264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2147568 | lead-out | 1 | 0x41 | 0x00

11:55:09 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:55:09 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

11:55:09 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

11:55:09 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

11:55:09 #17 Phase 28 File dlgbrnst.cpp, Line 1724
Speed measurement started

11:55:09 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:56:35 #19 Text 0 File WriterStatus.cpp, Line 116
<E: TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 2147568 (20C4F0h), length 0 blocks

11:56:35 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:56:35 #21 Phase 29 File dlgbrnst.cpp, Line 1673
Speed measurement completed: 38,4x (52 994 Ko/s)

11:56:35 #22 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 8x (11 080 Ko/s)

11:56:35 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:56:35 #24 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession

11:56:35 #25 Text 0 File MMC.cpp, Line 21541
Set BUFE: Super Link -> ON

11:56:35 #26 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

11:56:35 #27 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:56:45 #28 Text 0 File Cdrdrv.cpp, Line 1195
11:56:45.283 - E: TSSTcorp CD/DVDW TS-H552U : Queue again later

12:03:58 #29 Text 0 File WriterStatus.cpp, Line 116
<E: TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 2147568 (20C4F0h), length 0 blocks

12:03:58 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:03:58 #31 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 2147567

12:04:04 #32 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out

12:04:32 #33 Phase 33 File dlgbrnst.cpp, Line 1724
Simulation completed successfully at 8x (11 080 Ko/s)

12:04:33 #34 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11 080 Ko/s)

12:04:33 #35 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:04:33 #36 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession

12:04:33 #37 Text 0 File MMC.cpp, Line 21541
Set BUFE: Super Link -> ON

12:04:33 #38 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 2194688
DVD high compatibility mode: Yes

12:04:33 #39 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 23C4EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 23C500 h
Start sector number of the next Border-In: 247CA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 23 C5 00 00 24 7C A0 - 00 00 00 00 00 00 00 00 .#Å..$|.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:04:33 #40 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 20 C4 F0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

12:04:33 #41 CDR -1066 File ThreadedTransferInterface.cpp, Line 1783
Invalid field in command
E: TSSTcorp CD/DVDW TS-H552U

12:04:33 #42 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once

12:04:33 #43 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 04:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)