Notice shows WR30 M

Solved
cloclo54 -  
 Lepasssantquipasse -

Hello,
Could someone tell me how to use my WR 30 M watch which has 4 buttons: Light, Mode, Reset, and Start?
My son set it to the correct time for me, but I would like to have instructions on how to do it myself (setting the time, alarm, and stopwatch)
I'm not 20 anymore, and I need "clear" explanations!
Thank you to anyone who would be willing to help!
Best regards!

20 answers

  1. Pascal59000 Posted messages 2 Registration date   Status Member Last intervention   515
     
    • Press the "mode" button once = access to the timer (To start or stop the timer, press "start", to reset it, press "reset")
    • Press the "mode" button a second time = alarm setting
    • Set the alarm time by pressing "start" and move to setting the minutes by pressing "reset"
    • Press the "mode" button a third time = hour setting
    • The seconds are blinking, pressing "reset" will set them to zero
    • Press "reset" to set the minutes and use the "start" button to adjust them.
    • Press "reset" to set the hour and adjust with the "start" button
    • Press the "reset" button to set the day using the "start" button.
    • Press the "reset" button to set the month using the "start" button.
    • Press the "mode" button = end of settings


    There is a 12H/24H display mode
    To switch from one display mode to another, simply scroll through the hours during the setting; you will see that if, for example, you are in 12H mode at 1:00 AM and continue scrolling through the hours, you will go (among others) to 1:00 PM and then to the 24H display after 00:00.

    Have fun!

    Best regards
    1447
    1. SYLVIE
       
      Hello,
      I wanted to thank Pascal59000 for these very clear explanations that allowed me to set my son's watch;
      Best regards
      Sylvie
      20
    2. duarig
       
      Thank you Pascal59000 for this valuable and simple user manual. To fully operate the alarm, you need to press RST and ST/STP at the same time until the "alarm" logo appears or disappears on the LCD screen.
      44