View original (French)

Cut with Cutmatic plotter

sony -  
taz26240 Posted messages 1 Status Member -
Hello,
I have just acquired a first-generation cutting plotter (about 10 years old) with a width of 630 mm, brand Isermatic (Cutmatic).
I already have cutting software, Easy Sign, with its key (I used to cut with a Roland PNC 1100). I would like to know if anyone has successfully cut with software other than that of Cutmatic (from Isermatic)?

Apparently, the machine is restricted. I want to cut with Easy, which I know very well, and not use their software (Cut V2_8).
Thank you for your response.
Best regards,
Sony
Configuration: Windows XP Internet Explorer 7.0

3 answers

  1.
    taz26240 Posted messages 1 Status Member 3
     
    Hello

    The cutmatic 2 and 3 from isermatic can be used with Adobe, Corel, Inkscape, Flexisign. Just select Print, choose the printer pdf 995 and open the cutmatic 3 console.
    Their contract system allows you to have a plotter available for a calculated consumable usage fee for a monthly amount. Their customer service is handled in less than 24 hours. There’s always someone on the phone

    Additionally, they are the only French manufacturer.
    3
  2. fifo
     
    Hello,

    I have the same problem as you, have you found a solution?

    Fifo
    1
    1. sony
       
      In the end, I bought another Roland plotter that works with my Easy Sign cutting software. For the other machine, Cutmatic, I had to go through the sales department, which would give me a license number to be able to cut, in exchange for a certain quantity of adhesive film purchased from them. Since I want to choose my films... I switched suppliers.
      Best regards.
      0
  3. COMPTA75
     
    for the software, the Dikacut 2010 is very good and costs only €150 with support included
    http://dikafrance.fr/index.php?page=logiciel
    Alexis Roger
    0