View original (French)

Bus column defect on URMET intercom

Kikinini38 Posted messages 1 Status Member -  
georges97 Posted messages 14641 Registration date   Status Contributor Last intervention   -

Hello,

We have an URMET intercom that is triggering an alarm with a beep: COLUMN BUS fault.

It cannot be removed, even if we cut the main electricity; we can still open the door with the badge and the code but cannot call anyone in the building (6 apartments).

What should we do? We have access to all the settings, and we are afraid of performing a factory reset.

Thank you for your help.
Christophe


2 answers

  1.
    madmyke Posted messages 52304 Registration date   Status Moderator Last intervention   12 488
     

    Hello
    This is more of a case for our other forum that you can use with the same credentials as CCM. https://bricolage.linternaute.com/forum/
    When creating your request, please always make sure to mention as much information as possible, such as the exact model, 2 wires or 5 wires, etc.

    Good luck.

    Best regards

    0
  2. georges97 Posted messages 14641 Registration date   Status Contributor Last intervention   2 952
     

    Hello,

    CCM, a forum dedicated to computing and new technologies, from hardware troubleshooting to assistance or help with software usage.

    You can ask this question using the same username/password at:

    https://bricolage.linternaute.com/forum/motorisation-volets-portails-113

    or:

    https://bricolage.linternaute.com/forum/electronique-15

    0
    1. madmyke Posted messages 52304 Registration date   Status Moderator Last intervention   12 488
       

      (I restored your message because it provides additional information to my simple suggestion, so it might as well benefit from it :-) Have a nice day).

      0
      1. georges97 Posted messages 14641 Registration date   Status Contributor Last intervention   2 952 > madmyke Posted messages 52304 Registration date   Status Moderator Last intervention  
         

        Hello madmyke,

        Having seen your response after posting, I thought that mine was redundant. I trust your judgment.

        Best regards

        0