Ink reservoir full method IP1500
Solved
alain
-
Stan -
Stan -
Hello,
The waste ink tank is full. Method found online
Canon PIXMA IP1000, IP 1500
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Turn off the printer. And disconnect the printer cable. (unplug the 220 V!)
and plug it back in while holding the button!
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button, the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
Step 2: Software for Permanent
1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode Please use software for permanent reset"
The waste ink tank is full. Method found online
Canon PIXMA IP1000, IP 1500
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Turn off the printer. And disconnect the printer cable. (unplug the 220 V!)
and plug it back in while holding the button!
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button, the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
Step 2: Software for Permanent
1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode Please use software for permanent reset"
Configuration: Windows XP Internet Explorer 6.0
10 answers
1. Press POWER, hold it down, unplug the power cable, plug the cable back in while holding POWER, the LED should be green.
2. While still holding it down, press the adjacent button (RESUME) and release, the LED should turn orange.
3. While holding POWER down, press the RESUME button once more and release, the LED should turn green.
4. Release both buttons at the same time.
A new printer with the counter reset to zero will be created.
5. Go to Settings > Control Panel > Printers and Faxes and choose the newly created printer as the default printer by right-clicking.
Eat before it cools down.
2. While still holding it down, press the adjacent button (RESUME) and release, the LED should turn orange.
3. While holding POWER down, press the RESUME button once more and release, the LED should turn green.
4. Release both buttons at the same time.
A new printer with the counter reset to zero will be created.
5. Go to Settings > Control Panel > Printers and Faxes and choose the newly created printer as the default printer by right-clicking.
Eat before it cools down.
attention! il faut faire la dexieme etape )Software for Permanant)
voila le lien http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
puis aprés le telechargement
1. Éteignez l'imprimante. Et déconnectez le câble d'imprimante. (débranchez le 220 V !
et rebranchez-le avec le bouton appuyé !
2. Appuyez et maintenez enfoncé le bouton POWER, allumez l'imprimante.
3. L'indicateur (L.E.D.) doit être vert.
4. Appuyez et relâchez le bouton RESUME, l'indicateur (L.E.D.) doit être orange.
5. Appuyez et relâchez à nouveau le bouton RESUME, l'indicateur (L.E.D.) doit être vert.
6. Relâchez les deux boutons.
étape 2 : Software for Permanant
1-reconnecter le câble
2-ouvrir le général tool
3-appuyer sur ip1500
4-(SET DESTINATION 1)
5-sélectionner CLEAR WASTE INK COUNTER - MAIN
6-. sélectionner CLEAR WASTE INK COUNTER - PLATE
maintenant le miracle se fait ////j'ai testé cette manip et elle a réussi ====Mortadha -tunisie-el homa-metlaoui-cié selja2
pour toutes vos questions
voila le lien http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
puis aprés le telechargement
1. Éteignez l'imprimante. Et déconnectez le câble d'imprimante. (débranchez le 220 V !
et rebranchez-le avec le bouton appuyé !
2. Appuyez et maintenez enfoncé le bouton POWER, allumez l'imprimante.
3. L'indicateur (L.E.D.) doit être vert.
4. Appuyez et relâchez le bouton RESUME, l'indicateur (L.E.D.) doit être orange.
5. Appuyez et relâchez à nouveau le bouton RESUME, l'indicateur (L.E.D.) doit être vert.
6. Relâchez les deux boutons.
étape 2 : Software for Permanant
1-reconnecter le câble
2-ouvrir le général tool
3-appuyer sur ip1500
4-(SET DESTINATION 1)
5-sélectionner CLEAR WASTE INK COUNTER - MAIN
6-. sélectionner CLEAR WASTE INK COUNTER - PLATE
maintenant le miracle se fait ////j'ai testé cette manip et elle a réussi ====Mortadha -tunisie-el homa-metlaoui-cié selja2
pour toutes vos questions
Hello; I was delighted to find this post, but step 2 is a bit complicated!
1-reconnect the cable
2-open the general tool --> what is the general tool
3-press on ip1500
4-(SET DESTINATION 1) --> where can I find this option?
5-select CLEAR WASTE INK COUNTER - MAIN --> same for this option and the next one
6-. select CLEAR WASTE INK COUNTER - PLATE
now the miracle happens //// I tested this method and it worked ====Mortadha
you would do me a great service! I have to submit a lot of registration files this week.
1-reconnect the cable
2-open the general tool --> what is the general tool
3-press on ip1500
4-(SET DESTINATION 1) --> where can I find this option?
5-select CLEAR WASTE INK COUNTER - MAIN --> same for this option and the next one
6-. select CLEAR WASTE INK COUNTER - PLATE
now the miracle happens //// I tested this method and it worked ====Mortadha
you would do me a great service! I have to submit a lot of registration files this week.
Hello,
I have the same "reservoir full" problem with my CANON IP1000 printer.
I applied the first step of the solution you proposed and the error message disappeared, and the printer worked properly, but once I restart the printer the error message reappears and the printer gets stuck again.
From what I understood from the proposed solution, I need to execute the second step to resolve the problem permanently, but I can't find the "General Tools Software" and "Set Destination."
I kindly ask you to give us more explanation about the second step.
Thank you.
I have the same "reservoir full" problem with my CANON IP1000 printer.
I applied the first step of the solution you proposed and the error message disappeared, and the printer worked properly, but once I restart the printer the error message reappears and the printer gets stuck again.
From what I understood from the proposed solution, I need to execute the second step to resolve the problem permanently, but I can't find the "General Tools Software" and "Set Destination."
I kindly ask you to give us more explanation about the second step.
Thank you.
There is no detection of the used ink reservoir,
there is a counter that increments each time you perform a cleaning,
Apply the following procedure to reset the printer:
Unplug the power cable, press and hold the power button, reconnect the power plug and at the same time, press the resume button twice and then release the power button, the printer will then be reinitialized and you can print.
there is a counter that increments each time you perform a cleaning,
Apply the following procedure to reset the printer:
Unplug the power cable, press and hold the power button, reconnect the power plug and at the same time, press the resume button twice and then release the power button, the printer will then be reinitialized and you can print.
julesarc,
on Sunday, March 2, 2008 at 12:46:52 There is no detection of used ink tank,
there is a counter that increments every time you perform a cleaning,
Apply the following procedure to reset the printer:
Unplug the power cable, press and hold the power button, plug the power cord back in, and at the same time, press the resume button twice then release the power button, the printer will then be reinitialized and you can print.
Thank you, dear friend. You are a genius, because of your help I found the solution for my Canon iP 1000 printer. Ink full
Thank you + 1000 times.
on Sunday, March 2, 2008 at 12:46:52 There is no detection of used ink tank,
there is a counter that increments every time you perform a cleaning,
Apply the following procedure to reset the printer:
Unplug the power cable, press and hold the power button, plug the power cord back in, and at the same time, press the resume button twice then release the power button, the printer will then be reinitialized and you can print.
Thank you, dear friend. You are a genius, because of your help I found the solution for my Canon iP 1000 printer. Ink full
Thank you + 1000 times.
After the written procedures:
you also need to download the log "generaltool"
address where I found it: http://imprimante-en-question.blogspot.com/...
French procedure address: https://fr.answers.yahoo.com/question/index?qid=20071208110540AAwGvm7
you also need to download the log "generaltool"
address where I found it: http://imprimante-en-question.blogspot.com/...
French procedure address: https://fr.answers.yahoo.com/question/index?qid=20071208110540AAwGvm7
Is there anyone who can help me? I applied the first step to reset the ink tank, but I didn't understand what the general tools software is. Thank you.
Fortunately, there are people like you who share useful information on the internet
after I called customer service: I couldn't get any useful information except: it's too complicated to take apart, you can change printers
Pleasant to see: and especially less polluting than Canon solutions!!!
Thank you a thousand times