Universal remote code for Peekton DVD
Sandie
-
sandie -
sandie -
Hello,
I'm looking for a code to activate my new OneForAll UR7730 universal remote so that it works with a Peekton 6006 DVD player.
However, the manufacturer states that its remotes work with all brands... but does not provide a code for Peekton...
Thank you in advance.
I'm looking for a code to activate my new OneForAll UR7730 universal remote so that it works with a Peekton 6006 DVD player.
However, the manufacturer states that its remotes work with all brands... but does not provide a code for Peekton...
Thank you in advance.
2 réponses
Hello,
In the manual, there is one (or two) method(s) to search for the code.
If it yields nothing, go here http://www.oneforall-int.com/?pag=86 and ask them the question.
--
To err is human, to persist is diabolical.
In the manual, there is one (or two) method(s) to search for the code.
If it yields nothing, go here http://www.oneforall-int.com/?pag=86 and ask them the question.
--
To err is human, to persist is diabolical.
Yes, despite searching for the codes, it doesn't work. I emailed them this morning, and here is the response... it might always be useful to others:
We do not yet have a programming code for your device; to assist you in operating your device, we would like to create a new code.
In order to do this, we need to know the signals coming from your original remote control. If you wish, you can send your original remote control to One For All and our technical department will capture the signals to create a new code for your device.
At that point, One For All will cover all the development costs of this code (including the postage costs to return your remote control to you). This procedure will take approximately 3 weeks, and when the code is ready, we will contact you again.
Even if your original remote control does not work completely, it is sometimes possible to read the outgoing IR signals from the remote if our technical service succeeds in getting it to work enough to create a new code. To proceed with this, please send us your original remote control to the address below along with a letter containing the following information:
- Your name, complete address, and your daytime phone number
- URC model of your ONE FOR ALL remote control
- The complete list of codes you use on your ONE FOR ALL
- The brand and model of the devices for which you do not yet have a code
- A copy of the device's manual (preferably in English)
- If you are unable to send us the manual, can you send us a copy of the technical data sheet of the remote control with the explanation of its buttons as found in your device's manual.
Our address in France is as follows:
One For All France S.A.S.
17 Rue Paul Seramy
77300 FONTAINEBLEAU CEDEX
Our address in Belgium is as follows:
LUCODEX
Hoek 76 (unit 58)
2850 BOOM
Our address in Luxembourg is as follows:
LUCODEX
Hoek 76 (unit 58)
2850 BOOM
Our address in Switzerland is as follows:
ONE FOR All
Postfach 43
CH-3256 DIETERSWIL
Please also mention that this remote should be addressed to the attention of Marleen Walhof in the Netherlands. You will be kept informed as soon as the code is created and known.
Whether or not you are able to send us your original remote control, this correspondence will still be retained to contact you as soon as a code is created.
Thank you in advance for your cooperation if you decide to send us your original remote control for the creation of a new code. We would be very grateful as we will then be able to assist customers who have the same device as yours in the future.
Sincerely,
Romain Gros
Customer Care Center
www.OneforAll.com
We do not yet have a programming code for your device; to assist you in operating your device, we would like to create a new code.
In order to do this, we need to know the signals coming from your original remote control. If you wish, you can send your original remote control to One For All and our technical department will capture the signals to create a new code for your device.
At that point, One For All will cover all the development costs of this code (including the postage costs to return your remote control to you). This procedure will take approximately 3 weeks, and when the code is ready, we will contact you again.
Even if your original remote control does not work completely, it is sometimes possible to read the outgoing IR signals from the remote if our technical service succeeds in getting it to work enough to create a new code. To proceed with this, please send us your original remote control to the address below along with a letter containing the following information:
- Your name, complete address, and your daytime phone number
- URC model of your ONE FOR ALL remote control
- The complete list of codes you use on your ONE FOR ALL
- The brand and model of the devices for which you do not yet have a code
- A copy of the device's manual (preferably in English)
- If you are unable to send us the manual, can you send us a copy of the technical data sheet of the remote control with the explanation of its buttons as found in your device's manual.
Our address in France is as follows:
One For All France S.A.S.
17 Rue Paul Seramy
77300 FONTAINEBLEAU CEDEX
Our address in Belgium is as follows:
LUCODEX
Hoek 76 (unit 58)
2850 BOOM
Our address in Luxembourg is as follows:
LUCODEX
Hoek 76 (unit 58)
2850 BOOM
Our address in Switzerland is as follows:
ONE FOR All
Postfach 43
CH-3256 DIETERSWIL
Please also mention that this remote should be addressed to the attention of Marleen Walhof in the Netherlands. You will be kept informed as soon as the code is created and known.
Whether or not you are able to send us your original remote control, this correspondence will still be retained to contact you as soon as a code is created.
Thank you in advance for your cooperation if you decide to send us your original remote control for the creation of a new code. We would be very grateful as we will then be able to assist customers who have the same device as yours in the future.
Sincerely,
Romain Gros
Customer Care Center
www.OneforAll.com