View original (French)

NINCO DVX 361 T

zipwaka -  
 dedelmil -
Hello, please, to reset a reader: NINO DVX 361 T how to do it? The channels are offset, impossible to put them back in order.. Thank you very much to you all SINCERELY

13 answers

  1. jp
     
    Étape par étape
    1.- Allumer
    2.- Ouvrir le plateau
    3.- Entrer 5, 1, 6, 8 (cela accédera au menu caché)
    4.- Sélectionnez la région (0 = multi-région. 0 se trouve à droite du « code de puce », au-dessus de la Région 1)
    5.- Quitter le Menu de configuration et éteindre
    6.- Allumer... et profiter
    7
  2. arno
     
    It's not complicated, we can't do it. We need to bring back the device that has this defect, and it's not the zooming that can do anything. Also, PVR recording on this type of low-cost device seems to be of poor quality. For my part, I returned the DVX 361 T to Carrefour due to its channel problem, then the AKAI STD 1990 to Leclerc because it couldn't record. I'm now leaning towards a real hard-disk recorder like the Samsung SH893.
    2
  3. lllhuhdklll Posted messages 1 Registration date   Status Member Last intervention  
     
    Hello, my channels aren’t in order either, but I don’t understand the solution above.
    0
  4. steph21082
     
    Good evening
    I have a Kaford DVX361T
    I can't find the 'open tray' button
    thanks for the information
    0
    1. lllhuhdklll Posted messages 1 Registration date   Status Member Last intervention  
       
      Open tray is the button to open the drive.
      I’m stuck at step 4!!!
      0
    2. dedelmil
       
      Hello
      would it be possible for you to explain to me how to install the channels and view them
      that would be nice because I can’t find my manual anymore
      because I have a kaford decoder and frankly I have never managed to place the channels
      thank you very much
      0
    3. dedelmil
       
      I give you my email address
      dedelmil@wanadoo.fr
      0
  6. arno
     
    Same problem, how to fix channel numbers and the time as well
    0
  7. arno
     
    kaford dvx361T
    I manage to complete the 6 steps, we enter SETUP, but this is for removing the DVD player's zone, which is not the topic.
    For my part, I understood my time-setting problem, I’m missing the first digit!!! e.g. 21:15 = 1:15. Hallucinatory, yet I have seconds displaying. Regarding the channel order, still no solution, but maybe it’s the CSA channel list that isn’t compatible. Other than that, recording to USB is a bit choppy, isn’t it for you?
    0
    1. ji2m
       
      hello
      Have you managed to sort your chains?
      The USB recording skips: do you do it on a flash drive or on an external hard drive (with power supply or not). Personally, I haven’t tested this feature yet.
      0
    2. lllhuhdklll
       
      I saved it on a hard drive with power and it works perfectly.
      0
    3. arno
       
      Indeed, I bought an externally powered Samsung hard drive and the recording works great with the AKAI STD 1990. Now, I don’t see how to schedule a delayed recording; maybe with another firmware it would work.
      0
    4. lllhuhdklll
       
      I also think so, but how to put it on the NINCO?
      0
  8. steph21082
     
    Hi everyone
    I brought mine back to Carrefour
    and they weren’t able to put the chains in order
    I returned the device
    they tell me they aren’t aware of the problem
    I’m going to write to Carrefour’s management
    I advise you to do the same
    the more people there are the more they’ll have to act
    0
  9. arno
     
    I brought it back to Carrefour which refunded me, you can't sort the channels!
    Furthermore, I bought the AKAI STD 1990, and just like the KAFORD, the PVR recording on a USB key stutters and is therefore unusable. So does anyone use the PVR function correctly?
    0
  10. andy
     
    I managed to do the trick shown above. I tried all the zones and every time I did a search for the string, it doesn’t change the order of the strings. How can I make sure everything is in the right order when it’s all in disarray?
    Has anyone managed to put the strings back in order and how do you do it?
    Thanks for your help
    0
  11. saillantist
     
    So regarding the de-zoning, it’s only about the DVD player; it won’t change the TNT problem.

    So I bought it today (also at Carrefour). When I saw the price of 49€, I told myself: for a DVD player, DIVX TNT with USB recording, not expensive (it’s about 10-20€ more in other brands).

    First bad surprise: the remote control looks like it came from a toy section.

    Moreover, being with Numéricable (since this month DVB-T is available in Lille), this TNT ~#{[|'\^ can’t even find all the channels and they’re out of order.

    I think I’m going to return it tomorrow :/
    0
  12. saillantist
     
    Otherwise we can classify the channels manually

    Setup > Channel editing, with the right arrow we go to the move column, press OK, then with the up and down arrows you can move the selected channel.
    0
  13. saillantist
     
    This manipulation theoretically puts things in order, but in fact it changes nothing :(

    as for the issue of the missing channel, I’m missing more than France 3
    I think Numericable is stopping analog broadcasting and preparing the whole TNT, hence the incidents these days
    0
  14. forestoy
     
    Same for me, I keep trying, but nothing works.
    The instruction is explained too well moreover.
    If someone has an answer, that would really be great.
    0