dream box blocked Solved/Closed

Question

Hello, When I plug in my Dreambox 500s, I can't do anything with the remote, not even turn it off.  Could this be due to a problem with the satellite dish?  Yeah thanks for a response

tsoprano · Accepted Answer

Good evening,

I had exactly the same problem as you, I had a clone and it was blocked by flashing a firmware. At the time I had a contact who sold me the JTAG lol

in a few minutes it was done, it returned to its normal state... 185 euros saved.

++

montonton · Answer

Hello my friend.

I have a solution to your problem. We can unlock the Dreambox 500; I’ve done it for mine. In general, it is unfortunately accepted that if a box is blocked, it is dead if it cannot start. We can talk about it if you want on MSN: my nickname is xxxxxxx@hotmail.com. It should work for you too. Otherwise, if you want, call me at 00-216-23-409-007; I am in Tunisia; we can arrange an appointment on MSN. You can then post the solution on the forum if it works (we’ll do it together) so that everyone can benefit.

Cheers to you; see you soon if you wish

(Email address removed, Modération CCM).

marc2007 · Answer

Hello I have my Dreambox 500 C which is blocked with the green LED on and TV screen black, I tried to flash with Dreamup 2.14 and Dreamup Universal and DCC but still blocked. can someone help me S:V.P please

marc2007 · Answer

Hello, I have the same problem as you with your Dreambox 500, it’s blocked. Have you solved the problem, if yes how? regards

xénoplus · Answer

Hello,
this morning, when turning on my Dream 500, a message appeared signaling < attention, see your dealer, goodbye > and there are no more red or green indicator lights.
no longer possible to turn on the Dream!!!!!
What should I do???
Thank you for your answers.

tsoprano · Answer

Hi xénoplus,

this message appears when it's a clone, and you put a firmware with protections on it.

It is now possible to repair it. but if you just bought it, have the warranty exercised.

otherwise, I bought a JTAG for the DM500 on eBay. however, it is very, very hard to find!

damdoum · Answer

the decryption of certain bouquets, how does it work

habboub2007 · Answer

Thank you, Davence.

alerte38 · Answer

Hello
Here is the trick for blocked DREAM
You need to download DREAMUP / GEMINI 410 and a FEMALE RS232 or USB to RS232 cable
And redo your DREAM
And voila everything works again
For more info you can send me a message or MSN /xxxxxx@live.fr
good luck

(Email address removed, Moderation CCM).

amine · Answer

You need to format it: send me your email.

jalou · Answer

No, it’s not a problem with the parabola, but with the Dream Box. They all have this, don’t worry, it’s normal.

CHEB · Answer

Hello,

By turning on my dm 500 again, there’s no image, only the green indicator light on (it was configured in Tunisia with a one-year subscription...) after 5 days of use IT Fails!!! How to repair it while keeping that sharing configuration, basically without flashing it?

I would be very grateful to anyone who wants to help me :-(

sttoff · Answer

Hello,   I had the same problem as CHEB thank you in advance for your help if someone has the solution.   SEE YOU.

azaro. · Answer

when you see that the receiver is not receiving any information; that means you must repair the receiver.

hichhh · Answer

I just got one in the village the seller told me it was already configured and that I just had to plug it into my modem and it doesn’t work it says program not found how to do help

jalou · Answer

Hello cousin. Where are you going or after you go to settings and you search for new channels. It doesn't work you change the head and you do a new search for channels. good luck. jalou123@hotmail.fr

krimo28 · Answer

Hello everyone and SALAM to all, I’d like information about the Dreambox 500-S. Before connecting it to the internet there were channels, and once I connected it, all the channels showed “service not found.” This morning I tried to turn it on again to use it, and to my surprise the LED is stuck on green and I can’t reset it. If you have any answers, thank you. I’m a total beginner with the words used; please use understandable terms.

karim · Answer

you have to unplug the plug that turns it on and then plug it back in

wartito · Answer

Hello,

I recently (two weeks ago) bought a DreamBox 500S in Morocco, the seller tested it in front of me, everything worked fine. When I returned to France and tried it, I plugged it in correctly in place of my parents' ordinary decoder (which works without issue), and there it says "Service not found". So I brought it to my cousin who has the same one to try, and at his place it works without any problem... Both of us have a dual head.

Could someone please help me?

Thank you in advance.

veterant · Answer

Hello,
when I boot my Dreambox 500, I see the green LED but inside I see an orange light although it is supposed to be green. The Dream works correctly for about 5 minutes, then the image freezes and I no longer have control of the remote.

souli · Answer

Hello, I can’t pick up more channels on my Dreambox. How do I recharge it? Thanks in advance.

ERK77 · Answer

Hello,

Is there anyone in RP who could reconfigure my DM 500 S clone for me? I don’t understand anything about flashwizard, RS-232, RJ45 crossed, it’s all Greek to me.

I’m in the southern part of the Paris region, and if someone knows how to handle it well, I’d be interested.

Thanks in advance to everyone.

ERK77

hamidu93 · Answer

Hello, I can help you.

Saku-77 · Answer

Good evening everyone, I have a Dreambox 500-S, I’ve actually had it for almost two months but I still hadn’t used it. Today, when trying to plug it in, the LED that was supposed to be red when it’s off and green when it’s on isn’t lighting at all, while inside the small box I can see a green light. Knowing that when I bought it, everything was fine and the LED would light up. Could it be a power supply issue, a short circuit, or something like that, or is it something else? I hope one of you can shed some light on this, thanks in advance =) Have a good evening.

bouz · Answer

Good evening,  I bought a Dreambox in Algeria in August, I had all the channels, and since the end of September I’ve lost CanalSat, and now I have a remaining days countdown for the other channels. Could you help me recover all the channels and stop the countdown?  Thank you

hertzien · Answer

Hello,
I simply want to know how to properly turn off the Dreambox after finishing watching programs on the TV in the evening, or when I just want to switch it off, what should I do?
Thanks in advance.

Dream box blocked

26 answers

Line height not remembered in calc

First pc tip:

Unable to install browser

Customize and sanctuarize your windows folder icons

Windows 11 search bar isn’t working anymore

Message saying that my phone is compromised

Unable to print from my smartphone.

Very slow computer

Unable to download a windows update

Request for connection choice