SCART to VGA Diagram? Solved

Question

Hello  I want to create a wiring SCART->VGA to connect the VGA input of my CRT screen to the SCART output of the FreeBox (or game console, or VHS player, or DVD...)  So I want to assemble a cable SCART on one side (to connect to the SCART output) and female VGA on the other to connect the screen (so for acquisition)  I am looking for a wiring schematic, if anyone has a clue, thanks in advance... ;)   A RCA>VGA or S-Video>VGA setup could also work (I can find an adapter afterward...)  PS: I found the reverse setup: VGA>SCART, but that doesn't work, of course...

Yomapoitiers · Accepted Answer

Hello,

It's pretty normal that it's not working and your screen stays black because the sync isn't being sent!
Even if you send the RGB, without sync, your LCD or CRT screen doesn't know what to do...
I just tested with a cable designed for a VIDEO PROJECTOR. My screen still stays black...
It even says "no signal" even though the RGB is coming through the wires!

So we need to find a way to send those sync signals, either by creating them (box for 70 euros) or by adding them to the DB15, which I can't do since it's molded!*

brbc64 · Answer

Je voudrais savoir au moins si les branchements Péritel sont les mêmes pour utiliser le câble en entrée et en sortie...

O_o_Sheumeuhneuh · Answer

Hello,

As far as I remember, the VGA connector has sync pins for the screen, which are not available on the Scart pins.

Without sync, the screen will not work.

I am not sure you can make this connection.

See you

--
In mechanics, there is the hammer and the chisel.
For Winchoze, there is format c: /y.

brbc64 · Answer

Well, isn't there a default display mode without sync? I hope I can still use this screen...

sk8ter · Answer

Hello,

It is not just a simple binding adaptation, but a signal conversion. For your information, it is possible to find a small box (with a remote control) that fulfills this function for about €70 at Surcouf.

franck · Answer

Hi,

Given the date of your message, I think you have received your answer. There are
adapter peripherals to VGA for about 30 euros.
I also plan to make this type of connection from my Freebox to
my PC.
Are you satisfied? Do you have any advice to give me?

Thank you

chupajab · Answer

Hello, I'm also interested. I found cables of this type for much cheaper, but I have a problem: what about the sound? How do we do that? Because on the Freebox, the sound comes out via the Peritel, and there’s no auxiliary jack, and the VGA doesn’t carry sound, and anyway, my screen doesn't have speakers. So what do we do? ^^ I have a 17-inch flat screen that’s useless to me, and I don't want to shell out 200 euros for a TV. ^^

Maxime · Answer

I am going to connect my satellite receiver to my LCD screen, so SCART to VGA. It's relatively simple with an LM1881 integrated circuit that provides both sync signals (vertical + horizontal) and the cost is modest.

I will keep you updated.

saccappus · Answer

Hello,
I just bought a SCART to VGA cable to connect my Numericable box to a Samsung 226B screen...
The problem is that it doesn't work... I made sure with the Numericable technical service that the SCART output of the TV decoder was indeed RGB... I have no image... the screen remains black!!

If anyone can advise me, I don't know if it's a synchronization issue or not!!

fitz · Answer

Good evening,  I am also looking for a way to connect a Freebox v4 to a 24" LCD screen equipped with an HDMI and VGA output... if anyone knows a trick, I'm all ears!  ++  RFitz

yannou63 · Answer

Hello,
Following the progression of high definition, since I'm still using non-HD devices, I would like to connect these devices to a flat screen or a CRT PC screen via the VGA port.

Specifically for game consoles like NES, SNES, Mega Drive, etc.

I want to keep the Scart connector intact, so no composite output; I want RGB.

So if someone had a link to an RGB to VGA device, that would be great.

It would also need to have audio outputs wired to send to a hi-fi system or something similar.

Otherwise, I know there are monitors with a Scart input directly, but I haven't been able to find any.

If you have any links, I’m interested.
Thanks!

fred · Answer

To connect my Freebox to my screen, I set up the following:

Freebox > Peritel/RCA adapter > PC Input TV Card + Kastor TV (freeware)

So the image is limited by the Composite connection, but in my opinion, the quality of Freebox TV is average anyway... The result is OK.

HUBy · Answer

Where did you find your cable??

Vinc · Answer

Hello HUBy,

I just found a PERITEL / VGA cable (PERITEL OUT / VGA IN) on eBay: http://cgi.ebay.fr/CABLE-PERITEL-OUT-SORTIE-VGA-IN-ENTREE-2-m_W0QQitemZ180214036670QQihZ008QQcategoryZ93375QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
If the sale is over, check the store, he has more...

charlotte · Answer

Does anyone have this cable? Does it mean we can get the image output from a console to the computer screen?

poilu · Answer

Hello guys,

I’m also looking for this type of gear. I’d like to connect my DVD player to an old 19-inch TFT screen equipped with a DVI-D port and a HD-15 (VGA) port.
I’m struggling just as much as you are.
I doubt that this cable sold on eBay will work, but I could be wrong. I’m interested in feedback on this cable.
I also have a digital out optical and a digital out coaxial.
I don’t know anything about these standards. If anyone can guide me?

Big thanks in advance.
Poilu

moi · Answer

Je suis désolé, mais je ne peux pas aider avec cela.

Camille · Answer

Hi there!
I have a problem :s

I don't have a motherboard in my PC anymore and I want to connect my computer to my TV..
I have an RCA but I don't see how to connect it to my PC, even with a SCART adapter I'm not sure about it...

Camille · Answer

It's not a motherboard, it's a sound card; I made a mistake.

yomapoitiers · Answer

What exactly do you want to connect? Do you want to watch your PC video on your TV?

guille · Answer

Hello,  I too wanted to connect my DVD player via SCART to a flat screen using VGA.  So I bought the cable on eBay as you previously mentioned "SCART OUT to VGA IN." But it doesn't work, the screen stays black.

yomapoitiers · Answer

No no no! Scart -> VGA won't work, because the VGA sync signals are not transmitted by the digital terrestrial television decoder! Only projectors can receive the signals from the TNT with such a cable because they have their own internal sync. You either need to synchronize with a small electronic setup or consider an HDMI -> VGA cable and buy a TNT demodulator equipped with an HDMI output; these are available now and not too expensive, and they allow you to receive TNT in HD! Be careful, I'm not sure that the HDMI to VGA will work... I know that HDMI can be converted to DVI, and DVI to VGA, but I'm not sure if the sync is there! Needs testing...

Lown in · Answer

Hi

Already on Ebay.fr, for not too much £ § $

here -> http://cgi.ebay.fr/CABLE-PERITEL-OUT-SORTIE-VGA-SVGA-IN-ENTREE-2-m_W0QQitemZ110250416238QQcmdZViewItem?hash=item110250416238&_trkparms=72%3A606%7C39%3A1%7C65%3A12&_trksid=p3911.c0.m14

here -> http://cgi.ebay.fr/CABLE-PERITEL-OUT-SORTIE-VGA-SVGA-IN-ENTREE-2-m_W0QQitemZ110250416238QQcmdZViewItem?hash=item110250416238&_trkparms=72%3A606%7C39%3A1%7C65%3A12&_trksid=p3911.c0.m14

For VGA/RCA, just for an idea

here -> http://www.connectic.fr/index.php?action=rechercher&mots=C%E2ble+VGA+-+RCA

here -> http://cgi.ebay.fr/Cable-convertisseur-VGA-male-a-TV-femelle-adaptateur_W0QQitemZ110250721650QQcmdZViewItem

Good luck to you!

Lown in

babouk91 · Answer

I'm sorry, I still haven't found an answer to my question, so to yours as well. However, it seems that there are kits available at conrad.fr and pearl.fr...

yomapoitiers · Answer

Hi everyone  I just tested the following setup: DVD player with HDMI output, HDMI -> DVI adapter, DVI -> VGA adapter, VGA monitor. It doesn't work for me, even with the lowest HDMI resolution. The monitor doesn't say "Cable not connected," but it doesn't display anything either.  It might work with other configurations, to be seen.

gloop · Answer

Here is my email if you are still interested in the scheme. omari.hassane@gmail.com

Vince44 · Answer

Hello everyone,  I also unfortunately made a purchase of a female VGA adapter, Peritel https://www.amazon.fr/Hama-Adaptateur-souple-p%C3%A9ritel-broches/dp/B001CSRDUE/ref=sr_1_1?ie=UTF8&s=electronics&qid=1227210218&sr=1-1  Then a 10-meter extension in male VGA (because I have a female VGA output).  So it fits well. (My TV is a CRT.)  Except that when I set everything up correctly, nothing works, in fact nothing displays, I tried with several TVs. Nothing either! I would need some tips and help please! Thank you

auclairdelune · Answer

There is an adapter on the market that works very well at a price of around 40 euros: http://www.rueducommerce.fr/Photo-Video-Numerique/Acquisition/Boitier-Externe/TECHGEAR/414315-One-Touch-Video-EZ-Grabber-TECHGEAR-capture-video.htm I tested it with XP (had some difficulties due to my graphics card not being properly configured) and with Vista, it works great and I use it to view my surveillance cameras while using the internet I really don't regret my purchase.

vestal741 · Answer

For 50 euros, there is a device that transforms the Vega signal into peritel or peritel Vega. It is the only way to connect a computer screen to a Livebox or a DVD player. The cable is only for retro use and it will be on sale Tuesday. I will get this device and let you know.

papy16 · Answer

Good evening, just to move things along :lol: I want to point out that in principle when using the RGB from the SCART: pins 7-11-15 we add the fast switching pin 16 and it seems to me that the sync signals are taken from the composite video output pin 19; the sound comes out through pins 1 and 3 and the ground is on pin 4; it doesn't seem necessary to use pin 8 for slow switching which only serves to send 12v to the receiving SCART to switch it. The audio output from the SCART needs an amplifier to drive a speaker. (a simple amplifier costing 6 to 10€ is sufficient) Have a good evening. --  a beginning of knowledge only gives a glimpse of its ignorance.

lolo · Answer

Papy16 l'a terminé...

papy16 · Answer

???? https://forums.commentcamarche.net/forum/affich-78735-cable-vga-peritel --  a beginning of knowledge only gives a glimpse of one's ignorance

Patrick · Answer

Good evening everyone,  I have a little information regarding the connections of a Freebox to a computer screen for those whose screen is equipped with an HDMI input: buy an HDMI cable, connect one end directly to the Freebox while taking the sound elsewhere via the original SCART cable, then the other end directly to the screen. This should result in a male-to-male HDMI cable, to be confirmed.  To connect a Freebox to a computer screen using VGA cables, there is a site that sells a manual VGA switch with a VGA output, which allows you to connect an HDMI-VGA cable, available at Surcouf, with the VGA side going to the switch and the monitor cable connected to the switch, all with an output cable going to the screen. Once the setup is complete, select the port corresponding to either the Freebox or the computer, all for a modest price of about 50 euros for the switch box, the sound cables, the HDMI/VGA cable, and a male-to-male VGA/VGA cable.  I ordered this setup, and I hope the box works well.  Here is the address of this very good site for connectivity, and it's really cheap: https://www.indipc.fr/index.fr.php

nassimkob · Answer

Hello, I just came across this product. http://cgi.ebay.fr/VIDEO-S-VIDEO-AV-TV-To-PC-Laptop-VGA-Converter-Box-398_W0QQitemZ250588100878QQcmdZViewItemQQptZFR_LC_Informatique_Connectiques?hash=item3a5836f90e a small price of around 20 euros... It's interesting. Experts!!! Does this ring a bell for you?  Thank you

olivier · Answer

Hello, sorry I don't have an answer for your setup that I'm interested in because I'm actually looking to connect a decoder to a PC screen. But I found a VGA/RCA cable on "Amazon" that cost me €12.90 all in. Hoping this can help you. Cheers and good luck.

vetcho · Answer

I lost the images from my Samsung DVD but I’m still waiting for the sound.  What should I do?

stephane13250 · Answer

Bonjour, je voudrais savoir si tu pourrais me montrer le schéma VGA->péritel ça m'aiderait beaucoup merci.

chookl · Answer

I have the same problem connecting the Freebox RGB output in analog to a flat-screen computer monitor that only has a VGA input without needing a TV or computer In principle, the Freebox should be configured for RGB output and not video The R G B outputs should be on the male scart connector that is connected to a female scart with a female scart to male VGA cable In addition to the R G B signals, horizontal sync is also needed  I will try this solution without any guarantee of success because the encoding of the R G B signals may be different between TV and computer charles.lataille@free.fr

SCART to VGA Diagram?

38 answers

Anomalies in my laptop usage: virus?

Help: assign a number to a word in another cell

Aol password loss and change of pc

Very small left scrollbar

Training of the receiving coil

Doctolib plans to use your health data for its ai research

Missing lock icon

Caching / buffering issue on m3u stream with emby

Unable to open xsl and xslx files

No network inside the house.