Changer ma carte graphique
nicolebarjot
Messages postés
15
Statut
Membre
-
Utilisateur anonyme -
Utilisateur anonyme -
Bonjour.
Voila je voudrais changer ma carte graphique par une GeForce GTX 560 Ti (http://www.pc-look.com/boutik/product_info.php?products_id=56084&referer=pricerunner) et je voudrais savoir si elle serai compatible avec ma carte mere et mon processeur.
J'ai fait une analyse avec CPUz pour les caractéristiques de mon PC mais je comprends pas tres bien tout ce qui est écrit.
Merci d'avance pour vos réponses ^^
CPU-Z Readme file
------------------
Version 1.57
February 2011
Contact : cpuz@cpuid.com
Web page: https://www.cpuid.com/softwares/cpu-z.html
Validation page : https://valid.x86.fr/
Hall of Fame : https://valid.x86.fr/records.php
Forum : http://forum.canardpc.com/forumdisplay.php?f=74
CPUID SDK : http://www.cpuid-pro.com/devkits.php
Configuration file (cpuz.ini)
------------------------------
The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=1
MaxPCIBus=256
DMI=1
Sensor=1
SMBus=1
Display=1
ShowDutyCycles=0
UseDisplayAPI=1
- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable.
- PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable.
- SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable.
- Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable.
- ShowDutyCycles : Set to 1, switches the alternate clock computation method based on duty cycles. 0 to disable.
- UseDisplayAPI : Set to 1, uses the display driver to read the display adapters information.
Parameters
----------
-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.
-html=filename : Same as "-txt" except it generates the html report.
-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).
Keys
----
F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory
Cache Latency Tool
------------------
The cache latency tool can be downloaded at that address : http://www.cpuid.com/medias/files/softwares/misc/latency.zip
History
-------
--------------------------------------------------------------------------------------------------
1.57 - February 2011
- Intel Xeon "Westmere-EX" support.
- GPU frequency report on Intel Sandy Bridge processor.
- AMD Zacate/Ontario processors support.
- Report TDP on main page when available.
- Cores clocks on floating menu.
- P67/H67 stepping report.
--------------------------------------------------------------------------------------------------
1.56 - October 2010
- Intel Core i3/i5/i7 "2000" serie processors (Sandy Bridge) with new logos.
- Intel Core i7 970 "Gulftown".
- Intel P67 chipset.
- AMD Phenom II, Athlon II and Sempron II "Caspian" processors.
--------------------------------------------------------------------------------------------------
1.55 - July 2010
- VIA VX900/VX900M and VN1000/VN1000M chipsets.
- Intel Core i5-760, Core i7-875K and Core i5-655K processors.
- Intel Core i7-940XM, 840QM, 740QM mobile processors.
- Intel Core i5-450M, 540UM, 430UM, Core i3-370M mobile processors.
- Intel Pentium P6000 processor.
- New parameter in cpuz.ini : UseDisplayAPI
--------------------------------------------------------------------------------------------------
1.54 - March 2010
- Intel Core i7-880, Core i5-680, Core i3-550 processors.
- Intel Xeon 5600 line (32nm) processors.
- AMD Phenom II X6, Sempron II, Turion II, Turion II Ultra and Athlon II Mobile "Caspian" processors.
- NVIDIA GeForce 320M chipset.
- AMD 870/880G/890GX + SB800/SB850 chipset.
- Introduction of validation rooms.
--------------------------------------------------------------------------------------------------
1.53 - December 2009
- Fix validation issue with AMD Phenom processors (1.53.1).
- Preliminary support for Intel Pinetrail platform (1.53.1).
- Intel Core i7 930 & 950, Core i7 980X "Gulftown", Xeon W3565.
- Intel Mobile Core i7/i5/i3 "Arrendale" (LV and ULV).
- Intel "Clarkdale" platform improved support.
- AMD Phenom FX-5000, Athlon II X2/X3/X4, Athlon L110.
- AMD AM3 socket detection improved.
- VIA VX800 and VX855 chipsets support.
- ATI Radeon 2100 and Radeon X1250 support.
- DirectX 11 detection fix.
- Hardware virtualization support now reported as instructions set.
- New HTML report with less information.
--------------------------------------------------------------------------------------------------
1.52 - July 2009
- Fix Core i7 clock bug (1.52.2)
- New design with "Graphics" tab.
- NVIDIA nForce 980a chipset support.
- Intel Core i5 and Core i3 processors.
- Intel Atom Z530, Pentium DC E6300 (2.8GHz) and Core 2 Solo processors.
- Intel P55 and US15W chipsets preliminary support.
- AMD Phenom TWKR support.
- AMD Phenom X2 "Callisto" and Athlon X2 "Regor" processors.
- AMD Opteron 6-core "Istanbul" processor.
- Improved support for Windows 7.
- New Intel logos.
MD5 checksum : please refer to https://www.cpuid.com/softwares/cpu-z.html#history
--------------------------------------------------------------------------------------------------
1.51 - April 2009
- New version with installer.
- NVIDIA ION platform.
- Intel "Clarkdale" processor preliminary support.
MD5 checksum : please refer to https://www.cpuid.com/softwares/cpu-z.html#history
--------------------------------------------------------------------------------------------------
1.50 - February 2009
- Improved support for AMD Phenom II processor.
- Support for NVIDIA 740i chipset.
- Several bug fixes.
MD5 cpuz.exe (1.50) : E1C827C54F527404EDDA6D65DA0280D8
--------------------------------------------------------------------------------------------------
1.49 - December 2008
- AMD Phenom II processor.
- New Intel Core 2 models.
- Improved loading time.
- New online validation process.
MD5 cpuz.exe (1.49) : B836E86B40D7AFAF99D9C512E8CC9FEF
--------------------------------------------------------------------------------------------------
1.48 - October 2008
- Improved support for Intel Core i7 (Bloomfield & Gainestown).
- Intel Atom dual-core version support.
- AMD Athlon "Kuma" processor support.
- Alternate clock computation method based on "duty cycles" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini)
MD5 cpuz.exe (1.48) : DB78FBF1F99B7709240B495E59758CCE
--------------------------------------------------------------------------------------------------
1.47 - August 2008
- Intel Core i7 processor.
- Intel Core 2 Duo S Mobile processors.
- NVIDIA MCP79/7A chipset.
- AMD 790GX / SB750 chipset.
MD5 cpuz.exe (1.47) : A7484EFA3C32BC968C248CB1237FF493
--------------------------------------------------------------------------------------------------
1.46 - June 2008
- AMD Puma platform (Turion & Turion Ultra "Griffin");
- AMD Black Edition processors.
- Intel Xeon EX "Dunnington".
MD5 cpuz.exe (1.46) : C47432C41EC26156128F7B8E09E884CF
--------------------------------------------------------------------------------------------------
1.45 - May 2008
- Intel Atom Z500/Z510/Z520/Z530/Z540 processors.
- Intel Core 2 Duo E7x00 processor.
- AMD 45 nm Phenom (Dened & Shanghai) processors.
- Intel P45 chipset.
MD5 cpuz.exe (1.45) : DD4E540C04297CF93DC721166C13446E
--------------------------------------------------------------------------------------------------
1.44.2 - Mars 2008
- NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2)
- Intel G35 chipset (1.44.2)
- Updated support for VIA chipsets (1.44.2)
- Support for the new validator (1.44.1)
- Preliminary support for VIA Isaiah processor.
- Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden.
- Memory timings on Intel 5400A/B MCH (Skulltrail).
- Fix AMD Phenom detection issue on Windows Vista 64.
MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6
--------------------------------------------------------------------------------------------------
1.43 - January 2008
- Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH).
- Intel X48 chipset detection.
- AMD Athlon 64-LE 1600 and 1620 support.
- Fix detection issues on unlocked Phenom (ES/BE).
--------------------------------------------------------------------------------------------------
1.42 - November 2007
- Intel Wolfdale/Yorkfield/Penryn CPUs support.
- AMD Phenom and Opteron Barcelona support improved.
- Current core selection menu (right click on the CPU page).
- Loading progress.
--------------------------------------------------------------------------------------------------
1.41 - September 2007
- New CPU voltage monitoring.
- Intel Xeon Tigerton support.
- Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe).
- AMD K10 Phenom preliminary support.
- NVIDIA MCP73 support.
- Intel XMP profiles support.
- Memory modules nominal voltage.
--------------------------------------------------------------------------------------------------
1.40.5 - July 2007
- NVIDIA nForce 560 chipset support.
- Intel Dynamic FSB technology support.
- Athlon 64 X2 BE & Sempron LE (TDP 45W).
- SiS671/FX/DX/MX northbridge support.
- SiS968 southbridge support.
--------------------------------------------------------------------------------------------------
1.40 - May 2007
- VIA P4M800CE chipset support.
- Preliminary support for Intel Penryn CPUs family (45 nm).
- Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition.
- Intel P35, G33, G31, Q35, Q33, X38 chipsets support.
- Intel GL960/GM965/PM965 chipsets support.
- AMD Athlon 64 "Lima" processor support.
- AMD Geode LX processor support.
- NVIDIA nForce 520 chipset support.
- New parameter "-console" to generate output in a command prompt (Windows XP only).
- New icon.
--------------------------------------------------------------------------------------------------
1.39 - February 2007
- Windows Vista 64 support.
- VIA CX700/VX700 chipset.
- Added Merom XE (X7900/X7800)
- Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning.
- Added "-core" parameter to display the clock speed of the specified core.
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.38 - November 2006
- VIA P4M890 and P4M900 chipsets.
- NVIDIA 650i and 680i chipset.
- AMD Athlon 64 FX-7x processor.
- Core 2 Duo E6850, E6750, E6650 processors.
- socket 775 Xeon processor.
- New parameters "-txt" and "-html" (see above).
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.37 - October 2006
- Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support.
- Changed SSE4 to SSSE3 (Supplemental SSE3).
- Added VIA VT8237A southbridge.
- New HTML report.
- Several bug fixes.
--------------------------------------------------------------------------------------------------
1.36 - August 2006
- New processor information display.
- Intel 5000X/P/Z/V SPD support.
- Intel Pentium D 925 & 945.
--------------------------------------------------------------------------------------------------
1.35 - June 2006
- ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support.
- ATI SB600 southbridge support.
- Intel P965 chipset support.
- Engineering samples Core based CPUs report.
- Windows Vista product line report.
--------------------------------------------------------------------------------------------------
1.34.1 - May 2006
- AMD socket AM2/S1/F (rev F.) CPUs support.
- Enhanced Performance Profile (EPP) memory information report.
- Added Trc (bank cycle time) in DDR2 SPD report.
- Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets.
- FB-DIMM DDR2 SPD information report.
- Core 2 Duo names and logos added.
- Turion 64 X2 logo added.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.33.1 - April 2006
- Intel i965 chipset support added.
- Fix SPD detection problem on SiS 964/965/966 southbridges.
- ODC (Odd Divisor Correct) for Athlon64 rev E.
--------------------------------------------------------------------------------------------------
1.33 - April 2006
- Memory Command Rate timing added.
- Improved support for Intel Conroe/Merom CPUs.
- Celeron M 420/430 Yonah.
- Xeon Dual core Dempsey.
- VIA C7-M CPU detection added.
- VIA PT880, PT880 Pro, K8T900 chipsets support.
- nVidia nForce 550/560/570 (MCP55) chipset support.
- VIA VT8251 southbridge support.
- Fixed HyperTransport information misreports (in dump file).
- Added K6-2 and K6-III logos.
--------------------------------------------------------------------------------------------------
1.32.1 - March 2006
- New Intel logos.
- Added Pentium D 925, Pentium EE 965.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.32 - February 2006
- Athlon FX-60 detection added.
- Athlon64 new memory dividers.
- Celeron 35x Cedar Mill, Pentium D 805.
- Core Solo & Core Duo detection improved.
- VIA C7 CPU detection added.
- Intel i975X, i945GT chipsets support.
- ATI RD580 chipset support.
- ULi smbus support improved.
- Fix smbus conflict with ClockGen.
--------------------------------------------------------------------------------------------------
1.31 - November 2005
- Improved support for ATI RS480/482 chipsets.
- GeForce 6100/6150 (nForce 410/430) chipsets support.
- Intel E7520 chipset support.
- New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler,
Intel Xeon Paxville, Intel Pentium M Yonah SC & DC.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.30 - August 2005
- Latest Sempron and Turion support improved.
- Intel Xeon Potomac, Pentium M 780 support.
- Improved Windows version report.
- Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges.
- Increased clocks refresh rate.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.29 - June 2005
- New PCI devices report.
- Switch for VCore report in .ini file.
- VCore report on some uGuru mainboards.
- Improved clocks computation.
- Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T).
- Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset.
- Improved stability when several instances of CPU-Z are running in the same time.
- Restored html report in ghost mode (see "Parameters" chapter above).
--------------------------------------------------------------------------------------------------
1.28.6 - March 2005
- Support for Athlon 64 X2 CPUs
- Support for i955X chipset
- Bunch of bugs
--------------------------------------------------------------------------------------------------
1.28 - March 2005
- Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656
- Support for nVidia nForce4 SLI Intel Edition
- Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252
- New F7 key to simplifiy the creation of the validation file
--------------------------------------------------------------------------------------------------
1.27 - February 2005
- Support for Intel Pentium 4 6xx CPUs.
- New validation system.
- Hundred of bug fixes.
--------------------------------------------------------------------------------------------------
1.26 - December 2004
- VCore display on Pentium M CPUs.
- New CPU clock computation.
- Improved support of Transmeta CPUs.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.25 - November 2004
- nVidia nForce4 chipset support
- Intel Pentium 4J support
- New button to refresh memory timings
- Several bugs fixed
--------------------------------------------------------------------------------------------------
1.24 - September 2004
- AMD Sempron support
- New memory SPD page
- PCI-Express graphic interface support
- Configuration file
- External cache latency tool
- Restored html report
- Fix several bugs
--------------------------------------------------------------------------------------------------
1.23 - June 2004
- Intel i915P/G, i925X chipsets support
- Intel LGA775 CPUs support
- Intel's CPU number display
- New AMD Athlon 64 steppings
- New report in one file
--------------------------------------------------------------------------------------------------
1.22 - April 2004
- New CPUs : Xeon Nocona, Celeron Prescott
- DDR2 memory support
- Clock mode when iconized
--------------------------------------------------------------------------------------------------
1.21 - January 2004
- one file package
- Windows 64 support
- new chipsets support
- new CPU support : Celeron M, Pentium 4 "Prescott"
--------------------------------------------------------------------------------------------------
1.20a - October 2003
- memory frequency and ratio on nForce2
- KT600 support
- W83627THF VRM mode
- SPD read improvement
- Fix some memory leaks (DMI)
- Fix memory size report
- Fix AGP side band status
--------------------------------------------------------------------------------------------------
Voila je voudrais changer ma carte graphique par une GeForce GTX 560 Ti (http://www.pc-look.com/boutik/product_info.php?products_id=56084&referer=pricerunner) et je voudrais savoir si elle serai compatible avec ma carte mere et mon processeur.
J'ai fait une analyse avec CPUz pour les caractéristiques de mon PC mais je comprends pas tres bien tout ce qui est écrit.
Merci d'avance pour vos réponses ^^
CPU-Z Readme file
------------------
Version 1.57
February 2011
Contact : cpuz@cpuid.com
Web page: https://www.cpuid.com/softwares/cpu-z.html
Validation page : https://valid.x86.fr/
Hall of Fame : https://valid.x86.fr/records.php
Forum : http://forum.canardpc.com/forumdisplay.php?f=74
CPUID SDK : http://www.cpuid-pro.com/devkits.php
Configuration file (cpuz.ini)
------------------------------
The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=1
MaxPCIBus=256
DMI=1
Sensor=1
SMBus=1
Display=1
ShowDutyCycles=0
UseDisplayAPI=1
- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable.
- PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable.
- SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable.
- Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable.
- ShowDutyCycles : Set to 1, switches the alternate clock computation method based on duty cycles. 0 to disable.
- UseDisplayAPI : Set to 1, uses the display driver to read the display adapters information.
Parameters
----------
-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.
-html=filename : Same as "-txt" except it generates the html report.
-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).
Keys
----
F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory
Cache Latency Tool
------------------
The cache latency tool can be downloaded at that address : http://www.cpuid.com/medias/files/softwares/misc/latency.zip
History
-------
--------------------------------------------------------------------------------------------------
1.57 - February 2011
- Intel Xeon "Westmere-EX" support.
- GPU frequency report on Intel Sandy Bridge processor.
- AMD Zacate/Ontario processors support.
- Report TDP on main page when available.
- Cores clocks on floating menu.
- P67/H67 stepping report.
--------------------------------------------------------------------------------------------------
1.56 - October 2010
- Intel Core i3/i5/i7 "2000" serie processors (Sandy Bridge) with new logos.
- Intel Core i7 970 "Gulftown".
- Intel P67 chipset.
- AMD Phenom II, Athlon II and Sempron II "Caspian" processors.
--------------------------------------------------------------------------------------------------
1.55 - July 2010
- VIA VX900/VX900M and VN1000/VN1000M chipsets.
- Intel Core i5-760, Core i7-875K and Core i5-655K processors.
- Intel Core i7-940XM, 840QM, 740QM mobile processors.
- Intel Core i5-450M, 540UM, 430UM, Core i3-370M mobile processors.
- Intel Pentium P6000 processor.
- New parameter in cpuz.ini : UseDisplayAPI
--------------------------------------------------------------------------------------------------
1.54 - March 2010
- Intel Core i7-880, Core i5-680, Core i3-550 processors.
- Intel Xeon 5600 line (32nm) processors.
- AMD Phenom II X6, Sempron II, Turion II, Turion II Ultra and Athlon II Mobile "Caspian" processors.
- NVIDIA GeForce 320M chipset.
- AMD 870/880G/890GX + SB800/SB850 chipset.
- Introduction of validation rooms.
--------------------------------------------------------------------------------------------------
1.53 - December 2009
- Fix validation issue with AMD Phenom processors (1.53.1).
- Preliminary support for Intel Pinetrail platform (1.53.1).
- Intel Core i7 930 & 950, Core i7 980X "Gulftown", Xeon W3565.
- Intel Mobile Core i7/i5/i3 "Arrendale" (LV and ULV).
- Intel "Clarkdale" platform improved support.
- AMD Phenom FX-5000, Athlon II X2/X3/X4, Athlon L110.
- AMD AM3 socket detection improved.
- VIA VX800 and VX855 chipsets support.
- ATI Radeon 2100 and Radeon X1250 support.
- DirectX 11 detection fix.
- Hardware virtualization support now reported as instructions set.
- New HTML report with less information.
--------------------------------------------------------------------------------------------------
1.52 - July 2009
- Fix Core i7 clock bug (1.52.2)
- New design with "Graphics" tab.
- NVIDIA nForce 980a chipset support.
- Intel Core i5 and Core i3 processors.
- Intel Atom Z530, Pentium DC E6300 (2.8GHz) and Core 2 Solo processors.
- Intel P55 and US15W chipsets preliminary support.
- AMD Phenom TWKR support.
- AMD Phenom X2 "Callisto" and Athlon X2 "Regor" processors.
- AMD Opteron 6-core "Istanbul" processor.
- Improved support for Windows 7.
- New Intel logos.
MD5 checksum : please refer to https://www.cpuid.com/softwares/cpu-z.html#history
--------------------------------------------------------------------------------------------------
1.51 - April 2009
- New version with installer.
- NVIDIA ION platform.
- Intel "Clarkdale" processor preliminary support.
MD5 checksum : please refer to https://www.cpuid.com/softwares/cpu-z.html#history
--------------------------------------------------------------------------------------------------
1.50 - February 2009
- Improved support for AMD Phenom II processor.
- Support for NVIDIA 740i chipset.
- Several bug fixes.
MD5 cpuz.exe (1.50) : E1C827C54F527404EDDA6D65DA0280D8
--------------------------------------------------------------------------------------------------
1.49 - December 2008
- AMD Phenom II processor.
- New Intel Core 2 models.
- Improved loading time.
- New online validation process.
MD5 cpuz.exe (1.49) : B836E86B40D7AFAF99D9C512E8CC9FEF
--------------------------------------------------------------------------------------------------
1.48 - October 2008
- Improved support for Intel Core i7 (Bloomfield & Gainestown).
- Intel Atom dual-core version support.
- AMD Athlon "Kuma" processor support.
- Alternate clock computation method based on "duty cycles" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini)
MD5 cpuz.exe (1.48) : DB78FBF1F99B7709240B495E59758CCE
--------------------------------------------------------------------------------------------------
1.47 - August 2008
- Intel Core i7 processor.
- Intel Core 2 Duo S Mobile processors.
- NVIDIA MCP79/7A chipset.
- AMD 790GX / SB750 chipset.
MD5 cpuz.exe (1.47) : A7484EFA3C32BC968C248CB1237FF493
--------------------------------------------------------------------------------------------------
1.46 - June 2008
- AMD Puma platform (Turion & Turion Ultra "Griffin");
- AMD Black Edition processors.
- Intel Xeon EX "Dunnington".
MD5 cpuz.exe (1.46) : C47432C41EC26156128F7B8E09E884CF
--------------------------------------------------------------------------------------------------
1.45 - May 2008
- Intel Atom Z500/Z510/Z520/Z530/Z540 processors.
- Intel Core 2 Duo E7x00 processor.
- AMD 45 nm Phenom (Dened & Shanghai) processors.
- Intel P45 chipset.
MD5 cpuz.exe (1.45) : DD4E540C04297CF93DC721166C13446E
--------------------------------------------------------------------------------------------------
1.44.2 - Mars 2008
- NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2)
- Intel G35 chipset (1.44.2)
- Updated support for VIA chipsets (1.44.2)
- Support for the new validator (1.44.1)
- Preliminary support for VIA Isaiah processor.
- Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden.
- Memory timings on Intel 5400A/B MCH (Skulltrail).
- Fix AMD Phenom detection issue on Windows Vista 64.
MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6
--------------------------------------------------------------------------------------------------
1.43 - January 2008
- Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH).
- Intel X48 chipset detection.
- AMD Athlon 64-LE 1600 and 1620 support.
- Fix detection issues on unlocked Phenom (ES/BE).
--------------------------------------------------------------------------------------------------
1.42 - November 2007
- Intel Wolfdale/Yorkfield/Penryn CPUs support.
- AMD Phenom and Opteron Barcelona support improved.
- Current core selection menu (right click on the CPU page).
- Loading progress.
--------------------------------------------------------------------------------------------------
1.41 - September 2007
- New CPU voltage monitoring.
- Intel Xeon Tigerton support.
- Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe).
- AMD K10 Phenom preliminary support.
- NVIDIA MCP73 support.
- Intel XMP profiles support.
- Memory modules nominal voltage.
--------------------------------------------------------------------------------------------------
1.40.5 - July 2007
- NVIDIA nForce 560 chipset support.
- Intel Dynamic FSB technology support.
- Athlon 64 X2 BE & Sempron LE (TDP 45W).
- SiS671/FX/DX/MX northbridge support.
- SiS968 southbridge support.
--------------------------------------------------------------------------------------------------
1.40 - May 2007
- VIA P4M800CE chipset support.
- Preliminary support for Intel Penryn CPUs family (45 nm).
- Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition.
- Intel P35, G33, G31, Q35, Q33, X38 chipsets support.
- Intel GL960/GM965/PM965 chipsets support.
- AMD Athlon 64 "Lima" processor support.
- AMD Geode LX processor support.
- NVIDIA nForce 520 chipset support.
- New parameter "-console" to generate output in a command prompt (Windows XP only).
- New icon.
--------------------------------------------------------------------------------------------------
1.39 - February 2007
- Windows Vista 64 support.
- VIA CX700/VX700 chipset.
- Added Merom XE (X7900/X7800)
- Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning.
- Added "-core" parameter to display the clock speed of the specified core.
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.38 - November 2006
- VIA P4M890 and P4M900 chipsets.
- NVIDIA 650i and 680i chipset.
- AMD Athlon 64 FX-7x processor.
- Core 2 Duo E6850, E6750, E6650 processors.
- socket 775 Xeon processor.
- New parameters "-txt" and "-html" (see above).
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.37 - October 2006
- Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support.
- Changed SSE4 to SSSE3 (Supplemental SSE3).
- Added VIA VT8237A southbridge.
- New HTML report.
- Several bug fixes.
--------------------------------------------------------------------------------------------------
1.36 - August 2006
- New processor information display.
- Intel 5000X/P/Z/V SPD support.
- Intel Pentium D 925 & 945.
--------------------------------------------------------------------------------------------------
1.35 - June 2006
- ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support.
- ATI SB600 southbridge support.
- Intel P965 chipset support.
- Engineering samples Core based CPUs report.
- Windows Vista product line report.
--------------------------------------------------------------------------------------------------
1.34.1 - May 2006
- AMD socket AM2/S1/F (rev F.) CPUs support.
- Enhanced Performance Profile (EPP) memory information report.
- Added Trc (bank cycle time) in DDR2 SPD report.
- Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets.
- FB-DIMM DDR2 SPD information report.
- Core 2 Duo names and logos added.
- Turion 64 X2 logo added.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.33.1 - April 2006
- Intel i965 chipset support added.
- Fix SPD detection problem on SiS 964/965/966 southbridges.
- ODC (Odd Divisor Correct) for Athlon64 rev E.
--------------------------------------------------------------------------------------------------
1.33 - April 2006
- Memory Command Rate timing added.
- Improved support for Intel Conroe/Merom CPUs.
- Celeron M 420/430 Yonah.
- Xeon Dual core Dempsey.
- VIA C7-M CPU detection added.
- VIA PT880, PT880 Pro, K8T900 chipsets support.
- nVidia nForce 550/560/570 (MCP55) chipset support.
- VIA VT8251 southbridge support.
- Fixed HyperTransport information misreports (in dump file).
- Added K6-2 and K6-III logos.
--------------------------------------------------------------------------------------------------
1.32.1 - March 2006
- New Intel logos.
- Added Pentium D 925, Pentium EE 965.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.32 - February 2006
- Athlon FX-60 detection added.
- Athlon64 new memory dividers.
- Celeron 35x Cedar Mill, Pentium D 805.
- Core Solo & Core Duo detection improved.
- VIA C7 CPU detection added.
- Intel i975X, i945GT chipsets support.
- ATI RD580 chipset support.
- ULi smbus support improved.
- Fix smbus conflict with ClockGen.
--------------------------------------------------------------------------------------------------
1.31 - November 2005
- Improved support for ATI RS480/482 chipsets.
- GeForce 6100/6150 (nForce 410/430) chipsets support.
- Intel E7520 chipset support.
- New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler,
Intel Xeon Paxville, Intel Pentium M Yonah SC & DC.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.30 - August 2005
- Latest Sempron and Turion support improved.
- Intel Xeon Potomac, Pentium M 780 support.
- Improved Windows version report.
- Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges.
- Increased clocks refresh rate.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.29 - June 2005
- New PCI devices report.
- Switch for VCore report in .ini file.
- VCore report on some uGuru mainboards.
- Improved clocks computation.
- Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T).
- Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset.
- Improved stability when several instances of CPU-Z are running in the same time.
- Restored html report in ghost mode (see "Parameters" chapter above).
--------------------------------------------------------------------------------------------------
1.28.6 - March 2005
- Support for Athlon 64 X2 CPUs
- Support for i955X chipset
- Bunch of bugs
--------------------------------------------------------------------------------------------------
1.28 - March 2005
- Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656
- Support for nVidia nForce4 SLI Intel Edition
- Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252
- New F7 key to simplifiy the creation of the validation file
--------------------------------------------------------------------------------------------------
1.27 - February 2005
- Support for Intel Pentium 4 6xx CPUs.
- New validation system.
- Hundred of bug fixes.
--------------------------------------------------------------------------------------------------
1.26 - December 2004
- VCore display on Pentium M CPUs.
- New CPU clock computation.
- Improved support of Transmeta CPUs.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.25 - November 2004
- nVidia nForce4 chipset support
- Intel Pentium 4J support
- New button to refresh memory timings
- Several bugs fixed
--------------------------------------------------------------------------------------------------
1.24 - September 2004
- AMD Sempron support
- New memory SPD page
- PCI-Express graphic interface support
- Configuration file
- External cache latency tool
- Restored html report
- Fix several bugs
--------------------------------------------------------------------------------------------------
1.23 - June 2004
- Intel i915P/G, i925X chipsets support
- Intel LGA775 CPUs support
- Intel's CPU number display
- New AMD Athlon 64 steppings
- New report in one file
--------------------------------------------------------------------------------------------------
1.22 - April 2004
- New CPUs : Xeon Nocona, Celeron Prescott
- DDR2 memory support
- Clock mode when iconized
--------------------------------------------------------------------------------------------------
1.21 - January 2004
- one file package
- Windows 64 support
- new chipsets support
- new CPU support : Celeron M, Pentium 4 "Prescott"
--------------------------------------------------------------------------------------------------
1.20a - October 2003
- memory frequency and ratio on nForce2
- KT600 support
- W83627THF VRM mode
- SPD read improvement
- Fix some memory leaks (DMI)
- Fix memory size report
- Fix AGP side band status
--------------------------------------------------------------------------------------------------
A voir également:
- Changer ma carte graphique
- Changer dns - Guide
- Changer carte graphique - Guide
- Pile carte mere - Guide
- Carte d'identité - Accueil - Services publics
- Changer code carte sim - Guide
5 réponses
nicolebarjot 16 jun 2011 à 16:11
Ah oui désoler voici la bonne analyse:
--------[ AIDA64 Extreme Edition ]--------------------------------------------------------------------------------------
Version AIDA64 v1.70.1400/fr
Module de test 2.7.345-x64
Site web https://www.aida64.com/
Type de rapport Rapport rapide [ TRIAL VERSION ]
Ordinateur NICOLAS-HP
Générateur Nicolas
Système d'exploitation Microsoft Windows 7 Home Premium 6.1.7601 (Win7 RTM)
Date 2011-06-16
Heure 16:10
--------[ Résumé ]------------------------------------------------------------------------------------------------------
Ordinateur:
Type de système ACPI x64-based PC
Système d'exploitation Microsoft Windows 7 Home Premium
Service Pack du système [ TRIAL VERSION ]
Internet Explorer 9.0.8112.16421 (IE 9.0)
DirectX DirectX 11.0
Nom du système NICOLAS-HP
Nom de l'utilisateur Nicolas
Domaine de connexion [ TRIAL VERSION ]
Date / Heure 2011-06-16 / 16:10
Carte mère:
Type de processeur DualCore Intel Core i5-650, 3333 MHz (25 x 133)
Nom de la carte mère MSI 2A9C
Chipset de la carte mère Intel Ibex Peak H57, Intel Ironlake
Mémoire système [ TRIAL VERSION ]
DIMM1: Micron 8JTF25664AZ-1G4D1 2 Go DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)
DIMM2: Micron 8JTF25664AZ-1G4D1 [ TRIAL VERSION ]
DIMM3: Micron 8JTF25664AZ-1G4D1 [ TRIAL VERSION ]
Type de BIOS AMI (11/05/10)
Moniteur:
Carte vidéo NVIDIA GeForce 405 (1024 Mo)
Carte vidéo NVIDIA GeForce 405 (1024 Mo)
Accélérateur 3D nVIDIA GeForce 405
Moniteur BenQ G922HDL [19" LCD] (BCA02825026)
Multimédia:
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio Realtek ALC888 @ Intel Ibex Peak PCH - High Definition Audio Controller [B-3]
Stockage:
Contrôleur de stockage Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Series SATA RAID Controller
Disque dur Generic- Compact Flash USB Device
Disque dur Generic- MS/MS-Pro USB Device
Disque dur Generic- SD/MMC USB Device
Disque dur Generic- SM/xD-Picture USB Device
Disque dur ST31000528AS (1000 Go, 7200 RPM, SATA-II)
Lecteur optique DTSoftBusCd00
Lecteur optique hp DVD A DH16ABLH
État des disques durs SMART OK
Partitions:
C: (NTFS) [ TRIAL VERSION ]
D: (NTFS) 14182 Mo (1750 Mo libre)
Taille totale [ TRIAL VERSION ]
Entrée:
Clavier Périphérique clavier PIH
Souris Souris HID
Réseau:
Adresse IP principale [ TRIAL VERSION ]
Adresse MAC principale 68-A3-C4-1A-39-DC
Carte réseau 802.11n Wireless LAN Card (192. [ TRIAL VERSION ])
Carte réseau Realtek PCIe GBE Family Controller
Périphériques:
Imprimante Fax
Imprimante Microsoft XPS Document Writer
Imprimante PDF Complete
Contrôleur FireWire VIA OHCI Compliant IEEE 1394 Host Controller (PHY: VIA VT6307)
Contrôleur USB2 Intel Ibex Peak PCH - USB 2.0 EHCI Controller 1 [B-3]
Contrôleur USB2 Intel Ibex Peak PCH - USB 2.0 EHCI Controller 2 [B-3]
Périphérique USB Generic USB Hub
Périphérique USB Generic USB Hub
Périphérique USB Périphérique d'entrée USB
Périphérique USB Périphérique d'entrée USB
Périphérique USB Périphérique d'entrée USB
Périphérique USB Périphérique de stockage de masse USB
Périphérique USB Périphérique USB composite
DMI:
Distributeur du BIOS American Megatrends Inc.
Version du BIOS 6.14
Fabricant du système Hewlett-Packard
Nom du système p6721fr
Version du système xxx0204GRxxxxxxxx0
Numéro de série du système [ TRIAL VERSION ]
UUID du système [ TRIAL VERSION ]
Fabricant de la carte mère MSI
Nom de la carte mère 2A9C
Version de la carte mère 1.1
Numéro de série de la carte mère [ TRIAL VERSION ]
Fabricant du châssis Hewlett-Packard
Version du châssis
Numéro de série du châssis [ TRIAL VERSION ]
Identifiant du châssis [ TRIAL VERSION ]
Type du châssis Desktop Case
Ah oui désoler voici la bonne analyse:
--------[ AIDA64 Extreme Edition ]--------------------------------------------------------------------------------------
Version AIDA64 v1.70.1400/fr
Module de test 2.7.345-x64
Site web https://www.aida64.com/
Type de rapport Rapport rapide [ TRIAL VERSION ]
Ordinateur NICOLAS-HP
Générateur Nicolas
Système d'exploitation Microsoft Windows 7 Home Premium 6.1.7601 (Win7 RTM)
Date 2011-06-16
Heure 16:10
--------[ Résumé ]------------------------------------------------------------------------------------------------------
Ordinateur:
Type de système ACPI x64-based PC
Système d'exploitation Microsoft Windows 7 Home Premium
Service Pack du système [ TRIAL VERSION ]
Internet Explorer 9.0.8112.16421 (IE 9.0)
DirectX DirectX 11.0
Nom du système NICOLAS-HP
Nom de l'utilisateur Nicolas
Domaine de connexion [ TRIAL VERSION ]
Date / Heure 2011-06-16 / 16:10
Carte mère:
Type de processeur DualCore Intel Core i5-650, 3333 MHz (25 x 133)
Nom de la carte mère MSI 2A9C
Chipset de la carte mère Intel Ibex Peak H57, Intel Ironlake
Mémoire système [ TRIAL VERSION ]
DIMM1: Micron 8JTF25664AZ-1G4D1 2 Go DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)
DIMM2: Micron 8JTF25664AZ-1G4D1 [ TRIAL VERSION ]
DIMM3: Micron 8JTF25664AZ-1G4D1 [ TRIAL VERSION ]
Type de BIOS AMI (11/05/10)
Moniteur:
Carte vidéo NVIDIA GeForce 405 (1024 Mo)
Carte vidéo NVIDIA GeForce 405 (1024 Mo)
Accélérateur 3D nVIDIA GeForce 405
Moniteur BenQ G922HDL [19" LCD] (BCA02825026)
Multimédia:
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio nVIDIA HDMI/DP @ nVIDIA GT218 - High Definition Audio Controller
Carte audio Realtek ALC888 @ Intel Ibex Peak PCH - High Definition Audio Controller [B-3]
Stockage:
Contrôleur de stockage Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Series SATA RAID Controller
Disque dur Generic- Compact Flash USB Device
Disque dur Generic- MS/MS-Pro USB Device
Disque dur Generic- SD/MMC USB Device
Disque dur Generic- SM/xD-Picture USB Device
Disque dur ST31000528AS (1000 Go, 7200 RPM, SATA-II)
Lecteur optique DTSoftBusCd00
Lecteur optique hp DVD A DH16ABLH
État des disques durs SMART OK
Partitions:
C: (NTFS) [ TRIAL VERSION ]
D: (NTFS) 14182 Mo (1750 Mo libre)
Taille totale [ TRIAL VERSION ]
Entrée:
Clavier Périphérique clavier PIH
Souris Souris HID
Réseau:
Adresse IP principale [ TRIAL VERSION ]
Adresse MAC principale 68-A3-C4-1A-39-DC
Carte réseau 802.11n Wireless LAN Card (192. [ TRIAL VERSION ])
Carte réseau Realtek PCIe GBE Family Controller
Périphériques:
Imprimante Fax
Imprimante Microsoft XPS Document Writer
Imprimante PDF Complete
Contrôleur FireWire VIA OHCI Compliant IEEE 1394 Host Controller (PHY: VIA VT6307)
Contrôleur USB2 Intel Ibex Peak PCH - USB 2.0 EHCI Controller 1 [B-3]
Contrôleur USB2 Intel Ibex Peak PCH - USB 2.0 EHCI Controller 2 [B-3]
Périphérique USB Generic USB Hub
Périphérique USB Generic USB Hub
Périphérique USB Périphérique d'entrée USB
Périphérique USB Périphérique d'entrée USB
Périphérique USB Périphérique d'entrée USB
Périphérique USB Périphérique de stockage de masse USB
Périphérique USB Périphérique USB composite
DMI:
Distributeur du BIOS American Megatrends Inc.
Version du BIOS 6.14
Fabricant du système Hewlett-Packard
Nom du système p6721fr
Version du système xxx0204GRxxxxxxxx0
Numéro de série du système [ TRIAL VERSION ]
UUID du système [ TRIAL VERSION ]
Fabricant de la carte mère MSI
Nom de la carte mère 2A9C
Version de la carte mère 1.1
Numéro de série de la carte mère [ TRIAL VERSION ]
Fabricant du châssis Hewlett-Packard
Version du châssis
Numéro de série du châssis [ TRIAL VERSION ]
Identifiant du châssis [ TRIAL VERSION ]
Type du châssis Desktop Case
Utilisateur anonyme
J'ai supprimé tout ce qu'il y avait d'inutile ;-)
Pas de problème, tu peux mettre une GTX 560 Ti dans ce Pc, ça devrait très bien marcher.
(lol, les constructeurs de marque avec leurs cartes-graphique bas de gamme, y en a pas un pour rattraper l'autre, ils préfèrent mettre 2 fois trop de RAM et une mauvaise carte-graphique que le contraire)
Edit: Arf... L'alimentation, c'est elle qui risque de ne pas suffire pour une GTX 560 Ti, pour bien faire il faudrait 450-500W en 80+, pas une alim 300W no name de Pc de marque.
Avant de poser une question: 1° Allume ton cerveau ton Pc ne pense pas à ta place!
2° Google est ton ami, le moteur de recherche de CCM aussi, fais une recherche!
(lol, les constructeurs de marque avec leurs cartes-graphique bas de gamme, y en a pas un pour rattraper l'autre, ils préfèrent mettre 2 fois trop de RAM et une mauvaise carte-graphique que le contraire)
Edit: Arf... L'alimentation, c'est elle qui risque de ne pas suffire pour une GTX 560 Ti, pour bien faire il faudrait 450-500W en 80+, pas une alim 300W no name de Pc de marque.
Avant de poser une question: 1° Allume ton cerveau ton Pc ne pense pas à ta place!
2° Google est ton ami, le moteur de recherche de CCM aussi, fais une recherche!
Donc j'aurais rien a changé ni la carte mere ni le processeur. Tant mieu cela coute assez cher comme ça une carte graphique^^
En tout cas merci pour ta confirmation :)
En tout cas merci pour ta confirmation :)
La GTX 560 Ti a besoin de 2 alimentations PCI-E 6 pins... Et j'ai oublié de corriger, la Power CX 400W n'a qu'une seule alimentation PCI-E, celle d'origine de ton Pc n'en a aucune et de toutes façons, elle n'est pas assez puissante.
Si tu es juste niveau budget, tu peux aussi prendre une GTX 460 + alimentation, moins chère que la GTX 560 Ti, elle ira très bien avec le reste de ta config.
Alim: Alimentation PC Corsair CX600 V2
C-G: GTX 460 - Clubic.com
Si tu es juste niveau budget, tu peux aussi prendre une GTX 460 + alimentation, moins chère que la GTX 560 Ti, elle ira très bien avec le reste de ta config.
Alim: Alimentation PC Corsair CX600 V2
C-G: GTX 460 - Clubic.com
Bonjour,
Disons que le fichier que tu nous a filé, c'est pas ta config, c'est le fichier qui sert à configurer CPU-Z =)
Disons que le fichier que tu nous a filé, c'est pas ta config, c'est le fichier qui sert à configurer CPU-Z =)
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Salut
Heu... Elle est où ta configuration? Le fichier Readme de CPU-Z c'est la configuration... Du logiciel, pas de ton Pc ^^
Soit tu fais ça avec AIDA64 ou alors tu fais une détection en ligne sur ma-config.com
Heu... Elle est où ta configuration? Le fichier Readme de CPU-Z c'est la configuration... Du logiciel, pas de ton Pc ^^
Soit tu fais ça avec AIDA64 ou alors tu fais une détection en ligne sur ma-config.com
