Formatage d'une partition.

Bonjour,
J'ai une partition d'environ 50 go, contenant Windows (disque C:), et une partition Linux (disque D:).
Je souhaiterai supprimer tout le contenu de la partition sur laquelle se trouve Windows, pour avoir de l'espace supplémentaire.
Je voudrai donc savoir comment tout supprimer sur cette partition sans toucher à celle de Linux, et si il est possible de la reformater en ext3.
Merci :)
Configuration: Linux
Firefox 3.0.10

8 réponses

  1. Contributeur
    bonjour,
    # This entry automatically added by the Debian installer for a non-linux OS
    # on /dev/sda2
    title Microsoft Windows XP �dition familiale
    root (hd0,1)
    savedefault
    makeactive
    chainloader +1

    si tu supprime la partition ça tu n'en a plus besoin .
    et pour /etc/fstab , rien à modifier pour l'instant vu que la partition windows n'y figure pas , lorsque tu l'auras formater il suffira de l'ajouter .
    exemple
    UUID=08cec720-a0e7-47b0-b3b8-beb712c80f07 /photos                 ext3    defaults        1 2
    

    ceci est un exemple il faudra
    1 remplacer l'uuid par le bon
    ls -l /dev/disk/by-uuid/

    et crrer le point de montage dans mon exemple /photos
    et aussi donner les droit user sur se dossier
    a+

    1. cat /etc/fstab:

      # /etc/fstab: static file system information.
      #
      # <file system> <mount point> <type> <options> <dump> <pass>
      proc /proc proc defaults 0 0
      # /dev/sda6
      UUID=7f320b60-ca9a-4cce-b651-9d063fe9a7da / ext3 relatime,errors=remount-ro 0 1
      # /dev/sda7
      UUID=c0940de8-5e7e-439b-a382-c71d9cbb31bd none swap sw 0 0
      /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0

      cat /boot/grub/menu.lst

      # menu.lst - See: grub(8), info grub, update-grub(8)
      # grub-install(8), grub-floppy(8),
      # grub-md5-crypt, /usr/share/doc/grub
      # and /usr/share/doc/grub-doc/.

      ## default num
      # Set the default entry to the entry number NUM. Numbering starts from 0, and
      # the entry number 0 is the default if the command is not used.
      #
      # You can specify 'saved' instead of a number. In this case, the default entry
      # is the entry saved with the command 'savedefault'.
      # WARNING: If you are using dmraid do not use 'savedefault' or your
      # array will desync and will not let you boot your system.
      default 0

      ## timeout sec
      # Set a timeout, in SEC seconds, before automatically booting the default entry
      # (normally the first entry defined).
      timeout 10

      ## hiddenmenu
      # Hides the menu by default (press ESC to see the menu)
      #hiddenmenu

      # Pretty colours
      #color cyan/blue white/blue

      ## password ['--md5'] passwd
      # If used in the first section of a menu file, disable all interactive editing
      # control (menu entry editor and command-line) and entries protected by the
      # command 'lock'
      # e.g. password topsecret
      # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
      # password topsecret

      #
      # examples
      #
      # title Windows 95/98/NT/2000
      # root (hd0,0)
      # makeactive
      # chainloader +1
      #
      # title Linux
      # root (hd0,1)
      # kernel /vmlinuz root=/dev/hda2 ro
      #

      #
      # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

      ### BEGIN AUTOMAGIC KERNELS LIST
      ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
      ## by the debian update-grub script except for the default options below

      ## DO NOT UNCOMMENT THEM, Just edit them to your needs

      ## ## Start Default Options ##
      ## default kernel options
      ## default kernel options for automagic boot options
      ## If you want special options for specific kernels use kopt_x_y_z
      ## where x.y.z is kernel version. Minor versions can be omitted.
      ## e.g. kopt=root=/dev/hda1 ro
      ## kopt_2_6_8=root=/dev/hdc1 ro
      ## kopt_2_6_8_2_686=root=/dev/hdc2 ro
      # kopt=root=UUID=7f320b60-ca9a-4cce-b651-9d063fe9a7da ro

      ## default grub root device
      ## e.g. groot=(hd0,0)
      # groot=7f320b60-ca9a-4cce-b651-9d063fe9a7da

      ## should update-grub create alternative automagic boot options
      ## e.g. alternative=true
      ## alternative=false
      # alternative=true

      ## should update-grub lock alternative automagic boot options
      ## e.g. lockalternative=true
      ## lockalternative=false
      # lockalternative=false

      ## additional options to use with the default boot option, but not with the
      ## alternatives
      ## e.g. defoptions=vga=791 resume=/dev/hda5
      # defoptions=quiet splash

      ## should update-grub lock old automagic boot options
      ## e.g. lockold=false
      ## lockold=true
      # lockold=false

      ## Xen hypervisor options to use with the default Xen boot option
      # xenhopt=

      ## Xen Linux kernel options to use with the default Xen boot option
      # xenkopt=console=tty0

      ## altoption boot targets option
      ## multiple altoptions lines are allowed
      ## e.g. altoptions=(extra menu suffix) extra boot options
      ## altoptions=(recovery) single
      # altoptions=(recovery mode) single

      ## controls how many kernels should be put into the menu.lst
      ## only counts the first occurence of a kernel, not the
      ## alternative kernel options
      ## e.g. howmany=all
      ## howmany=7
      # howmany=all

      ## specify if running in Xen domU or have grub detect automatically
      ## update-grub will ignore non-xen kernels when running in domU and vice versa
      ## e.g. indomU=detect
      ## indomU=true
      ## indomU=false
      # indomU=detect

      ## should update-grub create memtest86 boot option
      ## e.g. memtest86=true
      ## memtest86=false
      # memtest86=true

      ## should update-grub adjust the value of the default booted system
      ## can be true or false
      # updatedefaultentry=false

      ## should update-grub add savedefault to the default options
      ## can be true or false
      # savedefault=false

      ## ## End Default Options ##

      title Ubuntu 9.04, kernel 2.6.28-11-generic
      uuid 7f320b60-ca9a-4cce-b651-9d063fe9a7da
      kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=7f320b60-ca9a-4cce-b651-9d063fe9a7da ro quiet splash
      initrd /boot/initrd.img-2.6.28-11-generic
      quiet

      title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
      uuid 7f320b60-ca9a-4cce-b651-9d063fe9a7da
      kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=7f320b60-ca9a-4cce-b651-9d063fe9a7da ro single
      initrd /boot/initrd.img-2.6.28-11-generic

      title Ubuntu 9.04, kernel 2.6.27-11-generic
      uuid 7f320b60-ca9a-4cce-b651-9d063fe9a7da
      kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=7f320b60-ca9a-4cce-b651-9d063fe9a7da ro quiet splash
      initrd /boot/initrd.img-2.6.27-11-generic
      quiet

      title Ubuntu 9.04, kernel 2.6.27-11-generic (recovery mode)
      uuid 7f320b60-ca9a-4cce-b651-9d063fe9a7da
      kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=7f320b60-ca9a-4cce-b651-9d063fe9a7da ro single
      initrd /boot/initrd.img-2.6.27-11-generic

      title Ubuntu 9.04, memtest86+
      uuid 7f320b60-ca9a-4cce-b651-9d063fe9a7da
      kernel /boot/memtest86+.bin
      quiet

      ### END DEBIAN AUTOMAGIC KERNELS LIST

      # This is a divider, added to separate the menu items below from the Debian
      # ones.
      title Other operating systems:
      root

      # This entry automatically added by the Debian installer for a non-linux OS
      # on /dev/sda2
      title Microsoft Windows XP �dition familiale
      root (hd0,1)
      savedefault
      makeactive
      chainloader +1
      1. Contributeur
        bonjour,
        donne nous le resultat de
        cat /etc/fstab
        cat /boot/grub/menu.lst
        et je t'explique le pourquoi du comment
        a+
        1. Merci beaucoup....

          Par contre je ne sais pas quoi modifier lorsque tu dis:
          "Pour rendre cette partition accessible, il sera peut être nécéssaire de modifier le fichier /etc/fstab.
          Il faut aussi penser à modifier /boot/grub/menu.lst si l'OS Windows y est déclaré. "
          1. Contributeur
            re,
            pour info
            Attention : il faut démonter la partition avant de la modifier, 

            si elle ne l'est pas l'option formater est grisée ...

            a+
            1. Bonjour,

              Sous Ubuntu/Debian, il faut aller dans le menu "Système - Administration - Partition editor"

              Attention : il faut démonter la partition avant de la modifier, et il faut sauvegarder/écrire les modifications à la fin.

              Pour rendre cette partition accessible, il sera peut être nécéssaire de modifier le fichier /etc/fstab.
              Il faut aussi penser à modifier /boot/grub/menu.lst si l'OS Windows y est déclaré.

              Cordialement,
              1. Contributeur
                bonjour,
                sous linux , tu ouvres gparted et tu formates la partition
                a+
                1. généralement les linuxiens utilise gparted live cd qui et un cd a booter et qui permer de faire que que tu désir avec tes partitions crée surprimé formaté