Yes, it appeared well after I changed my CD drive. Furthermore, often when the computer manages to start up, suddenly I get a blue screen with the following message "Windows has detected a problem..." and the computer shuts down and restarts.
matjé
At startup, hold down the Delete or F2 key, depending on your system, and you will enter the BIOS! There, look for the hardware category; it's not that hard, and you'll see if your drive is listed! For booting, look for boot sequence and set your hard drive as the first option.
snake31
Author
I just went into the BIOS and my drive is recognized and the hard disk is in first position.
matjé
Have you checked in the BIOS if your drive is recognized? Also, remember to set the hard drive as the first boot option.
snake31
Author
Pour vérifier si votre lecteur est reconnu dans le BIOS, suivez ces étapes :
1. Redémarrez votre ordinateur.
2. Pendant le démarrage, appuyez sur la touche d'accès au BIOS (généralement "Delete", "F2", "F10" ou "Esc", selon le fabricant de votre carte mère).
3. Naviguez dans les menus du BIOS à l'aide des flèches de direction.
4. Cherchez une section appelée "Storage" ou "Drives".
5. Vérifiez si votre lecteur apparaît dans la liste des périphériques de stockage.
Si votre lecteur n'est pas reconnu, vérifiez les connexions physiques et redémarrez le système pour réessayer.