Démarrer depuis CD-Rom AHCI Solved

Question

Hello,
I hope I've placed this topic in the right section.
Here’s my problem, I just received a new PC (Vista) and every time it starts up, for about twenty seconds, it shows "Boot from AHCI CD-Rom". I would like to know where this comes from and how to fix it...
Thanks in advance.

Configuration: Windows Vista Firefox 3.5.2

matjé · Accepted Answer

At startup of your PC, press the "Delete" or "F2" key, depending on the BIOS! Then, once inside, navigate with your keyboard (the arrows/enter/escape) where you will see several categories, including one called "boot sequence" or something similar! Set the hard drive as the first option, then look at the bottom as it will tell you everything to exit and save.

matjé · Answer

Hi, it means that your PC is trying to boot from the CD/DVD drive first! You can go into the BIOS and reset the boot priorities in the settings, setting the HDD to 1.

Pierro77 · Answer

Where is the BIOS located? (I'm not very good at computers ...)

matjé · Answer

especially if you don't know anything about it, don't touch anything else :)

Pierro77 · Answer

Thank you, I'm going to take the risk ;) I'll keep you posted.

le druide · Answer

Hi,

when your PC starts, does it not display "Press F2, F12 for Setup" or something similar at the bottom of the screen?

Once the key is pressed, a setup screen appears and then you check the boot menu to change the boot order of the drives: CDROM, HDD, USB, etc....
--

the druid without the potion.

Pierro77 · Answer

The problem is solved, a big thank you to you Matjé, for the speed and efficiency of your response.

Vnus · Answer

I had exactly the same problem and Matjé's advice solved it! Thank youuuu! :D
I have a question though. How is it that one day the startup order is correct and the next day it is different, without us having played in that department? Thank you for the answer!

zero · Answer

I have the same issue, except that I can't get into the BIOS, even by pressing F12, F2, or Delete... Any solution?

Fredy1973 · Answer

essay F3

pierrobru00 · Answer

Hello, in what order should I place the elements (USB HDD; USB FDC; PCI BEV; USB KEY; PCI SCSI)?

And why are the 2 elements "USB CD ROM" and "USB ZIP" in a different category (Excluded from boot order)?

Thank you for your answers ;)

Pierro

Démarrer depuis CD-Rom AHCI

11 answers

The ctrl key works intermittently

Antivirus problem

Wifi connection issue

Connecting a sony handycam video 8 ccd f555e to an hd tv

Hello sir

Incompatible display driver

Sensitive sites blocking tool

Ink absorber

Phone battery life

Pin code (windows hello)