View original (French)

Trixbox voicemail

Solved
shinn Posted messages 48 Status Member -  
 cocodjodjo -
Hello,

I am posting this message to ask for help with my TrixBox. Here is my problem:

*I have a Trixbox server installed on a computer that I am connected to via LAN
*I am using the asterisk server, specifically FreePBX
*I work graphically through Trixbox
*My problem is the configuration of my voicemail:
I have installed all the necessary packages (I think)
I have added SIP users
I have enabled voicemail for them
When I call a busy user I indeed reach a voicemail but it is in English, I cannot set a personalized message for the voicemail.

Here is the information I need:

_How to add a voicemail to a user
_How to configure this voicemail so that when I call a busy user I reach the message I recorded.
_I welcome any other information about configuring voicemail on TrixBox.

Thank you in advance to those who will respond
Configuration: Windows 7 Firefox 3.0.3

6 answers

  1.
    shinn Posted messages 48 Status Member 8
     
    Yes, the voicemail is activated because when I call a busy user, I get an English message telling me to leave a message, I leave a message and I can then listen to it by calling my voicemail.

    My only problem is changing the welcome message of my voicemail.
    1
  2. tchaning Posted messages 4629 Status Member 299
     
    try to configure it directly on the client: you call your mailbox + password *98
    --
    Don't forget to mark your posts as Resolved if that's the case.
    Thank you
    0
  3. shinn Posted messages 48 Status Member 8
     
    Yes, I understand what you mean, but my real problem is not there.
    In fact, I have already used *77 to record a message, for example, then I put it in "announcement" in Trixbox, but I still have the default welcome message in English; it’s that message that I can’t change.
    0
  6. shinn Posted messages 48 Status Member 8
     
    It's all good, problem solved; I downloaded the French modules from another site and installed them instead of the English modules.
    0
    1. frolland
       
      Hello Shinn,

      I'm currently facing the same problem as you...
      Have you kept the address of the modules in French? Or their names?

      Best regards,
      0
      1. cocodjodjo > frolland
         

        yaya

        1
    2. Ratsigan
       
      There’s an easier way to change your voicemail message, just call the voicemail box *97 and listen to the lady ^^. Basically, to change your message, just press 0 to access your voicemail options, then press 1 to change your message. Once the beep sounds, record your desired message and press # to finish. Press 1 to confirm the message and voilà, you’re done :).
      0
  7. bigwest9
     
    Hello!
    I'm new to telephony and currently configuring a TrixBox 2.8.0.3 server, but I'm stuck on several things:

    1: How to receive calls that come in on the landline from the extensions and also make calls through that same line?

    2: What hardware is needed? Knowing that I only have a France Telecom line, a Livebox, and my TrixBox server with local SIP accounts.

    3: How to configure the Day/Night mode so that it goes to voicemail at night?

    4: What is needed to configure Sendmail?

    Thank you for your answers.
    0