Search user manual for universal remote
TOTO
-
jimkiller Posted messages 2177 Status Membre -
jimkiller Posted messages 2177 Status Membre -
Hello,
I'm looking for the manual for the universal remote SIPLEC RC61 from LECLERC,
I have the codes, but I'm missing the manual to enter the codes manually? The automatic method
doesn't work!!!
Thank you in advance
Configuration: Windows XP / Safari 534.13
I'm looking for the manual for the universal remote SIPLEC RC61 from LECLERC,
I have the codes, but I'm missing the manual to enter the codes manually? The automatic method
doesn't work!!!
Thank you in advance
Configuration: Windows XP / Safari 534.13
2 réponses
Hello, try this:
In the list, choose the brand of the TV
1) Turn on the TV.
2) Press the Set button (grey button, on the left below the blue arrows). Hold it down and then press the TV Device button (blue button, at the top left).
3) Enter the first 3-digit code corresponding to the brand of the TV. The red Power LED will light up immediately and stay on. Release both buttons.
4) If the Power LED does not light up, repeat with another code starting from step 2 as many times as necessary.
5) Check that the entered code allows you to control all the TV functions correctly. If not, repeat with another code starting from step 2 as many times as necessary.
If none of the codes corresponding to the TV allow for proper operation or if the brand of the TV is not in the list, use the automatic search method.
Code entry via automatic search:
1) Turn on the TV
2) Press the Set button (grey button, on the left below the blue arrows). Hold it down. Simultaneously, press the TV Device button (blue button, at the top left) and hold it down for more than 3 seconds, then release both buttons. The remote will start the automatic search, the LED will blink and the remote will automatically send the power signal every 2 seconds.
3) When the LED stops blinking, check if the TV responds to the remote; when the TV responds, press any button except for the Set button to end the automatic search.
4) Try the other buttons to verify. If you do not achieve proper operation of most buttons, start again from step 2 using the automatic search to find the best code as many times as necessary.
Code entry via manual search:
1) Turn on the TV
2) Press the Set button (grey button, on the left below the blue arrows). Hold it down. Simultaneously, press the TV Device button (blue button, at the top left), then release both buttons. The power LED will light up.
3) Press the Power button repeatedly until the TV turns off.
4) Try the different buttons to check their functionality. If you do not achieve proper operation of most buttons, start again from step 2 using the manual search to find the best code as many times as necessary.
Notes:
1) During the search, you can press the Set button to reverse the search direction and find the correct code more quickly. If you do not want to change the search direction, do not press the Set button during the manual search.
2) To exit the search mode, press the TV Device button and the LED will turn off.
3) In search mode, except for the POWER button, other buttons can be tested normally. This means that you can test other buttons without exiting the search mode.
4) The remote will automatically exit search mode if no buttons are pressed for 30 seconds.
Reset
This function clears the programmed configuration data.
1) Press the Set button and hold it down.
2) Then press the 0 button and hold it down for more than 3 seconds.
3) Then release both buttons, the LED blinks 2 times then turns off. The remote is reset.
General remarks regarding universal remote controls:
.
It is not uncommon for a remote control and the device you want to control to be incompatible. In this case, even search methods won't help.
It may happen that certain functions are not available even after trying several codes.
Searching for and setting channels depend on the television. For this reason, no remote control manual can explain how to proceed. You must refer to the TV manual or, if not available, proceed by trial and error.
--
Twenty years of boxing, one fight... and only one defeat! LOL
In the list, choose the brand of the TV
1) Turn on the TV.
2) Press the Set button (grey button, on the left below the blue arrows). Hold it down and then press the TV Device button (blue button, at the top left).
3) Enter the first 3-digit code corresponding to the brand of the TV. The red Power LED will light up immediately and stay on. Release both buttons.
4) If the Power LED does not light up, repeat with another code starting from step 2 as many times as necessary.
5) Check that the entered code allows you to control all the TV functions correctly. If not, repeat with another code starting from step 2 as many times as necessary.
If none of the codes corresponding to the TV allow for proper operation or if the brand of the TV is not in the list, use the automatic search method.
Code entry via automatic search:
1) Turn on the TV
2) Press the Set button (grey button, on the left below the blue arrows). Hold it down. Simultaneously, press the TV Device button (blue button, at the top left) and hold it down for more than 3 seconds, then release both buttons. The remote will start the automatic search, the LED will blink and the remote will automatically send the power signal every 2 seconds.
3) When the LED stops blinking, check if the TV responds to the remote; when the TV responds, press any button except for the Set button to end the automatic search.
4) Try the other buttons to verify. If you do not achieve proper operation of most buttons, start again from step 2 using the automatic search to find the best code as many times as necessary.
Code entry via manual search:
1) Turn on the TV
2) Press the Set button (grey button, on the left below the blue arrows). Hold it down. Simultaneously, press the TV Device button (blue button, at the top left), then release both buttons. The power LED will light up.
3) Press the Power button repeatedly until the TV turns off.
4) Try the different buttons to check their functionality. If you do not achieve proper operation of most buttons, start again from step 2 using the manual search to find the best code as many times as necessary.
Notes:
1) During the search, you can press the Set button to reverse the search direction and find the correct code more quickly. If you do not want to change the search direction, do not press the Set button during the manual search.
2) To exit the search mode, press the TV Device button and the LED will turn off.
3) In search mode, except for the POWER button, other buttons can be tested normally. This means that you can test other buttons without exiting the search mode.
4) The remote will automatically exit search mode if no buttons are pressed for 30 seconds.
Reset
This function clears the programmed configuration data.
1) Press the Set button and hold it down.
2) Then press the 0 button and hold it down for more than 3 seconds.
3) Then release both buttons, the LED blinks 2 times then turns off. The remote is reset.
General remarks regarding universal remote controls:
.
It is not uncommon for a remote control and the device you want to control to be incompatible. In this case, even search methods won't help.
It may happen that certain functions are not available even after trying several codes.
Searching for and setting channels depend on the television. For this reason, no remote control manual can explain how to proceed. You must refer to the TV manual or, if not available, proceed by trial and error.
--
Twenty years of boxing, one fight... and only one defeat! LOL