Dofus 2.0 sur disque dur externe
Fermé
San-koukai
Messages postés
1
Date d'inscription
samedi 19 février 2011
Statut
Membre
Dernière intervention
19 février 2011
-
19 févr. 2011 à 22:05
mamiemando Messages postés 33378 Date d'inscription jeudi 12 mai 2005 Statut Modérateur Dernière intervention 25 novembre 2024 - 28 févr. 2011 à 09:39
mamiemando Messages postés 33378 Date d'inscription jeudi 12 mai 2005 Statut Modérateur Dernière intervention 25 novembre 2024 - 28 févr. 2011 à 09:39
A voir également:
- Dofus 2.0 sur disque dur externe
- Cloner disque dur - Guide
- Defragmenter disque dur - Guide
- Chkdsk disque dur externe - Guide
- Remplacer disque dur par ssd - Guide
- Nettoyage disque dur - Guide
13 réponses
mamiemando
Messages postés
33378
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
25 novembre 2024
7 802
22 févr. 2011 à 21:59
22 févr. 2011 à 21:59
Je n'ai pas très bien compris le rapport entre la mémoire (RAM) et le disque externe. Ce n'est pas plutôt un problème d'espace disque ? Si oui la solution consisterait à installer dofus dans un environnement chrooté sur ton disque externe.
mamiemando
Messages postés
33378
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
25 novembre 2024
7 802
24 févr. 2011 à 12:20
24 févr. 2011 à 12:20
Il s'installe dans quel(s) répertoire(s) ? /usr/local ?
mamiemando
Messages postés
33378
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
25 novembre 2024
7 802
24 févr. 2011 à 20:22
24 févr. 2011 à 20:22
Et tu ne peux pas lui dire de s'installer ailleurs, par exemple sur ton disque externe ? Il te laisse le choix pour le répertoire d'installation ?
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
si. Je l'enregistre sur mon disque dur externe, je modifie les propriétés pour qu'il puisse se lancer comme un "..." je ne sais plus =$ bref, je le lance et aumoment de l'éxécution ca me marque que le média ne peut s'ouvrir, car les droits sur le disque dur externe sont limités à la lecture. Si je vais dans les propriétés de mon disque dur externe, je coche lecture et ecriture partout mais ca ne marche pas.
mamiemando
Messages postés
33378
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
25 novembre 2024
7 802
Modifié par mamiemando le 27/02/2011 à 05:33
Modifié par mamiemando le 27/02/2011 à 05:33
La barre verticale (alt gr 6) derrière dmesg c'était pas une faute de frappe :p. Il faut vraiment que tu la tapes juste après avoir branché ton disque.
Ensuite l'espace entre cat et /etc/fstab est important.
En l'état ce que tu m'as reporté est malheureusement inexploitable, mais je soupçonne ton disque d'être /dev/sdb1 et d'être monté dans /media/Nouveau. Ce qui me fait un peu hésiter c'est que c'est visiblement de l'ext2 ce qui est un drôle de choix (de l'ext3 voire 4 me paraît plus appropriée mais bon), mais apparemment vu le point de montage (/media/Nouveau) je crois que c'est clair :p
Ensuite il faudra probablement corriger la ligne qui figure dans /etc/fstab et qui se réfère à /dev/sdb1.
A priori je dirai qu'à terme elle doit ressembler à ceci (attention aux espaces et à la casse) :
Une fois la correction effectuée débranche et rebranche ton disque et normalement ça devrait rouler.
Bonne chance
Ensuite l'espace entre cat et /etc/fstab est important.
En l'état ce que tu m'as reporté est malheureusement inexploitable, mais je soupçonne ton disque d'être /dev/sdb1 et d'être monté dans /media/Nouveau. Ce qui me fait un peu hésiter c'est que c'est visiblement de l'ext2 ce qui est un drôle de choix (de l'ext3 voire 4 me paraît plus appropriée mais bon), mais apparemment vu le point de montage (/media/Nouveau) je crois que c'est clair :p
Ensuite il faudra probablement corriger la ligne qui figure dans /etc/fstab et qui se réfère à /dev/sdb1.
gksudo gedit /etc/fstab &
A priori je dirai qu'à terme elle doit ressembler à ceci (attention aux espaces et à la casse) :
/dev/sdb1 /media/Nouveau ext2 noauto,rw,user,users,uid=kevin 0 0
Une fois la correction effectuée débranche et rebranche ton disque et normalement ça devrait rouler.
Bonne chance
mamiemando
Messages postés
33378
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
25 novembre 2024
7 802
24 févr. 2011 à 20:46
24 févr. 2011 à 20:46
Ah ben c'est juste ça que tu dois corriger.
(quand le disque est branché et accessible en lecture). Juste après avoir branché ton disque reporte-moi le résultat de :
Accède à ton disque et donne moi le résultat de :
Dans l'idée on va corriger le fichier /etc/fstab conformément à ce qui est expliqué ici :
http://www.mistra.fr/tutoriel-linux-monter-peripherique.html
Si tu ne le sens pas je vais te guider une fois que tu m'auras reporté le résultat des trois commandes mentionnées ci-dessus.
Bonne chance
(quand le disque est branché et accessible en lecture). Juste après avoir branché ton disque reporte-moi le résultat de :
dmesg | tail
Accède à ton disque et donne moi le résultat de :
cat /etc/fstab mount
Dans l'idée on va corriger le fichier /etc/fstab conformément à ce qui est expliqué ici :
http://www.mistra.fr/tutoriel-linux-monter-peripherique.html
Si tu ne le sens pas je vais te guider une fois que tu m'auras reporté le résultat des trois commandes mentionnées ci-dessus.
Bonne chance
pr dmesg tail : 0.171536] pci 0000:00:1b.0: PME# disabled
[ 0.171654] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.171665] pci 0000:00:1c.0: PME# disabled
[ 0.171789] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.171800] pci 0000:00:1c.1: PME# disabled
[ 0.171919] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.171930] pci 0000:00:1c.2: PME# disabled
[ 0.172034] pci 0000:00:1d.0: reg 20: [io 0xe400-0xe41f]
[ 0.172121] pci 0000:00:1d.1: reg 20: [io 0xe480-0xe49f]
[ 0.172205] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f]
[ 0.172288] pci 0000:00:1d.3: reg 20: [io 0xe880-0xe89f]
[ 0.172501] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.172518] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.172529] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.172540] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff
[ 0.172598] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.172612] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.172626] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.172640] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.172654] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf]
[ 0.172699] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.172709] pci 0000:00:1f.2: PME# disabled
[ 0.172781] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.172897] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.172909] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.172921] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.172937] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.173066] pci 0000:03:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit]
[ 0.173117] pci 0000:03:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref]
[ 0.173176] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.173187] pci 0000:03:00.0: PME# disabled
[ 0.173221] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.173247] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.173258] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.173270] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.173284] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.173411] pci 0000:01:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit]
[ 0.173541] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.173563] pci 0000:00:1c.2: PCI bridge to [bus 01-02]
[ 0.173574] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.173586] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbefffff]
[ 0.173601] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.173710] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.173721] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.173734] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.173749] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.173759] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.173768] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.173778] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.173787] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff] (subtractive decode)
[ 0.173797] pci 0000:00:1e.0: bridge window [mem 0x1f810000-0xffffffff] (subtractive decode)
[ 0.173834] pci_bus 0000:00: on NUMA node 0
[ 0.173859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.174404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.174581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.174743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.190591] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.190966] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.191333] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.191695] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.192072] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.192441] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.192813] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.193180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.193344] HEST: Table is not found!
[ 0.193599] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.193631] vgaarb: loaded
[ 0.194185] SCSI subsystem initialized
[ 0.194370] libata version 3.00 loaded.
[ 0.194552] usbcore: registered new interface driver usbfs
[ 0.194595] usbcore: registered new interface driver hub
[ 0.194692] usbcore: registered new device driver usb
[ 0.195139] ACPI: WMI: Mapper loaded
[ 0.195147] PCI: Using ACPI for IRQ routing
[ 0.195221] PCI: pci_cache_line_size set to 64 bytes
[ 0.195365] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.195374] reserve RAM buffer: 000000001f780000 - 000000001fffffff
[ 0.195700] NetLabel: Initializing
[ 0.195708] NetLabel: domain hash size = 128
[ 0.195713] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.195752] NetLabel: unlabeled traffic allowed by default
[ 0.196208] hpet clockevent registered
[ 0.196220] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.196235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.196252] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.200068] Switching to clocksource tsc
[ 0.234021] AppArmor: AppArmor Filesystem Enabled
[ 0.234085] pnp: PnP ACPI init
[ 0.234148] ACPI: bus type pnp registered
[ 0.240340] pnp: PnP ACPI: found 13 devices
[ 0.240352] ACPI: ACPI bus type pnp unregistered
[ 0.240365] PnPBIOS: Disabled by ACPI PNP
[ 0.240409] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.240436] system 00:08: [io 0x0380-0x0383] has been reserved
[ 0.240446] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.240456] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.240466] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.240477] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.240487] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.240498] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.240515] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.240526] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.240543] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.240560] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.240578] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.240589] system 00:0c: [mem 0x000c0000-0x000d3fff] could not be reserved
[ 0.240599] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.240610] system 00:0c: [mem 0x00100000-0x1f7fffff] could not be reserved
[ 0.280102] pci 0000:00:1c.0: BAR 14: assigned [mem 0x1f900000-0x1fafffff]
[ 0.280119] pci 0000:00:1c.0: BAR 15: assigned [mem 0x1fb00000-0x1fcfffff 64bit pref]
[ 0.280132] pci 0000:00:1c.1: BAR 15: assigned [mem 0x1fd00000-0x1fefffff 64bit pref]
[ 0.280143] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.280153] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.280163] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.280172] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.280183] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.280196] pci 0000:00:1c.0: bridge window [mem 0x1f900000-0x1fafffff]
[ 0.280209] pci 0000:00:1c.0: bridge window [mem 0x1fb00000-0x1fcfffff 64bit pref]
[ 0.280224] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.280234] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.280247] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.280259] pci 0000:00:1c.1: bridge window [mem 0x1fd00000-0x1fefffff 64bit pref]
[ 0.280273] pci 0000:00:1c.2: PCI bridge to [bus 01-02]
[ 0.280283] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.280296] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbefffff]
[ 0.280308] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.280323] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.280329] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.280341] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.280351] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.280384] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.280402] alloc irq_desc for 16 on node -1
[ 0.280409] alloc kstat_irqs on node -1
[ 0.280429] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.280445] pci 0000:00:1c.0: setting latency timer to 64
[ 0.280465] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.280477] alloc irq_desc for 17 on node -1
[ 0.280483] alloc kstat_irqs on node -1
[ 0.280495] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.280506] pci 0000:00:1c.1: setting latency timer to 64
[ 0.280525] pci 0000:00:1c.2: enabling device (0106 -> 0107)
[ 0.280535] alloc irq_desc for 18 on node -1
[ 0.280541] alloc kstat_irqs on node -1
[ 0.280552] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.280562] pci 0000:00:1c.2: setting latency timer to 64
[ 0.280580] pci 0000:00:1e.0: setting latency timer to 64
[ 0.280593] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.280602] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.280610] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.280619] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000dffff]
[ 0.280628] pci_bus 0000:00: resource 8 [mem 0x1f810000-0xffffffff]
[ 0.280637] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.280645] pci_bus 0000:04: resource 1 [mem 0x1f900000-0x1fafffff]
[ 0.280655] pci_bus 0000:04: resource 2 [mem 0x1fb00000-0x1fcfffff 64bit pref]
[ 0.280664] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.280672] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.280682] pci_bus 0000:03: resource 2 [mem 0x1fd00000-0x1fefffff 64bit pref]
[ 0.280691] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.280699] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
[ 0.280708] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.280718] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.280726] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.280735] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.280743] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000dffff]
[ 0.280752] pci_bus 0000:05: resource 8 [mem 0x1f810000-0xffffffff]
[ 0.280871] NET: Registered protocol family 2
[ 0.281055] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.281664] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.281938] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.282209] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.282216] TCP reno registered
[ 0.282225] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.282248] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.282498] NET: Registered protocol family 1
[ 0.282547] pci 0000:00:02.0: Boot video device
[ 0.282691] PCI: CLS 16 bytes, default 64
[ 0.283179] cpufreq-nforce2: No nForce2 chipset.
[ 0.283272] Scanning for low memory corruption every 60 seconds
[ 0.283651] audit: initializing netlink socket (disabled)
[ 0.283685] type=2000 audit(1298622797.276:1): initialized
[ 0.320201] Trying to unpack rootfs image as initramfs...
[ 0.365193] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.370309] VFS: Disk quotas dquot_6.5.2
[ 0.370527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.372650] fuse init (API version 7.14)
[ 0.372981] msgmni has been set to 954
[ 0.383503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.383518] io scheduler noop registered
[ 0.383525] io scheduler deadline registered
[ 0.383582] io scheduler cfq registered (default)
[ 0.383953] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.384021] alloc irq_desc for 40 on node -1
[ 0.384028] alloc kstat_irqs on node -1
[ 0.384054] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.384285] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.384345] alloc irq_desc for 41 on node -1
[ 0.384351] alloc kstat_irqs on node -1
[ 0.384367] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.384571] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.384627] alloc irq_desc for 42 on node -1
[ 0.384634] alloc kstat_irqs on node -1
[ 0.384649] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.384922] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.385245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.385917] ACPI: AC Adapter [AC0] (off-line)
[ 0.386217] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.390694] ACPI: Lid Switch [LID]
[ 0.390921] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.390941] ACPI: Sleep Button [SLPB]
[ 0.391095] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.391109] ACPI: Power Button [PWRB]
[ 0.391263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.391276] ACPI: Power Button [PWRF]
[ 0.392114] ACPI: acpi_idle registered with cpuidle
[ 0.392231] Marking TSC unstable due to TSC halts in idle
[ 0.401355] Switching to clocksource hpet
[ 0.413912] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.413949] ACPI: Thermal Zone [TZ00] (35 C)
[ 0.414210] ERST: Table is not found!
[ 0.414697] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.419865] brd: module loaded
[ 0.427484] loop: module loaded
[ 0.428149] isapnp: Scanning for PnP cards...
[ 0.436443] ata_piix 0000:00:1f.2: version 2.13
[ 0.436490] alloc irq_desc for 19 on node -1
[ 0.436497] alloc kstat_irqs on node -1
[ 0.436517] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.436531] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.436640] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.448844] scsi0 : ata_piix
[ 0.492776] scsi1 : ata_piix
[ 0.510966] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.510982] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.518441] Fixed MDIO Bus: probed
[ 0.518573] PPP generic driver version 2.4.2
[ 0.518788] tun: Universal TUN/TAP device driver, 1.6
[ 0.518795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.519143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.519230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.519273] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.519397] alloc irq_desc for 23 on node -1
[ 0.519404] alloc kstat_irqs on node -1
[ 0.519425] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.519449] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.519461] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.519584] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.519669] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 0.520550] hub 1-0:1.0: USB hub found
[ 0.520569] hub 1-0:1.0: 2 ports detected
[ 0.520764] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.520783] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.520793] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.520935] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.521010] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 0.524231] hub 2-0:1.0: USB hub found
[ 0.524249] hub 2-0:1.0: 2 ports detected
[ 0.524422] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.524440] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.524450] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.524591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.524669] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 0.525057] hub 3-0:1.0: USB hub found
[ 0.525091] hub 3-0:1.0: 2 ports detected
[ 0.525254] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.525274] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.525284] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.525408] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.525476] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 0.525887] hub 4-0:1.0: USB hub found
[ 0.525903] hub 4-0:1.0: 2 ports detected
[ 0.526297] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.603805] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.652079] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.652556] mice: PS/2 mouse device common for all mice
[ 0.653192] rtc_cmos 00:03: RTC can wake from S4
[ 0.653329] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.653383] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.653784] device-mapper: uevent: version 1.0.3
[ 0.656855] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.670546] device-mapper: multipath: version 1.1.1 loaded
[ 0.670560] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.671108] EISA: Probing bus 0 at eisa.0
[ 0.671117] EISA: Cannot allocate resource for mainboard
[ 0.671126] Cannot allocate resource for EISA slot 1
[ 0.671133] Cannot allocate resource for EISA slot 2
[ 0.671140] Cannot allocate resource for EISA slot 3
[ 0.671147] Cannot allocate resource for EISA slot 4
[ 0.671154] Cannot allocate resource for EISA slot 5
[ 0.671161] Cannot allocate resource for EISA slot 6
[ 0.671168] Cannot allocate resource for EISA slot 7
[ 0.671174] Cannot allocate resource for EISA slot 8
[ 0.671181] EISA: Detected 0 cards.
[ 0.690361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.692435] ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66
[ 0.692446] ata2.00: 7815024 sectors, multi 0: LBA
[ 0.696192] cpuidle: using governor ladder
[ 0.696375] cpuidle: using governor menu
[ 0.697314] TCP cubic registered
[ 0.697830] NET: Registered protocol family 10
[ 0.703969] lo: Disabled Privacy Extensions
[ 0.704662] NET: Registered protocol family 17
[ 0.704823] Using IPI No-Shortcut mode
[ 0.705136] PM: Resume from disk failed.
[ 0.705169] registered taskstats version 1
[ 0.705648] Magic number: 15:728:574
[ 0.705850] rtc_cmos 00:03: setting system clock to 2011-02-25 08:33:18 UTC (1298622798)
[ 0.705860] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.705867] EDD information not available.
[ 0.709299] ata2.00: configured for UDMA/66
[ 0.860702] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 1.248083] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1.460403] isapnp: No Plug & Play device found
[ 1.460847] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
[ 1.461419] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.461720] sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 1.461883] sd 1:0:0:0: [sda] Write Protect is off
[ 1.461893] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.461965] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.462425] sda: sda1 sda2 < sda5 >
[ 1.464570] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.498986] ACPI: Battery Slot [BAT0] (battery present)
[ 1.584332] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2.106981] Freeing initrd memory: 10564k freed
[ 2.125947] Freeing unused kernel memory: 684k freed
[ 2.127490] Write protecting the kernel text: 4932k
[ 2.127612] Write protecting the kernel read-only data: 1976k
[ 2.183485] udev[69]: starting version 163
[ 2.945363] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 2.945373] Copyright (c) 2007 Atheros Corporation.
[ 2.945459] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.945483] atl2 0000:03:00.0: setting latency timer to 64
[ 3.072839] Initializing USB Mass Storage driver...
[ 3.073154] scsi2 : usb-storage 1-2:1.0
[ 3.074821] scsi3 : usb-storage 3-1:1.0
[ 3.079201] usbcore: registered new interface driver usb-storage
[ 3.079211] USB Mass Storage support registered.
[ 3.085154] Btrfs loaded
[ 3.145492] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.080871] scsi 2:0:0:0: Direct-Access Toshiba StorE HDD 0000 PQ: 0 ANSI: 4
[ 4.083327] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.087502] scsi 3:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 4.089048] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4.089242] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.093830] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.093843] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 4.093851] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.098855] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 4.104109] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.104133] sdb: sdb1
[ 5.907888] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.907902] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 8.246612] Adding 226300k swap on /dev/sda5. Priority:-1 extents:1 across:226300k
[ 8.368064] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.604320] udev[334]: starting version 163
[ 8.891746] lp: driver loaded but no devices found
[ 9.246161] eeepc_laptop: Eee PC Hotkey Driver
[ 9.246177] eeepc_laptop: model 701 does not officially support setting cpu speed
[ 9.246185] eeepc_laptop: cpufv disabled to avoid instability
[ 9.246208] eeepc_laptop: Hotkey init flags 0x41
[ 9.327590] type=1400 audit(1298622807.115:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=409 comm="apparmor_parser"
[ 9.329888] type=1400 audit(1298622807.119:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=409 comm="apparmor_parser"
[ 9.331016] type=1400 audit(1298622807.119:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=409 comm="apparmor_parser"
[ 9.691205] alloc irq_desc for 43 on node -1
[ 9.691219] alloc kstat_irqs on node -1
[ 9.691254] atl2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 9.691667] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.816872] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 9.817061] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.830809] eeepc_laptop: Get control methods supported: 0x101711
[ 9.864965] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6
[ 10.625392] intel_rng: FWH not detected
[ 11.048196] Linux agpgart interface v0.103
[ 11.369057] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 11.369510] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 11.547009] Linux video capture interface: v2.00
[ 11.552945] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 11.753679] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
[ 11.781800] input: UVC Camera (eb1a:2761) as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input7
[ 11.783375] usbcore: registered new interface driver uvcvideo
[ 11.783389] USB Video Class driver (v0.1.0)
[ 11.909547] cfg80211: Calling CRDA to update world regulatory domain
[ 12.119666] cfg80211: World regulatory domain updated:
[ 12.119680] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.119690] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.119700] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.119710] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.119719] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.119728] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.617560] [drm] Initialized drm 1.1.0 20060810
[ 12.820327] ath5k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.820352] ath5k 0000:01:00.0: setting latency timer to 64
[ 12.820448] ath5k 0000:01:00.0: registered as 'phy0'
[ 13.332094] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 13.439500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 13.544722] type=1400 audit(1298622811.335:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=767 comm="apparmor_parser"
[ 13.585270] type=1400 audit(1298622811.375:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=769 comm="apparmor_parser"
[ 13.587304] type=1400 audit(1298622811.375:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=769 comm="apparmor_parser"
[ 13.618928] type=1400 audit(1298622811.407:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=769 comm="apparmor_parser"
[ 13.664931] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.664950] i915 0000:00:02.0: setting latency timer to 64
[ 13.678658] type=1400 audit(1298622811.467:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=775 comm="apparmor_parser"
[ 13.744188] [drm] set up 7M of stolen space
[ 13.758576] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.759263] [drm] initialized overlay support
[ 14.126737] type=1400 audit(1298622811.915:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=775 comm="apparmor_parser"
[ 14.159569] type=1400 audit(1298622811.947:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=775 comm="apparmor_parser"
[ 14.372718] ath: EEPROM regdomain: 0x60
[ 14.372727] ath: EEPROM indicates we should expect a direct regpair map
[ 14.372739] ath: Country alpha2 being used: 00
[ 14.372745] ath: Regpair used: 0x60
[ 14.440173] phy0: Selected rate control algorithm 'minstrel'
[ 14.443216] Registered led device: ath5k-phy0::rx
[ 14.443502] Registered led device: ath5k-phy0::tx
[ 14.443515] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 14.540081] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.917943] Console: switching to colour frame buffer device 100x30
[ 14.923558] fb0: inteldrmfb frame buffer device
[ 14.923566] drm: registered panic notifier
[ 14.923576] Slow work thread pool: Starting up
[ 14.941634] Slow work thread pool: Ready
[ 14.941678] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.942174] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.942272] alloc irq_desc for 44 on node -1
[ 14.942279] alloc kstat_irqs on node -1
[ 14.942304] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 14.942372] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.568067] ppdev: user-space parallel port driver
[ 20.731318] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 30.046834] wlan0: authenticate with 00:1d:6a:9f:11:17 (try 1)
[ 30.048976] wlan0: authenticated
[ 30.049039] wlan0: associate with 00:1d:6a:9f:11:17 (try 1)
[ 30.056949] wlan0: RX AssocResp from 00:1d:6a:9f:11:17 (capab=0x421 status=0 aid=1)
[ 30.056962] wlan0: associated
[ 30.058328] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.237694] EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
[ 40.608040] wlan0: no IPv6 routers present
[ 46.786501] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
kevin@kevin-701:~$
pr cat/etc/fstab: kevin@kevin-701:~$ cat/etc/fstab
bash: cat/etc/fstab: Aucun fichier ou dossier de ce type
pour mount : kevin@kevin-701:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=600)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/kevin/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=kevin)
/dev/sdb1 on /media/Nouveau volume type ext2 (rw,nosuid,nodev,uhelper=udisks)
kevin@kevin-701:~$
voila merci de votre aide
[ 0.171654] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.171665] pci 0000:00:1c.0: PME# disabled
[ 0.171789] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.171800] pci 0000:00:1c.1: PME# disabled
[ 0.171919] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.171930] pci 0000:00:1c.2: PME# disabled
[ 0.172034] pci 0000:00:1d.0: reg 20: [io 0xe400-0xe41f]
[ 0.172121] pci 0000:00:1d.1: reg 20: [io 0xe480-0xe49f]
[ 0.172205] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f]
[ 0.172288] pci 0000:00:1d.3: reg 20: [io 0xe880-0xe89f]
[ 0.172501] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.172518] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.172529] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.172540] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff
[ 0.172598] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.172612] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.172626] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.172640] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.172654] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf]
[ 0.172699] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.172709] pci 0000:00:1f.2: PME# disabled
[ 0.172781] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.172897] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.172909] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.172921] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.172937] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.173066] pci 0000:03:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit]
[ 0.173117] pci 0000:03:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref]
[ 0.173176] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.173187] pci 0000:03:00.0: PME# disabled
[ 0.173221] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.173247] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.173258] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.173270] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.173284] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.173411] pci 0000:01:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit]
[ 0.173541] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.173563] pci 0000:00:1c.2: PCI bridge to [bus 01-02]
[ 0.173574] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.173586] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbefffff]
[ 0.173601] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.173710] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.173721] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.173734] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.173749] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.173759] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.173768] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.173778] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.173787] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff] (subtractive decode)
[ 0.173797] pci 0000:00:1e.0: bridge window [mem 0x1f810000-0xffffffff] (subtractive decode)
[ 0.173834] pci_bus 0000:00: on NUMA node 0
[ 0.173859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.174404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.174581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.174743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.190591] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.190966] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.191333] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.191695] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.192072] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.192441] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.192813] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.193180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.193344] HEST: Table is not found!
[ 0.193599] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.193631] vgaarb: loaded
[ 0.194185] SCSI subsystem initialized
[ 0.194370] libata version 3.00 loaded.
[ 0.194552] usbcore: registered new interface driver usbfs
[ 0.194595] usbcore: registered new interface driver hub
[ 0.194692] usbcore: registered new device driver usb
[ 0.195139] ACPI: WMI: Mapper loaded
[ 0.195147] PCI: Using ACPI for IRQ routing
[ 0.195221] PCI: pci_cache_line_size set to 64 bytes
[ 0.195365] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.195374] reserve RAM buffer: 000000001f780000 - 000000001fffffff
[ 0.195700] NetLabel: Initializing
[ 0.195708] NetLabel: domain hash size = 128
[ 0.195713] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.195752] NetLabel: unlabeled traffic allowed by default
[ 0.196208] hpet clockevent registered
[ 0.196220] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.196235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.196252] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.200068] Switching to clocksource tsc
[ 0.234021] AppArmor: AppArmor Filesystem Enabled
[ 0.234085] pnp: PnP ACPI init
[ 0.234148] ACPI: bus type pnp registered
[ 0.240340] pnp: PnP ACPI: found 13 devices
[ 0.240352] ACPI: ACPI bus type pnp unregistered
[ 0.240365] PnPBIOS: Disabled by ACPI PNP
[ 0.240409] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.240436] system 00:08: [io 0x0380-0x0383] has been reserved
[ 0.240446] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.240456] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.240466] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.240477] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.240487] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.240498] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.240515] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.240526] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.240543] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.240560] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.240578] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.240589] system 00:0c: [mem 0x000c0000-0x000d3fff] could not be reserved
[ 0.240599] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.240610] system 00:0c: [mem 0x00100000-0x1f7fffff] could not be reserved
[ 0.280102] pci 0000:00:1c.0: BAR 14: assigned [mem 0x1f900000-0x1fafffff]
[ 0.280119] pci 0000:00:1c.0: BAR 15: assigned [mem 0x1fb00000-0x1fcfffff 64bit pref]
[ 0.280132] pci 0000:00:1c.1: BAR 15: assigned [mem 0x1fd00000-0x1fefffff 64bit pref]
[ 0.280143] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.280153] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.280163] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.280172] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.280183] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.280196] pci 0000:00:1c.0: bridge window [mem 0x1f900000-0x1fafffff]
[ 0.280209] pci 0000:00:1c.0: bridge window [mem 0x1fb00000-0x1fcfffff 64bit pref]
[ 0.280224] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.280234] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.280247] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.280259] pci 0000:00:1c.1: bridge window [mem 0x1fd00000-0x1fefffff 64bit pref]
[ 0.280273] pci 0000:00:1c.2: PCI bridge to [bus 01-02]
[ 0.280283] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.280296] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbefffff]
[ 0.280308] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.280323] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.280329] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.280341] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.280351] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.280384] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.280402] alloc irq_desc for 16 on node -1
[ 0.280409] alloc kstat_irqs on node -1
[ 0.280429] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.280445] pci 0000:00:1c.0: setting latency timer to 64
[ 0.280465] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.280477] alloc irq_desc for 17 on node -1
[ 0.280483] alloc kstat_irqs on node -1
[ 0.280495] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.280506] pci 0000:00:1c.1: setting latency timer to 64
[ 0.280525] pci 0000:00:1c.2: enabling device (0106 -> 0107)
[ 0.280535] alloc irq_desc for 18 on node -1
[ 0.280541] alloc kstat_irqs on node -1
[ 0.280552] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.280562] pci 0000:00:1c.2: setting latency timer to 64
[ 0.280580] pci 0000:00:1e.0: setting latency timer to 64
[ 0.280593] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.280602] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.280610] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.280619] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000dffff]
[ 0.280628] pci_bus 0000:00: resource 8 [mem 0x1f810000-0xffffffff]
[ 0.280637] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.280645] pci_bus 0000:04: resource 1 [mem 0x1f900000-0x1fafffff]
[ 0.280655] pci_bus 0000:04: resource 2 [mem 0x1fb00000-0x1fcfffff 64bit pref]
[ 0.280664] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.280672] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.280682] pci_bus 0000:03: resource 2 [mem 0x1fd00000-0x1fefffff 64bit pref]
[ 0.280691] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.280699] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
[ 0.280708] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.280718] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.280726] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.280735] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.280743] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000dffff]
[ 0.280752] pci_bus 0000:05: resource 8 [mem 0x1f810000-0xffffffff]
[ 0.280871] NET: Registered protocol family 2
[ 0.281055] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.281664] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.281938] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.282209] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.282216] TCP reno registered
[ 0.282225] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.282248] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.282498] NET: Registered protocol family 1
[ 0.282547] pci 0000:00:02.0: Boot video device
[ 0.282691] PCI: CLS 16 bytes, default 64
[ 0.283179] cpufreq-nforce2: No nForce2 chipset.
[ 0.283272] Scanning for low memory corruption every 60 seconds
[ 0.283651] audit: initializing netlink socket (disabled)
[ 0.283685] type=2000 audit(1298622797.276:1): initialized
[ 0.320201] Trying to unpack rootfs image as initramfs...
[ 0.365193] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.370309] VFS: Disk quotas dquot_6.5.2
[ 0.370527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.372650] fuse init (API version 7.14)
[ 0.372981] msgmni has been set to 954
[ 0.383503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.383518] io scheduler noop registered
[ 0.383525] io scheduler deadline registered
[ 0.383582] io scheduler cfq registered (default)
[ 0.383953] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.384021] alloc irq_desc for 40 on node -1
[ 0.384028] alloc kstat_irqs on node -1
[ 0.384054] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.384285] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.384345] alloc irq_desc for 41 on node -1
[ 0.384351] alloc kstat_irqs on node -1
[ 0.384367] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.384571] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.384627] alloc irq_desc for 42 on node -1
[ 0.384634] alloc kstat_irqs on node -1
[ 0.384649] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.384922] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.385245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.385917] ACPI: AC Adapter [AC0] (off-line)
[ 0.386217] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.390694] ACPI: Lid Switch [LID]
[ 0.390921] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.390941] ACPI: Sleep Button [SLPB]
[ 0.391095] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.391109] ACPI: Power Button [PWRB]
[ 0.391263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.391276] ACPI: Power Button [PWRF]
[ 0.392114] ACPI: acpi_idle registered with cpuidle
[ 0.392231] Marking TSC unstable due to TSC halts in idle
[ 0.401355] Switching to clocksource hpet
[ 0.413912] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.413949] ACPI: Thermal Zone [TZ00] (35 C)
[ 0.414210] ERST: Table is not found!
[ 0.414697] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.419865] brd: module loaded
[ 0.427484] loop: module loaded
[ 0.428149] isapnp: Scanning for PnP cards...
[ 0.436443] ata_piix 0000:00:1f.2: version 2.13
[ 0.436490] alloc irq_desc for 19 on node -1
[ 0.436497] alloc kstat_irqs on node -1
[ 0.436517] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.436531] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.436640] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.448844] scsi0 : ata_piix
[ 0.492776] scsi1 : ata_piix
[ 0.510966] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.510982] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.518441] Fixed MDIO Bus: probed
[ 0.518573] PPP generic driver version 2.4.2
[ 0.518788] tun: Universal TUN/TAP device driver, 1.6
[ 0.518795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.519143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.519230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.519273] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.519397] alloc irq_desc for 23 on node -1
[ 0.519404] alloc kstat_irqs on node -1
[ 0.519425] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.519449] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.519461] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.519584] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.519669] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 0.520550] hub 1-0:1.0: USB hub found
[ 0.520569] hub 1-0:1.0: 2 ports detected
[ 0.520764] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.520783] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.520793] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.520935] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.521010] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 0.524231] hub 2-0:1.0: USB hub found
[ 0.524249] hub 2-0:1.0: 2 ports detected
[ 0.524422] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.524440] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.524450] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.524591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.524669] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 0.525057] hub 3-0:1.0: USB hub found
[ 0.525091] hub 3-0:1.0: 2 ports detected
[ 0.525254] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.525274] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.525284] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.525408] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.525476] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 0.525887] hub 4-0:1.0: USB hub found
[ 0.525903] hub 4-0:1.0: 2 ports detected
[ 0.526297] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.603805] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.652079] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.652556] mice: PS/2 mouse device common for all mice
[ 0.653192] rtc_cmos 00:03: RTC can wake from S4
[ 0.653329] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.653383] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.653784] device-mapper: uevent: version 1.0.3
[ 0.656855] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.670546] device-mapper: multipath: version 1.1.1 loaded
[ 0.670560] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.671108] EISA: Probing bus 0 at eisa.0
[ 0.671117] EISA: Cannot allocate resource for mainboard
[ 0.671126] Cannot allocate resource for EISA slot 1
[ 0.671133] Cannot allocate resource for EISA slot 2
[ 0.671140] Cannot allocate resource for EISA slot 3
[ 0.671147] Cannot allocate resource for EISA slot 4
[ 0.671154] Cannot allocate resource for EISA slot 5
[ 0.671161] Cannot allocate resource for EISA slot 6
[ 0.671168] Cannot allocate resource for EISA slot 7
[ 0.671174] Cannot allocate resource for EISA slot 8
[ 0.671181] EISA: Detected 0 cards.
[ 0.690361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.692435] ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66
[ 0.692446] ata2.00: 7815024 sectors, multi 0: LBA
[ 0.696192] cpuidle: using governor ladder
[ 0.696375] cpuidle: using governor menu
[ 0.697314] TCP cubic registered
[ 0.697830] NET: Registered protocol family 10
[ 0.703969] lo: Disabled Privacy Extensions
[ 0.704662] NET: Registered protocol family 17
[ 0.704823] Using IPI No-Shortcut mode
[ 0.705136] PM: Resume from disk failed.
[ 0.705169] registered taskstats version 1
[ 0.705648] Magic number: 15:728:574
[ 0.705850] rtc_cmos 00:03: setting system clock to 2011-02-25 08:33:18 UTC (1298622798)
[ 0.705860] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.705867] EDD information not available.
[ 0.709299] ata2.00: configured for UDMA/66
[ 0.860702] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 1.248083] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1.460403] isapnp: No Plug & Play device found
[ 1.460847] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
[ 1.461419] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.461720] sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 1.461883] sd 1:0:0:0: [sda] Write Protect is off
[ 1.461893] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.461965] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.462425] sda: sda1 sda2 < sda5 >
[ 1.464570] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.498986] ACPI: Battery Slot [BAT0] (battery present)
[ 1.584332] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2.106981] Freeing initrd memory: 10564k freed
[ 2.125947] Freeing unused kernel memory: 684k freed
[ 2.127490] Write protecting the kernel text: 4932k
[ 2.127612] Write protecting the kernel read-only data: 1976k
[ 2.183485] udev[69]: starting version 163
[ 2.945363] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 2.945373] Copyright (c) 2007 Atheros Corporation.
[ 2.945459] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.945483] atl2 0000:03:00.0: setting latency timer to 64
[ 3.072839] Initializing USB Mass Storage driver...
[ 3.073154] scsi2 : usb-storage 1-2:1.0
[ 3.074821] scsi3 : usb-storage 3-1:1.0
[ 3.079201] usbcore: registered new interface driver usb-storage
[ 3.079211] USB Mass Storage support registered.
[ 3.085154] Btrfs loaded
[ 3.145492] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.080871] scsi 2:0:0:0: Direct-Access Toshiba StorE HDD 0000 PQ: 0 ANSI: 4
[ 4.083327] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.087502] scsi 3:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 4.089048] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4.089242] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.093830] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.093843] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 4.093851] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.098855] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 4.104109] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.104133] sdb: sdb1
[ 5.907888] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.907902] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 8.246612] Adding 226300k swap on /dev/sda5. Priority:-1 extents:1 across:226300k
[ 8.368064] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.604320] udev[334]: starting version 163
[ 8.891746] lp: driver loaded but no devices found
[ 9.246161] eeepc_laptop: Eee PC Hotkey Driver
[ 9.246177] eeepc_laptop: model 701 does not officially support setting cpu speed
[ 9.246185] eeepc_laptop: cpufv disabled to avoid instability
[ 9.246208] eeepc_laptop: Hotkey init flags 0x41
[ 9.327590] type=1400 audit(1298622807.115:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=409 comm="apparmor_parser"
[ 9.329888] type=1400 audit(1298622807.119:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=409 comm="apparmor_parser"
[ 9.331016] type=1400 audit(1298622807.119:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=409 comm="apparmor_parser"
[ 9.691205] alloc irq_desc for 43 on node -1
[ 9.691219] alloc kstat_irqs on node -1
[ 9.691254] atl2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 9.691667] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.816872] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 9.817061] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.830809] eeepc_laptop: Get control methods supported: 0x101711
[ 9.864965] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6
[ 10.625392] intel_rng: FWH not detected
[ 11.048196] Linux agpgart interface v0.103
[ 11.369057] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 11.369510] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 11.547009] Linux video capture interface: v2.00
[ 11.552945] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 11.753679] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
[ 11.781800] input: UVC Camera (eb1a:2761) as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input7
[ 11.783375] usbcore: registered new interface driver uvcvideo
[ 11.783389] USB Video Class driver (v0.1.0)
[ 11.909547] cfg80211: Calling CRDA to update world regulatory domain
[ 12.119666] cfg80211: World regulatory domain updated:
[ 12.119680] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.119690] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.119700] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.119710] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.119719] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.119728] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.617560] [drm] Initialized drm 1.1.0 20060810
[ 12.820327] ath5k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.820352] ath5k 0000:01:00.0: setting latency timer to 64
[ 12.820448] ath5k 0000:01:00.0: registered as 'phy0'
[ 13.332094] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 13.439500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 13.544722] type=1400 audit(1298622811.335:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=767 comm="apparmor_parser"
[ 13.585270] type=1400 audit(1298622811.375:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=769 comm="apparmor_parser"
[ 13.587304] type=1400 audit(1298622811.375:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=769 comm="apparmor_parser"
[ 13.618928] type=1400 audit(1298622811.407:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=769 comm="apparmor_parser"
[ 13.664931] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.664950] i915 0000:00:02.0: setting latency timer to 64
[ 13.678658] type=1400 audit(1298622811.467:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=775 comm="apparmor_parser"
[ 13.744188] [drm] set up 7M of stolen space
[ 13.758576] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.759263] [drm] initialized overlay support
[ 14.126737] type=1400 audit(1298622811.915:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=775 comm="apparmor_parser"
[ 14.159569] type=1400 audit(1298622811.947:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=775 comm="apparmor_parser"
[ 14.372718] ath: EEPROM regdomain: 0x60
[ 14.372727] ath: EEPROM indicates we should expect a direct regpair map
[ 14.372739] ath: Country alpha2 being used: 00
[ 14.372745] ath: Regpair used: 0x60
[ 14.440173] phy0: Selected rate control algorithm 'minstrel'
[ 14.443216] Registered led device: ath5k-phy0::rx
[ 14.443502] Registered led device: ath5k-phy0::tx
[ 14.443515] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 14.540081] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.917943] Console: switching to colour frame buffer device 100x30
[ 14.923558] fb0: inteldrmfb frame buffer device
[ 14.923566] drm: registered panic notifier
[ 14.923576] Slow work thread pool: Starting up
[ 14.941634] Slow work thread pool: Ready
[ 14.941678] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.942174] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.942272] alloc irq_desc for 44 on node -1
[ 14.942279] alloc kstat_irqs on node -1
[ 14.942304] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 14.942372] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.568067] ppdev: user-space parallel port driver
[ 20.731318] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 30.046834] wlan0: authenticate with 00:1d:6a:9f:11:17 (try 1)
[ 30.048976] wlan0: authenticated
[ 30.049039] wlan0: associate with 00:1d:6a:9f:11:17 (try 1)
[ 30.056949] wlan0: RX AssocResp from 00:1d:6a:9f:11:17 (capab=0x421 status=0 aid=1)
[ 30.056962] wlan0: associated
[ 30.058328] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.237694] EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
[ 40.608040] wlan0: no IPv6 routers present
[ 46.786501] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
kevin@kevin-701:~$
pr cat/etc/fstab: kevin@kevin-701:~$ cat/etc/fstab
bash: cat/etc/fstab: Aucun fichier ou dossier de ce type
pour mount : kevin@kevin-701:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=600)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/kevin/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=kevin)
/dev/sdb1 on /media/Nouveau volume type ext2 (rw,nosuid,nodev,uhelper=udisks)
kevin@kevin-701:~$
voila merci de votre aide
Bnjour pr l'ext 2 c'est moi qui l'ai formater ainsi. Mais je le reformate en ext 4 pour que vous soyez sur(e). merci de votre aide. je vous tiendrais au courant.
re-bonjour, j'ai formaté mon disque dur externe sous ext 4. Je vais sur le site de téléchargement. J'enregistre la cible du lien sous mon disque dur externe. Puis, je change les propriétés du fichier dofusinstall.run pour qu'il se lance comme un programme. Je double clique sur le fichier et selectionne lancer. J'accepte le contrat. Puis on me demande : "Voulez-vous installer le jeu dans le répertoire /home/kevin/ankama/Dofus ? je clique sur NON et selectionne le disque dur externe.Et la, on me dit que: "/media/Nouveau volume/Dofus : Le répertoire n'est pas accessible en écriture. Veuillez spécifier un autre répertoire ou contacter votre administrateur." merci, en attente de votre réponse.
mamiemando
Messages postés
33378
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
25 novembre 2024
7 802
27 févr. 2011 à 15:23
27 févr. 2011 à 15:23
Laisse tomber en ext2 ça ira aussi et normalement il n'y a pas besoin de reformater, dans ce cas précis. Ajoute la ligne que je t'ai indiqué dans mon précédant message dans /etc/fstab (en changeant ext2 par ext4 au besoin).
Bonne chance
Bonne chance
bonsoir apré avoir écrit la phrase comme vous me lavais dit, j'obtiens cela: Error mounting: mount exited with exit code 1: helper failed with:
mount: mount point /media/Nouveau does not exist =$=$=$ merci et bnne soirée
mount: mount point /media/Nouveau does not exist =$=$=$ merci et bnne soirée
mamiemando
Messages postés
33378
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
25 novembre 2024
7 802
28 févr. 2011 à 09:39
28 févr. 2011 à 09:39
Mmmmh bizarre tu avais écrit :
/dev/sdb1 on /media/Nouveau volume type ext2 (rw,nosuid,nodev,uhelper=udisks)
Bon, c'est pas grave on va le créer :
Si tu préfères tu peux également créer un répertoire avec un nom plus parlant genre /media/externe et corriger en conséquence /etc/fstab et la commande mkdir ci-dessus.
Bonne chance
/dev/sdb1 on /media/Nouveau volume type ext2 (rw,nosuid,nodev,uhelper=udisks)
Bon, c'est pas grave on va le créer :
sudo mkdir -p /media/Nouveau
Si tu préfères tu peux également créer un répertoire avec un nom plus parlant genre /media/externe et corriger en conséquence /etc/fstab et la commande mkdir ci-dessus.
Bonne chance
24 févr. 2011 à 11:25