Ecrans Bleus sous Windows 7 32bits

spikeur Messages postés 59 Statut Membre -  
spikeur Messages postés 59 Statut Membre -
Bonjour,

Depuis ce matin j'ai le droit à des écrans bleus, je ne sais pas d'où ça peut venir.
Les 2 premiers écrans bleus que j'ai eu ont eu lieu quand je regardais des photos sur mon ordinateur. Les autres fois un peu soudainement.

J'ai fait un MemTest, mais c'était long.... au bout d'1h15 j'ai arrêté, mais j'avais genre 60 erreurs.... je sais pas trop si ça peut être ça ? ma config est récente, genre même pas 2 semaines.

Sinon j'ai fait une analyse avec "WhoCrashed" voici le rapport :

Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Tue 04/05/2010 08:47:16 your computer crashed
This was likely caused by the following module: ntkrnlpa.exe
Bugcheck code: 0x50 (0x8220C798, 0x0, 0x82E2DAF4, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Dump file: C:\Windows\Minidump\050410-12870-01.dmp
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.

On Tue 04/05/2010 08:44:19 your computer crashed
This was likely caused by the following module: fltmgr.sys
Bugcheck code: 0x1000007E (0xC0000005, 0x54454D48, 0x8B27FA0C, 0x8B27F5F0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\050410-12776-01.dmp
file path: C:\Windows\system32\drivers\fltmgr.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Gestionnaire de filtres de système de fichiers Microsoft
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.

On Tue 04/05/2010 07:58:45 your computer crashed
This was likely caused by the following module: ntkrnlpa.exe
Bugcheck code: 0xA (0x4DC, 0x2, 0x0, 0x82C375A5)
Error: IRQL_NOT_LESS_OR_EQUAL
Dump file: C:\Windows\Minidump\050410-12417-01.dmp
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.

On Tue 04/05/2010 07:42:53 your computer crashed
This was likely caused by the following module: ntkrnlpa.exe
Bugcheck code: 0xA (0x1D, 0x2, 0x0, 0x82C3D5A5)
Error: IRQL_NOT_LESS_OR_EQUAL
Dump file: C:\Windows\Minidump\050410-13072-01.dmp
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.

A voir également:

4 réponses

ekim55 Messages postés 86933 Date d'inscription   Statut Modérateur Dernière intervention   14 615
 
Bonjour,
Redémarre en tapotant F8, clique sur dernière bonne configuration connue et vois que ca donne.
0
athena223 Messages postés 14406 Date d'inscription   Statut Contributeur Dernière intervention   2 781
 
Bonjour ,

Pour le premier type d'erreur ( ceux de 7h ... ) , je l'ai rencontré il y a peu de temps . C'était juste un peu de jeux dans la connexion du disque dur .
Mais il peu etre aussi lié a une barrette de ram mal fixé elle aussi .

Les 2 autre doivent etre du meme genre , car finalement c'est juste que les " fichier " on pas pu etre ouvert , donc retour sur un problème de connexion .
0
ekim55 Messages postés 86933 Date d'inscription   Statut Modérateur Dernière intervention   14 615
 
Ca pourrait être un problème de pilotes, va sur le site du constructeur et vérifie qu'ils soient à jour.
0
spikeur Messages postés 59 Statut Membre 13
 
Salut, merci pour vos réponses.
ça me semble bizarre car les cables SATA ont un genre de clips.

Les pilotes aussi car j'ai installé cet OS il y a quelques jours, avec les derniers pilotes téléchargés sur les sites des constructeurs.
0