Damaged USB drive

I succeeded!!! A big THANK YOU to you. I don't know why, but when I press the red Thank You, it doesn't work. I thank you very much for your help!

Sometimes it's a hassle to find the right one, but I always manage.

I've bought enough keys with fake capacities of 64, 128GB that were actually 8, 16, 32GB (which corrupted the data) and restored their true capacity with programs like that, they work fine now.

Here’s the page (Main Page) of Alcor

https://www.usbdev.ru/files/alcor/

The tools I've suggested are in the sections AlcorMP and AlcorMP [.MD | by nat27]

You can try them all...

AAMP can be handy sometimes too, but without guarantees (sometimes there are tools to do a "hard reset"), but you have to be careful not to make the key completely undetectable, it depends on the tools, but I don't really remember what I did with AAMP, I've probably used it before.

I did some research and the only lead I have is this one, but it doesn't detect SDTNRCAMA-008G.

You can search on Google as I said earlier

You can search on Google using keywords with the details of the controller AU6989

Of the memory chip SDTNRCAMA-008G

Of the Vendor/Product ID VID = 058F PID = 6387

You may find some answers in Russian that you can translate with Google Translate

I selected 3 versions with AU6989SN "AU6989" and it gives me the same thing in red "no support flash...". There are many versions and I’m not sure if I chose correctly :/

What should I do after cleaning?

I'm not sure about the problem, but you can clean it up with USBOblivion

https://sourceforge.net/projects/usboblivion/

Unplug all your USB devices beforehand, it will erase all their traces.

It's not working, I launch the file AlcorMP.exe and it shows me the error like in the screenshot I showed just above :(

However, I haven't used FlashMaster.exe in the ChipGenius folder yet because it's written in a foreign language.

I just noticed that I can start the program, but when I plug in the USB key, it gives me this error :/

I installed AlcorMP_UFD 12.12.26.MD {AU6990,92,96,98}; AlcorMP(121226.MD).rar; size: 4,419,505 bytes and I can't launch it like the previous version. Now, I no longer have the unreadability error, but only that the disk is write-protected.

Try the 2012 versions

https://www.usbdev.ru/files/alcor/alcormpmd/

Like

AlcorMP_UFD 12.12.26.MD {AU6990,92,96,98} ; AlcorMP(121226.MD).rar; size: 4,419,505 bytes

You can try older versions, as I wrote.

Sometimes they remove old information in the new versions, and it's an old version that's needed.

If you get discouraged, it will just turn the keys into trash.

If you succeed, you'll have a like-new key that didn't cost you anything extra.

It's too complicated for me because I don't know anything about it and I tried to flash it but it gives me an error, I think. I think I'm going to give up because I feel cursed in this area of computing x) Thank you very much for your help.

After flashing, you format it and test it with H2testw 1.4

If it detects corrupted memory, you try another tool to flash it

The tool designed to flash it may be quite old

You can search on Google with keywords including the details of the controller SC908/AU6989 [E001]

Of the memory chip SanDisk SDTNRCAMA-008G

Of the Vendor/Product ID VID = 058F PID = 6387

You can set these programs in English and check in the Settings if everything is OK, then Start or ALL Start

Try the latest tools here from 2019 to flash

https://www.usbdev.ru/files/alcor/alcormpmd/
AlcorU2MP 19.07.03.MD {AU6989SN-GTC/GTD /GTE} ; AlcorMP(190703.MD).rar; size: 8 036 166 bytes

If it doesn't work, try here from 2020:

https://www.usbdev.ru/files/alcor/alcormp/
ALCOR U2 MP v20.09.16.00 {6989SN-GTC/GTD /GTE/TA} | password = usbdev.ru ; ALCOR_U2_MP_v20.09.16.00.rar; size: 8 115 533 bytes

If it doesn't work, you can try other older ones.

Hello,

I don't know the brand.

Description: [E:]USB Mass Storage Device (Generic Flash Disk)
Device Type: Mass Storage Device

Protocol Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = 058F PID = 6387
Serial Number: 2654F6EF

Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0101

Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.07

Controller Vendor: Alcor Micro
Controller Part-Number: SC908/AU6989 [E001] - F/W D811
Flash ID code: 45DE98927256 - SanDisk SDTNRCAMA-008G - 1CE/Single Channel [TLC-8K] -> Total Capacity = 8GB

Tools on web: http://dl.mydigit.net/special/up/alcor.html

Possible Flash Part-Number
----------------------------
[1CE]SDTNPNAHEM-008G x 1 pcs/Channel x 1 Channel
[1CE]SDTNQCAMA-008G x 1 pcs/Channel x 1 Channel
[1CE]SDTNRCAMA-008G x 1 pcs/Channel x 1 Channel
[1CE]SDTNRCAMA-008G x 1 pcs/Channel x 1 Channel

Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
45DE98927256 --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------

Hi,

Generate a ChipGenius log [Text] by right-clicking

https://www.softpedia.com/get/System/System-Info/ChipGenius.shtml

Then tell me the brand of the USB key.

Alright, too bad, thank you for your answers. I don't understand why the key is write-protected. I've already locked two 8 GB USB drives and I don't even know how I did it...

Hello.

A write-protected drive is 99.99% dead. Unless, of course, there’s a switch on it, but those haven’t been sold in a long time. As for the potential recovery of files, even professional software won't be able to access it.

As for an 8 GB drive, don’t waste your time given the price has become very affordable at that capacity.

See you later . . .

--
"Patience leads to success, haste leads to nothing"