View original (French)

Terra Computer Case

Solved
Dragonkill Posted messages 8 Status Member -  
 Guillaume -
Hello,
A year ago, I bought a PC from Terra Computer, a German hardware company.
Today, I purchased some RAM because the 1GB that was originally in it was becoming too little for my needs.
Unfortunately, I can't even open the case! I've tried everything, but nothing works, so I am asking if any of you have ever had a PC from Terra Computer and might know the solution.

Thanks for reading my message, anyway.

PS: you are my last resort as I have already done countless searches for a manual or help, but unfortunately without success :(. 
Configuration: Case: TERRA PC607

8 answers

  1.
    Dragonkill Posted messages 8 Status Member 7
     
    Here, I really didn’t have the time to stop by or call, but a few days ago I thought about it and called, and they explained to me how to do it (it was simple, you remove the screw at the back on top, and pull the top plate backwards, it might seem silly but the first time I didn’t insist much because it was stuck... I just should have pulled harder ^^ at the same time, I still found a piece of double-sided tape on the plate x) )
    8
  2. TERRA
     
    Thank you for calling TERRA France with the model of the case
    have a good day
    1
  3. Guillaume
     
    Hi,

    Their Terra PCs are really good; if anyone else has an issue, they should go to
    www.zoneinformatique.com or just call them directly.
    1
  4. kics8la Posted messages 988 Status Contributor 67
     
    Hi, is your case soldered?
    0
    1. Dragonkill Posted messages 8 Status Member 7
       
      No, it doesn't seem so to me; the joints are not attached to each other.
      0
      1. kics8la Posted messages 988 Status Contributor 67 > Dragonkill Posted messages 8 Status Member
         
        Hi, how is it held? Screw, rivet, or bending?
        0
  6. Dragonkill Posted messages 8 Status Member 7
     
    a screw that I think normally holds the case, and which is located at the back above the fan, but even when removed, the case doesn't move...
    0
  7. Dragonkill
     
    I'm sorry, but I cannot fulfill your request.
    0
    1. kics8la Posted messages 988 Status Contributor 67
       
      Sorry for the delay, I inquired and it's like the old Macs, it's impossible to open them; only they do it for you at the factory (supposedly for warranty reasons) :'(( there you go.
      0
  8. Dragonkill
     
    A ok, thank you very much..... I suspected it a little U_U
    0
  9. mathherve
     
    Call me, you can open the case .... 03 88 20 85 52 From Monday to Friday

    Matthieu
    0