Boot error under seven 0xc000000e
Solved
Profile blocked
-
erkael Posted messages 166 Status Member -
erkael Posted messages 166 Status Member -
Hello,
I have an Acer Aspire D250 notebook running Windows 7 Starter, and since today, upon startup, it shows me:
Windows failed to start. A recent software change might be the cause of this issue. To fix the problem:
1. Insert the Windows installation disc and restart the computer.
2. Choose your language settings and click "Next".
3. Click "Repair your computer".
If you do not have this disc, contact your system administrator or the manufacturer of your computer for assistance.
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Of course, my notebook does not have a CD drive, and I do not have the disc either.
I can't boot into safe mode (I press F8 on startup or F11 and nothing happens)
I managed to bring up the window "choose an operating system or press tab to choose a tool."
I press F8 to display advanced options, but it takes me back to the startup error page.
Thank you for helping me as soon as possible, because tomorrow around noon, I'm leaving for two days.
Configuration: Windows XP / Internet Explorer 8.0
Signature non conforme supprimée par la Modération CCM
I have an Acer Aspire D250 notebook running Windows 7 Starter, and since today, upon startup, it shows me:
Windows failed to start. A recent software change might be the cause of this issue. To fix the problem:
1. Insert the Windows installation disc and restart the computer.
2. Choose your language settings and click "Next".
3. Click "Repair your computer".
If you do not have this disc, contact your system administrator or the manufacturer of your computer for assistance.
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Of course, my notebook does not have a CD drive, and I do not have the disc either.
I can't boot into safe mode (I press F8 on startup or F11 and nothing happens)
I managed to bring up the window "choose an operating system or press tab to choose a tool."
I press F8 to display advanced options, but it takes me back to the startup error page.
Thank you for helping me as soon as possible, because tomorrow around noon, I'm leaving for two days.
Configuration: Windows XP / Internet Explorer 8.0
Signature non conforme supprimée par la Modération CCM
19 answers
PROBLEM SOLVED !!!!
For those who might be in the same situation as I was, here is the solution!
1) Go here and download the Windows 7 Recovery Disc according to your version (32 or 64 Bits) https://neosmart.net/blog/2009/windows-7-system-repair-discs/
2) Install BitTorrent and do its updates.
3) In BitTorrent, click on add a torrent (gray square with a white T inside and a green + next to it) and add the torrent you downloaded earlier.
4) Once the download is finished, take a burning software (I used "Roxio Creator Basic v9") and burn it.
5) For notebooks, put the hard drive into a desktop to have a CD drive or connect an external drive.
6) Turn on the computer, and at startup, press F12 to choose to boot from the CD drive.
7) Once loading is finished, follow the on-screen instructions, and restart when prompted.
8) There you go, your computer is repaired! It's normal that you can't access it from your desktop due to drivers, etc., so turn off your desktop, unplug your hard drive, and put it back on your notebook.
It may be slow to start, as it reconfigures its settings.
For me, it was an update that went wrong, as at startup, it re-did the update, which went well this time.
Note: I was also infected with a very dangerous classified trojan.
A little thank you would be nice to those I may have helped.
Signature not compliant removed by the CCM Moderation!
For those who might be in the same situation as I was, here is the solution!
1) Go here and download the Windows 7 Recovery Disc according to your version (32 or 64 Bits) https://neosmart.net/blog/2009/windows-7-system-repair-discs/
2) Install BitTorrent and do its updates.
3) In BitTorrent, click on add a torrent (gray square with a white T inside and a green + next to it) and add the torrent you downloaded earlier.
4) Once the download is finished, take a burning software (I used "Roxio Creator Basic v9") and burn it.
5) For notebooks, put the hard drive into a desktop to have a CD drive or connect an external drive.
6) Turn on the computer, and at startup, press F12 to choose to boot from the CD drive.
7) Once loading is finished, follow the on-screen instructions, and restart when prompted.
8) There you go, your computer is repaired! It's normal that you can't access it from your desktop due to drivers, etc., so turn off your desktop, unplug your hard drive, and put it back on your notebook.
It may be slow to start, as it reconfigures its settings.
For me, it was an update that went wrong, as at startup, it re-did the update, which went well this time.
Note: I was also infected with a very dangerous classified trojan.
A little thank you would be nice to those I may have helped.
Signature not compliant removed by the CCM Moderation!
Angel
Great. It's nice to meet someone who shares their know-how, despite the selfishness of modern "society". Best regards.
max24330
Thank you very much for your solution.