18 réponses
Hello, Ttlm,
Here are the procedures for this remote control:
I] Entering a code:
1) Press and hold S (Setup) for more than three seconds.
2) Press the function key to be programmed.
3) Enter the three-digit code using the keys 0 to 9.
II] Automatic search:
1) Do I]1) and I]2).
2) Press Chan + once while pointing the remote at the device.
3) As soon as the device turns on or off, press ENT once.
III] Identifying a code:
1) Do I]1).
2) Press S (Setup) once; the key to be programmed will turn off and then back on once.
3) Using the keys 0 to 9, successively press one of these keys; when the LED turns off and then back on, you've found the first digit of the code corresponding to the key you just pressed. Repeat the search for the second and third digits, then the LED will turn off by itself when the third digit is discovered. You now have your code, which you should make sure to note either on the back of the remote or on a piece of paper.
I hope my procedure is clear, Good luck. On my side, I am looking for the code for the SilverCrest Divx/Xvid DVD player, as I couldn't find it even with the auto search.
Thank you and have a good day.
Here are the procedures for this remote control:
I] Entering a code:
1) Press and hold S (Setup) for more than three seconds.
2) Press the function key to be programmed.
3) Enter the three-digit code using the keys 0 to 9.
II] Automatic search:
1) Do I]1) and I]2).
2) Press Chan + once while pointing the remote at the device.
3) As soon as the device turns on or off, press ENT once.
III] Identifying a code:
1) Do I]1).
2) Press S (Setup) once; the key to be programmed will turn off and then back on once.
3) Using the keys 0 to 9, successively press one of these keys; when the LED turns off and then back on, you've found the first digit of the code corresponding to the key you just pressed. Repeat the search for the second and third digits, then the LED will turn off by itself when the third digit is discovered. You now have your code, which you should make sure to note either on the back of the remote or on a piece of paper.
I hope my procedure is clear, Good luck. On my side, I am looking for the code for the SilverCrest Divx/Xvid DVD player, as I couldn't find it even with the auto search.
Thank you and have a good day.
Hello, I need the code for the Lifetec LT 4688 remote control for my Bluesky TV. Do you have it, please? Thank you in advance.
Hello,
No user manual on the Medion France website (Lifetec = Medion sold mainly by Aldi)
On German-speaking sites, there is a manual, without a list of codes, but with 2 methods to find the code for the device you have in front of you. In any case, Bluesky (= Carrouf) is rarely listed in the code lists.
You can also go there. Click on More info under the Email Support section, fill out the form, and finish by clicking Send.
So far, they have always replied by email, ... depending on what they have available..
--
To err is human, to persist is diabolical.
No user manual on the Medion France website (Lifetec = Medion sold mainly by Aldi)
On German-speaking sites, there is a manual, without a list of codes, but with 2 methods to find the code for the device you have in front of you. In any case, Bluesky (= Carrouf) is rarely listed in the code lists.
You can also go there. Click on More info under the Email Support section, fill out the form, and finish by clicking Send.
So far, they have always replied by email, ... depending on what they have available..
--
To err is human, to persist is diabolical.
Nothing more than what is indicated in post 9.
Do what is stated in the last paragraph.
You can also try the codes 017 027 82 164 which are those of the remote control LT41169 and are probably the same.
--
To err is human, to persist is diabolical.
Do what is stated in the last paragraph.
You can also try the codes 017 027 82 164 which are those of the remote control LT41169 and are probably the same.
--
To err is human, to persist is diabolical.
Hello,
I’m coming to this forum hoping that you can help me!
I recently got a Wii, and when I tried to connect it to my television (Transcontinents), I wasn’t able to switch to the AV channel. Additionally, I have a Lifetec LT4688 remote control that I bought at Aldi a few years ago.
However, the television works correctly with this remote, but some buttons don’t correspond correctly (for example: the AV button corresponds to the teletext on my remote but no other button corresponds to the AV button, and I need that button to use the Wii!)
I’m not sure if I was clear enough; I hope to receive a response soon to solve this issue.
Thank you in advance.
I’m coming to this forum hoping that you can help me!
I recently got a Wii, and when I tried to connect it to my television (Transcontinents), I wasn’t able to switch to the AV channel. Additionally, I have a Lifetec LT4688 remote control that I bought at Aldi a few years ago.
However, the television works correctly with this remote, but some buttons don’t correspond correctly (for example: the AV button corresponds to the teletext on my remote but no other button corresponds to the AV button, and I need that button to use the Wii!)
I’m not sure if I was clear enough; I hope to receive a response soon to solve this issue.
Thank you in advance.
Hi,
Sorry, Veuvenoire07, but the site you recommend provides codes in four digits. However, the remote control in question here is the LT4688 and the codes are in three digits.
Thank you.
Knowledge is a bottomless well that keeps filling up, and it is up to each person to quench the thirst of the ignorant.
Sorry, Veuvenoire07, but the site you recommend provides codes in four digits. However, the remote control in question here is the LT4688 and the codes are in three digits.
Thank you.
Knowledge is a bottomless well that keeps filling up, and it is up to each person to quench the thirst of the ignorant.
Salut, j'ai un magnétoscope Sony RTM-V222E
je recherche un code télécommande pour la télécommande afin de contrôler un téléviseur Sharp.
Merci.
je recherche un code télécommande pour la télécommande afin de contrôler un téléviseur Sharp.
Merci.
???
Explain a little better.
If we stick to what you're writing, you want the code to control a Sharp television from a Sony VCR.
That's certainly not what you're looking for. lol
Explain a little better.
If we stick to what you're writing, you want the code to control a Sharp television from a Sony VCR.
That's certainly not what you're looking for. lol
Alors, si vous avez les codes pour la télécommande Lifetec avec ma TV, pouvez-vous me les donner s'il vous plaît ?
Hello,
This is a known issue. Universal remote controls are not as universal as their manufacturers claim. https://www.telecommandier.com/PBCPPlayer.asp?ID=55449
It is quite common for certain functions, especially the Menu and AV buttons, not to work.
Try using the other codes for the Transcontinents brand. Also try the other codes that the search method might detect.
Sometimes, depending on the functions, you might need to use 2 different codes! Not very practical.
--
To err is human, to persist is diabolical.
This is a known issue. Universal remote controls are not as universal as their manufacturers claim. https://www.telecommandier.com/PBCPPlayer.asp?ID=55449
It is quite common for certain functions, especially the Menu and AV buttons, not to work.
Try using the other codes for the Transcontinents brand. Also try the other codes that the search method might detect.
Sometimes, depending on the functions, you might need to use 2 different codes! Not very practical.
--
To err is human, to persist is diabolical.
<slt> I have a Lifetec TV and a Lifetec universal remote, but I don't know how to set it up to work with my TV. Can you help me? Thanks.</slt>
Hello,
First, you need to indicate the reference of your remote control: LT41169, LT80833, or .... ?
--
To err is human, to persist is diabolical.
First, you need to indicate the reference of your remote control: LT41169, LT80833, or .... ?
--
To err is human, to persist is diabolical.
I am looking for the codes for the Lifetec LT 4688 remote control for my Sony Bravia TV. Thank you in advance.
Try with the codes for the 41169 https://mesnotices.20minutes.fr/manuel-notice-mode-emploi/MEDION/MD%2041169-_F They must be the same.
--
To err is human, to persist is diabolical.
--
To err is human, to persist is diabolical.