Barette à 2 vitesses

Marc-Aurèle Messages postés 2 Date d'inscription   Statut Membre Dernière intervention   -  
Claude Lachance Messages postés 33456 Date d'inscription   Statut Contributeur Dernière intervention   -
Bonjour,
J'aie ajouté une barette de 512mo au 256 que j'avais mais au total info système me donne 512mo
mais dans le bios j'ai perfomance totale du chipset 512mo avec configuration ; 3-3-3-6 à 133mhz
la512 est à3-3-36 mais la256 a 2 configuration 2-2-2-5 et 3-2-2-5 à 100mhz
comment corriger le problème. Je vous remerçi e et suis attentif à vos conseils bonsoir
Configuration: Windows Me!cartemère Gigabyte 6wmmc7

chipset Intel Hub interface       CPU; Intel Celeron 700mhz ;mémoire système 512mo
bios; Award Modular 
dimm 1;  Kingsto 32mx64 PC10  256mo pc100 sdram   CONFIG À 3-2-2-5 à 100mhz  et 2-2-2-5à 100mhz

dimm 2; Apacer tech.  512mo PC133sdram config. 3-3-36 à 133mhz

j'aimerais savoir comment  résoudre le problème et  avoir 768 mo car je veux installer  window XP  CPU-Z et Everest me donnent le même résultat

merçi pour vos conseils Bonsoir à tous
Internet Explorer 6.0
A voir également:

1 réponse

Claude Lachance Messages postés 33456 Date d'inscription   Statut Contributeur Dernière intervention   1 035
 
Salut

Selon Gibabyte, ta carte ne supporte pas plus de 512 mo:
   1. 32MB to 512MB DRAM size
   2. 2 x 3.3V DIMM Sockets
   3. Supports 16/32/64/128/256 MB SDRAM DIMM Module 

https://www.gigabyte.com/tw

Ton manuel confirme :
3.4. DRAM INSTALLATION 
The main board can be installed with 16 / 32 / 64 / 128 / 256 MB 168 pins DIMM 
module DRAM, and the DRAM speed must  100 MHz for SDRAM when system 
bus speed is set to 66, 100MHz or 133MHz, the DRAM memory system on 
main board consists of bank 0 and bank 1. 
Since 168 pins DIMM module is 64 bits width, therefore 1 piece of DIMM 
module may match a 64 bits system. The total memory size is 16 MB ~ 512MB 
SDRAM . The DRAM installation position refer to Figure 3.1, and notice the Pin 
1 of DIMM module must match with the Pin 1 of DIMM socket. Insert the DIMM 
module into the DIMM socket at Vertical angle.  If there is a wrong direction of 
Pin 1, the SDRAM DIMM module could not be inserted into socket completely.  

https://www.gigabyte.com/tw

Désolé !
Ciao !

0