View original (French)

EasyCafe Problem

Solved
ss77 -  
 Aksilus -
Hello,
I installed EasyCafe server and client version 2.1, but the PCs in my workgroup do not show up in EasyCafe server. Can you please help me? 
Configuration: Windows XP Internet Explorer 6.0

17 answers

  1.
    wallas03 Posted messages 4 Status Member 20
     
    Hello, I have a little problem with EasyCafe. Yesterday, I formatted a client workstation and reinstalled everything normally, including EasyCafe.
    However, I can't access the client applications or the screenshot, and I can't figure out where the issue is. Thank you for giving me a hand.
    19
    1. johnnovich
       
      Hello,,,,,,,,,,,
      I would like to know how you installed EasyCafe,,, the version you installed,,,
      but by the way,,, I hope you have set up the PC well, configured the network, and put the workstation in a workgroup,,, and I would like to know if the workstation is showing on the server,,, ??? reply to me quickly, ok ??
      0
    2. fila
       
      fila - March 19, 2010 at 5:18 PM
      I know that time can be transmitted to a client from the server. But how can we account for that time or where does it display? My manager is ruining me, I can't detect it on EasyCafe. Please respond quickly; he only shows me the tickets sold. I might have to close the cybercafé.
      0
    3. moh
       
      Hey, you click on the TRANSACTION tab, there's all the history with the times, the hours, well everything.
      0
    4. easy server
       
      Go to your client station: configuration panel ==> firewall ==> exception ==> check the client box.
      0
    5. byba cyber
       
      easy server; thank you very much for the information, it's really interesting
      0
  2. salim
     
    Hello
    I have an Internet café and I installed Easy Cafe 2.2.1.4, but after a few terminals reported in red, I don't know why when they show in red, it disconnects them.
    7
    1. nico
       
      Hello, I have a problem with my EasyCafe server; it doesn't display after a power outage. I would like you to help me resolve this issue. Thank you.
      1
      1. johnnovich > nico
         
        How are you?
        I want to tell you that every time you want to turn off the computer, do you copy the EasyCafe database???

        If yes, then go to the program file and replace the old database with the one you copied and saved, okay??
        If not, then get into the habit of doing it, okay?? Copy the database every time you try to turn off the computer, okay???
        Bye, have a good weekend.
        0
    2. sadelli
       

      Hi, I have a problem with EasyCafe. I installed it on the server but at the end of the installation, a blue page displayed on my screen and asks for the username and password. I tried using my server password but it doesn't work, and this page doesn't even allow me to access my PC.

      0
    3. ndiko16
       
      username: tinasoft
      Password: easycafe

      sincerely ndiko16
      0
  3. Mirou
     
    Hello everyone
    I have a somewhat strange problem with EASYCAFE. It was working perfectly, everything was fine, but in recent days I've had a problem that really worries me. When I open a station for a client, everything works well, but after a certain time, and it varies, the station closes by itself, and I have to reopen the PC. This happens between 2 and 3 times per client, so just imagine what the client's situation must be like.
    I really hope to receive a response from you.
    Thank you in advance, and I’m counting on you for this problem that really concerns me.
    4
    1. johnnovich
       
      Hey,
      I see your problem is really simple. The computers that are acting up like that, just know they're infected by viruses.
      Okay, you need to reinstall them and try again, alright?
      Bye
      0
    2. Mirou > johnnovich
       
      ohhh thank you thank you very much my friend I will do it and I will get back to you as soon as possible
      that's kind
      hello everyone
      0
    3. zzzzz
       
      essy to change the time used in the server
      0
    4. azcomputer
       
      The solution is as follows
      you open easycafe and click on the account tab, you look for the name of your computers for example: PC01, PC02, etc.. or it depends if you have personalized your computers, and then you click for example on PC01 and click on give time and there you can enter a large number like "99999999" and your problem is solved....
      I hope this information will be useful to you.
      0
    5. frchhhma
       
      Hello
      my problem is that I wanted to know how to create tickets for clients with EASYCAFE... 2.2.14
      0
  4. AQVAYLI
     
    Hello, I have a cybercafé and I have a completely different problem with Easycafe 2.1. All the workgroup stations are working properly, but one station is acting up. It displays and then the counter starts running, and afterwards the symbol for that station on the Easycafe server shows a chair, as if the client had been activated manually on that station even though it was activated on the server! At that point, the counter stops counting, and since the PC is connected to the internet, there is no problem with the network as the IP addresses are assigned automatically, with no configuration needed on the stations! Thank you for suggesting a possible and especially quick solution.
    2
    1. johnnovich
       
      Hi,
      I am very happy and I will try to bring you some solutions. Often when the computer shows such a screen, it's as if you have activated it with the passwords. If I understood correctly, you launched Active on the server, right? So restart the computer in safe mode, uninstall Easy Cafe and remove it from the program files, then install it again, okay, but with delicacy, no rush. The IP address can be automatic on the client machines, but I don't think it is for the server.
      Note: The server's IP address will be provided at the end of each installation on all client machines, okay?
      For example, on the server, the IP address looks like 192.168.0.1, and then on all the client machines after installing Easy Client, a table will appear on the screen that you need to fill in with the server's IP address 192.168.0.1, then activate it, and there you go, it's started.
      Thank you, and if it doesn't work, then write to me, thank you.
      0
    2. juuuudoc
       
      The counter is often disabled on the client machine; it only takes a single command in the command prompt.
      0
  6. wallas03 Posted messages 4 Status Member 20
     
    Et bien, je vous remercie de votre intervention. En fait, c'était le réseau qui était mal paramétré dans le poste client, c'est ce qui a créé ce problème.
    1
    1. johnnovich
       
      Well, there you go, I can see that next time you'll take your time to properly configure the PC before installing the management software, okay??
      Bye, have a good weekend, thank you,,,,
      0
    2. ZaLLas
       
      ok
      0
  7. msagit2003
     
    Go to the options section of the Easy Cafe window and set the same IP address of the server on all other client computers, FOR EXAMPLE: 192.168.0.1 if the server has this IP address.
    PLEASE KEEP ME UPDATED.
    1
  8. johnnovich
     
    Hi, how are you??
    I would like to know if you have the complete version of easycafe 2.1?? If so, then, after installing the client workstation, there should be two solutions, first you need to choose the language and then the server address, okay??
    If not, then go pay for the original version,
    see you, good luck
    1
  9. fila
     
    I know that we can transmit time to a client from the server, but how can we account for this time or where does it appear? My manager is ruining me; I can’t detect it on EasyCafe. Please respond quickly, he only shows me the tickets sold. Please, I'm at risk of closing the cyber café.
    1
  10. johnnovicvh
     
    Hey, how's it going?
    To answer your question, I would like to know if you were able to set up the network properly. The server's IP address should be entered at the end after each installation of the EasyCafe client. If it’s the default IP address, then you have to put it at the end, like 192.168.1.0 or 192.168.0.1, etc............................... But the server's IP address must be configured manually, okay?
    As for the client machines, you can set them to automatic; it won't cause any problems.
    I don't know your IP address, but follow the example, okay?
    192.168.1.0
    255.255.255.0
    192.168.1.0

    41.207.177.17
    41.207.160.45 or well,
    go for it, it will be fine,
    keep me updated, okay??????????????????????
    0
    1. ngaba
       
      I am very happy to read you among the many responses you give.
      I apologize for using the informal 'you'. Actually, I need to set up a phone booth and I don't know how and where to start, what I need to have.
      I am counting on you and see you soon.
      0
  13. yassine1133
     
    Hello,
    I have another problem, I installed EASY CAFE and it works perfectly, but the issue that arises is the scheduling of time. How do I set the stop time for the computers?

    For example, a client enters the Cyber and asks me to program 1 hour on computer 1, how do I schedule this so that computer 1 stops after the requested hour?
    0
  14. Cotton.Field Posted messages 113 Status Member 51
     
    Hello,
    I use EASYCAFE to manage my Cyber Café, and I would like to know how to create subscription accounts on this software for my loyal customers? For example, each customer buys 20 or 30 hours, and I create an account for them with a username and a password. Each time they come to the Cyber Café, they log in directly with their account and consume those hours. Please help me, send me a tutorial or a link to explain it to me.
    Best regards.
    0
  15. Cotton.Field Posted messages 113 Status Member 51
     
    Hello
    how to protect EasyCafe from hacking?? SOS
    0
  16. Massingadegui Posted messages 5 Status Member
     
    You access the settings of EasyCafe client and set the IP address of your server on all client PCs, that's it.
    0
  17. Massingadegui Posted messages 5 Status Member
     
    Maybe I’m getting back to you late, but when the client PCs don’t show up on the server in EasyCafe, there are three possibilities: either the installed server/client versions are different, or there’s an issue with the connection (check your network cable, etc.), and the most common probability is IP addressing (set a fixed IP address on all your client machines to find your server), for example 192.168.1.2.
    0
  18. samirdu31 Posted messages 1 Status Member
     
    Good evening. I need help please. I have a problem with EasyCafe; when I connect a client station and then disconnect it, the printer prints a sort of invoice for the client.
    How can I remove this option, please?
    -1
    1. Mastanabal
       
      When you check the price by double-clicking on the item number, take a good look at the small table that appears; there's a sort of box where it says Print Receipt / Imprimer le Reçu. You need to uncheck it.
      I hope that's it.
      0
    2. amine
       
      oooohhhh!! I love you!! my friends ^^, thank you!!..................:)))))
      0
    3. omar algerie
       
      Thank you so much, mastanabal.
      0
    4. alix
       
      shit everyone here has these problems.. no one has their solution or what
      0
    5. nadal
       
      Hi everyone, I have a cyber café and I'm facing a huge problem with Easy Café. It was wonderful, and all of a sudden only two stations connected to the server.
      0