Pb plantage serveur Linux

Bonjour,
si tu n'en dit pas plus on ne sera pas trop avancé ...

Salut,

Il s'agit d'une distrib Linux avec apache, Mysql, Php.
Oui mais encore ?

A vrai dire, ya pas grand chose de plus à ajouter.

C'est une debian, il ya vraiment pas grand chose d'installer dessus :
- Apache
- Mysql
- php
- phpmyadmin
- connection ssh
- connection ftp

Et je crois que j'ai fais le tour.

Quelles informations supplémentaires ils vous faudrait pour pouvoir m'aider?

Merci.

Et côté matos ? Récent ou vieux coucou ?

CPU ? Ram (memtest ?) ? HD ?

Peut etre pourrais tu poster le bout de syslog et de erreur.log qui precede le plantage...
avec un peu de chance quelqu'un y trouvera une piste

C'est un HP compaq d330 ut.

Il doit avoir 2 ou 3 ans maxi.

Je viens de faire le test avec memtest et il me sors aucune erreur.

La machine :

CARTE MERE ET PROCESSEUR

# dmidecode 2.9
SMBIOS 2.3 present.

Handle 0x0001, DMI type 0, 20 bytes
BIOS Information
Vendor: Hewlett-Packard
Version: 786B2 v2.04
Release Date: 10/03/2003
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported

Handle 0x0026, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1

# dmidecode 2.9
SMBIOS 2.3 present.

Handle 0x0005, DMI type 4, 35 bytes
Processor Information
Socket Designation: XU1 PROCESSOR
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 29 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) 4 CPU 2.66GHz
Voltage: 1.5 V
External Clock: 533 MHz
Max Speed: 3200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x0006
L2 Cache Handle: 0x0007
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

MES CARTES PCI

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03)
05:09.0 Communication controller: Agere Systems LT WinModem (rev 02)

MES PERIPHERIQUES USB

Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Comme suggéré par Enjolras dans son post, essaie de poster un bout de ton syslog ;-\

Autant pour moi, j'avais pas vu le post donc :

syslog :

Mar 21 02:09:01 SRVDEBIAN /USR/SBIN/CRON[6572]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Mar 21 02:17:01 SRVDEBIAN /USR/SBIN/CRON[6584]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 21 02:39:01 SRVDEBIAN /USR/SBIN/CRON[6587]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Mar 21 03:09:01 SRVDEBIAN /USR/SBIN/CRON[6598]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Mar 21 03:17:01 SRVDEBIAN /USR/SBIN/CRON[6609]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
---------->>> PLANTAGE entre 03:35:35 et 03:38:35
Mar 22 08:26:56 SRVDEBIAN kernel: imklog 3.18.6, log source = /proc/kmsg started.
Mar 22 08:26:56 SRVDEBIAN kernel: [ 0.000000] Initializing cgroup subsys cpuset

Mar 16 22:39:01 SRVDEBIAN /USR/SBIN/CRON[19727]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Mar 16 23:09:01 SRVDEBIAN /USR/SBIN/CRON[19741]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Mar 16 23:17:01 SRVDEBIAN /USR/SBIN/CRON[19755]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 16 23:39:01 SRVDEBIAN /USR/SBIN/CRON[19759]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
---------->>> PLANTAGE
Mar 17 07:47:00 SRVDEBIAN kernel: imklog 3.18.6, log source = /proc/kmsg started.
Mar 17 07:47:00 SRVDEBIAN kernel: [ 0.000000] Initializing cgroup subsys cpuset

je ne vois rien de special la dedans ...

Effectivement, moi non plus ! :s

Et c'est bien la le probléme. Rien dans les logs n'explique le plantage, le test de la RAM est ok.. Je suis un peu paumé la, je sais plus quoi tester. D'autres idées?