Je n'arrive pas à télécharger ma carte reseau
Résolu/Fermé
A voir également:
- Je n'arrive pas à télécharger ma carte reseau
- Carte d'identité - Guide
- Telecharger whatsapp pour pc - Télécharger - Messagerie
- Comment télécharger une vidéo youtube - Guide
- Tubidy.com musique audio mp3 telecharger musique religieuse catholique ✓ - Forum Téléchargement
- Télécharger carte maps - Guide
8 réponses
Utilisateur anonyme
29 sept. 2009 à 19:40
29 sept. 2009 à 19:40
Salut,
as tu des points d'interrogations jaunes dans le gestionnaire de périphériques ? si oui, où ?
clic-droit sur le "Poste de travail" puis choisir "Propriétés" onglet "Matériel" puis cliquer sur le bouton "Gestionnaire de périphériques"
as tu des points d'interrogations jaunes dans le gestionnaire de périphériques ? si oui, où ?
clic-droit sur le "Poste de travail" puis choisir "Propriétés" onglet "Matériel" puis cliquer sur le bouton "Gestionnaire de périphériques"
Utilisateur anonyme
29 sept. 2009 à 20:06
29 sept. 2009 à 20:06
Dans le gestionnaire de périphériques, fais un clic droit sur: "contrôleur ethernet" (là où tu as le point jaune) propriété => détails.
Dans le menu déroulant sélectionnes: "numéro d'identification du matériel".
Postes les renseignements. (suite de chiffres et de lettres)
copie seulement la première ligne, c'est suffisant.
Dans le menu déroulant sélectionnes: "numéro d'identification du matériel".
Postes les renseignements. (suite de chiffres et de lettres)
copie seulement la première ligne, c'est suffisant.
Utilisateur anonyme
29 sept. 2009 à 20:20
29 sept. 2009 à 20:20
Dans le gestionnaire de périphériques, fais un clic droit sur: "contrôleur ethernet" (là où tu as le point jaune) propriété => détails.
Dans le menu déroulant sélectionnes: "numéro d'identification du matériel".
Postes les renseignements. (suite de chiffres et de lettres)
-copie seulement la première ligne, c'est suffisant.
Dans le menu déroulant sélectionnes: "numéro d'identification du matériel".
Postes les renseignements. (suite de chiffres et de lettres)
-copie seulement la première ligne, c'est suffisant.
Utilisateur anonyme
29 sept. 2009 à 20:47
29 sept. 2009 à 20:47
essaie ce pilote : http://ftp.us.dell.com/network/R54402.EXE
Voila ceux qui me met quand je telecharge ce fichier, mais toujours pas de carte reseau.
Que faire ?
Revised on 2 May, 2002
Copyright (C) 1998, 1999, 2000 Dell Computer Corporation. All rights reserved.
https://www.dell.com/fr-fr
To reinstall the NIC driver for Windows 2000, perform the following steps:
1. Right-click the My Network Places icon, click Properties.
2. Right-click the Local Area Connection icon, click Properties.
3. Click Configure, click the Driver tab, click Update Driver.
4. Select Display a list of known drivers….., and click Next, and then click Have Disk.
5. Verify that A: is entered in the Copy manufacturer’s files from box, or use the Browse button to point to the directory the driver was extracted to. (i.e. c:\dell\drivers\….)
6. Click Open on the default filename selected, and click OK, and NEXT, and NEXT to install the driver.
To reinstall the NIC driver for Windows XP, perform the following steps:
1. Click Start, Right-click the My Computer icon, click Properties.
2. Click the Hardware tab, click the Device Manager button.
3. Click the + next to Network Adapters. Right click on the appropriate network adapter, click Properties.
4. Click on the Driver tab, click the Update Driver button.
5. Select Install from a list of specified location (Advanced), click Next.
6. Click Don’t Search, I will choose the driver to install, click Next
7. Click the Have Disk button.
8. Verify that A: is entered in the Copy manufacturer’s files from box or use the Browse button to point to the directory the driver was extracted to. (i.e. c:\dell\drivers\….)
9. Click OK to install the driver.
10. Verify that Intel® PRO/1000 MTW Network Connection or Intel® PRO/1000 MT Network Connection is highlighted.
11. Click Next, click Finish.
To reinstall the NIC driver for Windows NT 4.0, perform the following steps:
Double-click the My Computer icon, double-click Control Panel, and then double-click the Network icon.
NOTE: If you are installing networking on your system for the first time, the Windows NT operating system displays a message asking if you want to install networking. Click Yes, and refer to your Windows NT documentation for instructions.
Click the Adapters tab in the Network Control Panel, and then click Update.
Type in the location of the network drivers and then click Continue.
Click Yes in the Network Settings Change window to restart your system.
Que faire ?
Revised on 2 May, 2002
Copyright (C) 1998, 1999, 2000 Dell Computer Corporation. All rights reserved.
https://www.dell.com/fr-fr
To reinstall the NIC driver for Windows 2000, perform the following steps:
1. Right-click the My Network Places icon, click Properties.
2. Right-click the Local Area Connection icon, click Properties.
3. Click Configure, click the Driver tab, click Update Driver.
4. Select Display a list of known drivers….., and click Next, and then click Have Disk.
5. Verify that A: is entered in the Copy manufacturer’s files from box, or use the Browse button to point to the directory the driver was extracted to. (i.e. c:\dell\drivers\….)
6. Click Open on the default filename selected, and click OK, and NEXT, and NEXT to install the driver.
To reinstall the NIC driver for Windows XP, perform the following steps:
1. Click Start, Right-click the My Computer icon, click Properties.
2. Click the Hardware tab, click the Device Manager button.
3. Click the + next to Network Adapters. Right click on the appropriate network adapter, click Properties.
4. Click on the Driver tab, click the Update Driver button.
5. Select Install from a list of specified location (Advanced), click Next.
6. Click Don’t Search, I will choose the driver to install, click Next
7. Click the Have Disk button.
8. Verify that A: is entered in the Copy manufacturer’s files from box or use the Browse button to point to the directory the driver was extracted to. (i.e. c:\dell\drivers\….)
9. Click OK to install the driver.
10. Verify that Intel® PRO/1000 MTW Network Connection or Intel® PRO/1000 MT Network Connection is highlighted.
11. Click Next, click Finish.
To reinstall the NIC driver for Windows NT 4.0, perform the following steps:
Double-click the My Computer icon, double-click Control Panel, and then double-click the Network icon.
NOTE: If you are installing networking on your system for the first time, the Windows NT operating system displays a message asking if you want to install networking. Click Yes, and refer to your Windows NT documentation for instructions.
Click the Adapters tab in the Network Control Panel, and then click Update.
Type in the location of the network drivers and then click Continue.
Click Yes in the Network Settings Change window to restart your system.
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Utilisateur anonyme
29 sept. 2009 à 21:36
29 sept. 2009 à 21:36
bon, il faudrait que tu installes en premier un service pack.
télécharges et installes le SP3. (mise à jour xp)
http://ftpclubicb9b.clubic.com/...
télécharges et installes le SP3. (mise à jour xp)
http://ftpclubicb9b.clubic.com/...
Utilisateur anonyme
30 sept. 2009 à 07:18
30 sept. 2009 à 07:18
Dans le gestionnaire de périphériques, fais un clic droit sur: "contrôleur ethernet" (là où tu as le point jaune) propriété => détails.
Dans le menu déroulant sélectionnes: "numéro d'identification du matériel".
Postes les renseignements. (suite de chiffres et de lettres)
copie seulement la première ligne, c'est suffisant.
Dans le menu déroulant sélectionnes: "numéro d'identification du matériel".
Postes les renseignements. (suite de chiffres et de lettres)
copie seulement la première ligne, c'est suffisant.
Utilisateur anonyme
30 sept. 2009 à 17:01
30 sept. 2009 à 17:01
salut,
essaie ce pilote : http://ftp.us.dell.com/network/R66787.EXE
essaie ce pilote : http://ftp.us.dell.com/network/R66787.EXE
29 sept. 2009 à 20:03
29 sept. 2009 à 20:10