View original (French)

Non-RGB Motherboard —> RGB

vico89200 Posted messages 60 Status Membre -  
 Andresito -

Hello, I was wondering if it’s possible to use an adapter to convert a motherboard without an RGB port to RGB?

I don’t know if you understood, but I’m not sure if it’s possible to get an adapter to go from non-RGB to RGB ^^

Thanks ;)

1 réponse

Réponse 1 / 1
H0enheim Posted messages 1458 Registration date   Status Membre Last intervention   467
 

Hello Vico89200,

I see the kind ... but... and there are a lot of buts xD

Check out these articles/links that I'm going to send you at the end
(you can combine several; but you'll understand after seeing them)

The thing is, I don't know if you want RGB (a-RGB) with the strips & or the fans and also if you want to control them remotely (with a remote or button) so with pre-defined RGB.

Here are the links > 1 2 3 4 5
2
H0enheim Posted messages 1458 Registration date   Status Membre Last intervention   467
 

or this link > HERE < all in one

1
vico89200 Posted messages 60 Status Membre 3
 

Hello, I would like to install RGB fans, not necessarily controllable, as I don't have a pin for RGB. Additionally, I was wondering if it’s possible to buy a hub for the fans (not necessarily RGB). If I can control it remotely, that’s fine with me.

Have a good evening.

0
vico89200 Posted messages 60 Status Membre 3
 

Rather the second link ^^

0
H0enheim Posted messages 1458 Registration date   Status Membre Last intervention   467 > vico89200 Posted messages 60 Status Membre
 

Cool; Have a good evening

0
vico89200 Posted messages 60 Status Membre 3 > H0enheim Posted messages 1458 Registration date   Status Membre Last intervention  
 

But for the fans, I only have one SYS_FAN1. Can I buy an RGB hub adapter? Does it exist?

1