Ubuntu + phph5 et apache2 Résolu/Fermé

Question

Bonjour, 
Apres avoir suivi plusieurs forum sur la toile, j'en perd mon latin :
Voila mon soucis, ubuntu ne veux pas ouvrir les page php, j'ai le msg enregistrer sous ou ouvrir avec....
quand je fais :
dpkg -l | grep apache
En resultat j'ai 
ii  apache                                    1.3.34-4.14.1                                 versatile, high-performance HTTP server
ii  apache-common                              1.3.34-4.1                                 support files for all Apache webservers
ii  apache-ssl                                 1.3.34-4.1                                 versatile, high-performance HTTP server with
ii  apache2                                    2.2.3-3.2ubuntu0.1                         Next generation, scalable, extendable web se
ii  apache2-mpm-prefork                        2.2.3-3.2ubuntu0.1                         Traditional model for Apache HTTPD 2.1
ii  apache2-utils                              2.2.3-3.2ubuntu0.1                         utility programs for webservers
ii  apache2.2-common                           2.2.3-3.2ubuntu0.1                         Next generation, scalable, extendable web se
ii  libapache2-mod-php5                        5.2.1-0ubuntu1.4                           server-side, HTML-embedded scripting languag
Apache  1.3.34-4.1 & apache 22.2.3-3
J'ai bien essayé dans supprimer (apt-get remove/install) 1 mais il appairait toujours et cela pour les 2

dpkg -l | grep php5

ii  libapache2-mod-php5                        5.2.1-0ubuntu1.4                           server-side, HTML-embedded scripting languag
ii  php5                                       5.2.1-0ubuntu1.4                           server-side, HTML-embedded scripting languag
ii  php5-common                                5.2.1-0ubuntu1.4                           Common files for packages built from the php
ii  php5-mysql                                 5.2.1-0ubuntu1.4                           MySQL module for php5
ii  phpmyadmin                                 2.9.1.1-2ubuntu1                           Administrate MySQL over the WWW
donc php5 est ok enfin pour moi, merci d'eclairer les 2 neurone qui me reste

lami20j · Accepted Answer

inquiètes pas

tape sudo /etc/init.d/apache2 startensuiteps aux | grep apache
sudo apache2 -M

lami20j · Answer

Salut,

afficheps aux | grep apache
sudo apache2 -M

joussecy · Answer

Bonjour, 
Merci lami20j, d'eclairer mes neurone (plus 1 maintenant)
La commande ps aux | grep apache repond :

root      5149  0.0  0.5   6524  2864 ?        Ss   15:08   0:00 /usr/sbin/apache-ssl
www-data  5150  0.0  0.2   4856  1056 ?        S    15:08   0:00 /usr/lib/apache-ssl/gcache 33 /var/run/gcache_port
www-data  5153  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5154  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5155  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5156  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5157  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
root     16263  0.0  0.4   4860  2132 ?        Ss   18:17   0:00 /usr/sbin/apache
www-data 16264  0.0  0.2   4860  1356 ?        S    18:17   0:00 /usr/sbin/apache
www-data 16265  0.0  0.2   4860  1236 ?        S    18:17   0:00 /usr/sbin/apache
www-data 16266  0.0  0.1   4860   868 ?        S    18:17   0:00 /usr/sbin/apache
www-data 16267  0.0  0.1   4860   868 ?        S    18:17   0:00 /usr/sbin/apache
www-data 16271  0.0  0.1   4860   868 ?        S    18:17   0:00 /usr/sbin/apache
www-data 16279  0.0  0.1   4860   872 ?        S    18:17   0:00 /usr/sbin/apache
www-data 16280  0.0  0.1   4860   872 ?        S    18:17   0:00 /usr/sbin/apache
www-data 16281  0.0  0.1   4860   872 ?        S    18:17   0:00 /usr/sbin/apache
root     17346  0.0  0.1   2900   764 pts/0    R+   18:49   0:00 grep apache

sudo apache2 -M
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
Loaded Modules:
 core_module (static)
 log_config_module (static)
 logio_module (static)
 mpm_prefork_module (static)
 http_module (static)
 so_module (static)
 alias_module (shared)
 auth_basic_module (shared)
 authn_file_module (shared)
 authz_default_module (shared)
 authz_groupfile_module (shared)
 authz_host_module (shared)
 authz_user_module (shared)
 autoindex_module (shared)
 cgi_module (shared)
 dir_module (shared)
 env_module (shared)
 mime_module (shared)
 negotiation_module (shared)
 php5_module (shared)
 setenvif_module (shared)
 status_module (shared)
Syntax OK

Pourriez vous m'expliquer un peu le but des 2 commandes, je suis completemnt novice sur linux, si cela ne vous derrange pas trop mais si je veux comprendre le pourquoi du comment
Encore merci

lami20j · Answer

Salut,

la 1ère commande nous permets de voir si le server est en marche
on constate bien que le serveur est en marche et aussi que c'est la version 1.3.34 et je ne pense pas que c'est ça que tu veux

la 2ème affiche les modules et on vois bien que php5 existe

affiche maintenant
whereis apache{,2}

joussecy · Answer

bsoir
La commande renvoi 
apache: /usr/sbin/apache /etc/apache /usr/lib/apache /usr/share/apache /usr/share/man/man8/apache.8.gz
apache2: /usr/sbin/apache2 /etc/apache2 /usr/lib/apache2 /usr/share/apache2

quand a la version de apache je m'en moque, le derniere serait mieux mais bon.
L'idee est que je souhaite mettre en place un portail web captif chillispot

lami20j · Answer

alors d'abord on va desinstaller la apache 1.x.x
sudo /etc/init.d/apache stop
sudo aptitude purge apache
ensuite affiche
ls -l /etc/init.d/apa*

joussecy · Answer

Bsoir,
la cmd sudo aptitude purge apache me retourne une erreur "rep non vide (voir ci dessous)"
Purge des fichiers de configuration de apache ...
dpkg : avertissement : lors de la suppression de apache, le répertoire « /etc/apache » n'était pas vide, donc il n'a pas été supprimé.

root@compaq:~# ls -l /etc/init.d/apa*
-rwxr-xr-x 1 root root 4351 2007-08-17 00:45 /etc/init.d/apache2
-rwxr-xr-x 1 root root 2827 2007-03-08 01:07 /etc/init.d/apache-ssl
 je controle le rep pour voir

joussecy · Answer

Le repertoire apache est bien vide pourtant ????
Je ne comprends pas le msg

joussecy · Answer

root@compaq:~# sudo /etc/init.d/apache2 start
 * Starting web server (apache2)...                                             apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
                                                                         [ OK ]


root@compaq:~# ps aux | grep apache
root      5149  0.0  0.5   6524  2864 ?        Ss   15:08   0:00 /usr/sbin/apache-ssl
www-data  5150  0.0  0.2   4856  1056 ?        S    15:08   0:00 /usr/lib/apache-ssl/gcache 33 /var/run/gcache_port
www-data  5153  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5154  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5155  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5156  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
www-data  5157  0.0  0.2   6660  1084 ?        S    15:08   0:00 /usr/sbin/apache-ssl
root     19582  0.1  1.1  20020  6000 ?        Ss   19:47   0:00 /usr/sbin/apache2 -k start
www-data 19586  0.0  0.6  20020  3192 ?        S    19:47   0:00 /usr/sbin/apache2 -k start
www-data 19587  0.0  0.6  20020  3192 ?        S    19:47   0:00 /usr/sbin/apache2 -k start
www-data 19588  0.0  0.6  20020  3192 ?        S    19:47   0:00 /usr/sbin/apache2 -k start
www-data 19589  0.0  0.6  20020  3192 ?        S    19:47   0:00 /usr/sbin/apache2 -k start
www-data 19590  0.0  0.6  20020  3192 ?        S    19:47   0:00 /usr/sbin/apache2 -k start
root     19607  0.0  0.0   1636   188 pts/0    R+   19:47   0:00 grep apache

root@compaq:~# apache2 -M
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
Loaded Modules:
 core_module (static)
 log_config_module (static)
 logio_module (static)
 mpm_prefork_module (static)
 http_module (static)
 so_module (static)
 alias_module (shared)
 auth_basic_module (shared)
 authn_file_module (shared)
 authz_default_module (shared)
 authz_groupfile_module (shared)
 authz_host_module (shared)
 authz_user_module (shared)
 autoindex_module (shared)
 cgi_module (shared)
 dir_module (shared)
 env_module (shared)
 mime_module (shared)
 negotiation_module (shared)
 php5_module (shared)
 setenvif_module (shared)
 status_module (shared)
Syntax OK


Je suis pas inquiet juste mes vielles abitudes de bill gate quand je retire un programme bill vire aussi le rep, voila mon etonnement

lami20j · Answer

ok
maintenant ouvre ton navigateur et tape
http://localhost

affiche aussi sudo apache2 -V

joussecy · Answer

La commande renvoie :

root@compaq:~# apache2 -V
Server version: Apache/2.2.3
Server built:   Aug 16 2007 22:49:04
Server's Module Magic Number: 20051115:3
Server loaded:  APR 1.2.7, APR-Util 1.2.7
Compiled using: APR 1.2.7, APR-Util 1.2.7
Architecture:   32-bit
Server MPM:     Prefork
  threaded:     no
    forked:     yes (variable process count)
Server compiled with....
 -D APACHE_MPM_DIR="server/mpm/prefork"
 -D APR_HAS_SENDFILE
 -D APR_HAS_MMAP
 -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
 -D APR_USE_SYSVSEM_SERIALIZE
 -D APR_USE_PTHREAD_SERIALIZE
 -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
 -D APR_HAS_OTHER_CHILD
 -D AP_HAVE_RELIABLE_PIPED_LOGS
 -D DYNAMIC_MODULE_LIMIT=128
 -D HTTPD_ROOT=""
 -D SUEXEC_BIN="/usr/lib/apache2/suexec"
 -D DEFAULT_PIDLOG="/var/run/apache2.pid"
 -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
 -D DEFAULT_LOCKFILE="/var/run/apache2/accept.lock"
 -D DEFAULT_ERRORLOG="logs/error_log"
 -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types"
 -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf"

Pour le navigateur j'ai :

[DIR]	apache2-default/	20-Nov-2004 21:16 	 -
[DIR]	fpdf152/	12-Dec-2004 07:24 	-
[DIR]	label/	24-Dec-2004 08:25 	-
[DIR]	phpMyPrepaid/	20-Apr-2005 06:22 	-
[DIR]	phpmyadmin/	25-Mar-2007 00:47 	-
 
Apache/2.2.3 (Ubuntu) PHP/5.2.1 Server at localhost Port 80

Lorsque je clic' sur n'importe qu'elle rep le pb reste entier mais la version apache à change.

si j'ai bien compris les cmd :
Apache2 -v affiche la version
apache2 -m affiche les module c'est bien ca ?

lami20j · Answer

C'est le moment de m'afficher maintenant le fichier /etc/apache2/apache2.conf
ainsi que le résultat de
rgrep -Ei 'documentroot|directoryindex' /etc/apache2/

joussecy · Answer

si j'ai bien compris vous attaquez un gros morceau lol Le cmd renvoie : root@compaq:~# rgrep -Ei 'documentroot|directoryindex' /etc/apache2/ /etc/apache2/mods-available/dir.conf: DirectoryIndex index.html index.cgi index.pl index.php index.xhtml /etc/apache2/sites-enabled/000-default: DocumentRoot /var/www/ /etc/apache2/sites-available/default: DocumentRoot /var/www/ /etc/apache2/mods-enabled/dir.conf: DirectoryIndex index.html index.cgi index.pl index.php index.xhtml fichier apache2.conf # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at ); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # # # LockFile /var/lock/apache2/accept.lock # # # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile /var/run/apache2.pid # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 User www-data Group www-data # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Order allow,deny Deny from all TypesConfig /etc/mime.types # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # Include generic snippets of statements Include /etc/apache2/conf.d/ # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/". If the fakename is slash-terminated, then the # realname must also be slash terminated, and if the fakename omits the # trailing slash, the realname must also omit it. # # We include the /icons/ alias for FancyIndexed directory listings. If # you do not use FancyIndexing, you may comment this out. # Alias /icons/ "/usr/share/apache2/icons/" Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all # # Directives controlling the display of server-generated directory listings. # # # IndexOptions: Controls the appearance of server-generated directory # listings. # IndexOptions FancyIndexing VersionSort HTMLTable NameWidth=* # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. ReadmeName README.html HeaderName HEADER.html # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# RCS CVS *,v *,t # # AddType allows you to add to or override the MIME configuration # file mime.types for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have # nothing to do with the FancyIndexing customization directives above. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # DefaultLanguage and AddLanguage allows you to specify the language of # a document. You can then use content negotiation to give a browser a # file in a language the user can understand. # # Specify a default language. This means that all data # going out without a specific language tag (see below) will # be marked with this one. You probably do NOT want to set # this unless you are sure it is correct for all cases. # # * It is generally better to not mark a page as # * being a certain language than marking it with the wrong # * language! # # DefaultLanguage nl # # Note 1: The suffix does not have to be the same as the language # keyword --- those with documents in Polish (whose net-standard # language code is pl) may wish to use "AddLanguage pl .po" to # avoid the ambiguity with the common suffix for perl scripts. # # Note 2: The example entries below illustrate that in some cases # the two character 'Language' abbreviation is not identical to # the two character 'Country' code for its country, # E.g. 'Danmark/dk' versus 'Danish/da'. # # Note 3: In the case of 'ltz' we violate the RFC by using a three char # specifier. There is 'work in progress' to fix this and get # the reference data for rfc1766 cleaned up. # # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) # Norwegian (no) - Polish (pl) - Portugese (pt) # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW) # AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw # # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # # Just list the languages in decreasing order of preference. We have # more or less alphabetized them here. You probably want to change this. # LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW # # ForceLanguagePriority allows you to serve a result page rather than # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) # [in case no accepted languages matched the available variants] # ForceLanguagePriority Prefer Fallback # # Specify a default charset for all pages sent out. This is # always a good idea and opens the door for future internationalisation # of your web site, should you ever want it. Specifying it as # a default does little harm; as the standard dictates that a page # is in iso-8859-1 (latin1) unless specified otherwise i.e. you # are merely stating the obvious. There are also some security # reasons in browsers, related to javascript and URL parsing # which encourage you to always set a default char set. # #AddDefaultCharset ISO-8859-1 # # Commonly used filename extensions to character sets. You probably # want to avoid clashes with the language extensions, unless you # are good at carefully testing your setup after each change. # See https://www.iana.org/assignments/character-sets/character-sets.xhtml for the # official list of charset names and their respective RFCs. # AddCharset us-ascii .ascii .us-ascii AddCharset ISO-8859-1 .iso8859-1 .latin1 AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen AddCharset ISO-8859-3 .iso8859-3 .latin3 AddCharset ISO-8859-4 .iso8859-4 .latin4 AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru AddCharset ISO-8859-6 .iso8859-6 .arb .arabic AddCharset ISO-8859-7 .iso8859-7 .grk .greek AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk AddCharset ISO-8859-10 .iso8859-10 .latin6 AddCharset ISO-8859-13 .iso8859-13 AddCharset ISO-8859-14 .iso8859-14 .latin8 AddCharset ISO-8859-15 .iso8859-15 .latin9 AddCharset ISO-8859-16 .iso8859-16 .latin10 AddCharset ISO-2022-JP .iso2022-jp .jis AddCharset ISO-2022-KR .iso2022-kr .kis AddCharset ISO-2022-CN .iso2022-cn .cis AddCharset Big5 .Big5 .big5 .b5 AddCharset cn-Big5 .cn-big5 # For russian, more than one charset is used (depends on client, mostly): AddCharset WINDOWS-1251 .cp-1251 .win-1251 AddCharset CP866 .cp866 AddCharset KOI8 .koi8 AddCharset KOI8-E .koi8-e AddCharset KOI8-r .koi8-r .koi8-ru AddCharset KOI8-U .koi8-u AddCharset KOI8-ru .koi8-uk .ua AddCharset ISO-10646-UCS-2 .ucs2 AddCharset ISO-10646-UCS-4 .ucs4 AddCharset UTF-7 .utf7 AddCharset UTF-8 .utf8 AddCharset UTF-16 .utf16 AddCharset UTF-16BE .utf16be AddCharset UTF-16LE .utf16le AddCharset UTF-32 .utf32 AddCharset UTF-32BE .utf32be AddCharset UTF-32LE .utf32le AddCharset euc-cn .euc-cn AddCharset euc-gb .euc-gb AddCharset euc-jp .euc-jp AddCharset euc-kr .euc-kr #Not sure how euc-tw got in - IANA doesn't list it??? AddCharset EUC-TW .euc-tw AddCharset gb2312 .gb2312 .gb AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2 AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4 AddCharset shift_jis .shift_jis .sjis # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # # For files that include their own HTTP headers: # #AddHandler send-as-is asis # # For server-parsed imagemap files: # #AddHandler imap-file map # # For type maps (negotiated resources): # (This is enabled by default to allow the Apache "It Worked" page # to be distributed in multiple languages.) # AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # # The following directives modify normal HTTP response behavior to # handle known problems with browser implementations. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # The following directive disables redirects on non-GET requests for # a directory that does not include the trailing slash. This fixes a # problem with Microsoft WebFolders which does not appropriately handle # redirects for folders with DAV methods. # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully # # # Allow server status reports generated by mod_status, # with the URL of http://servername/server-status # Change the ".example.com" to match your domain to enable. # # # SetHandler server-status # Order deny,allow # Deny from all # Allow from .example.com # # # # # Allow remote server configuration reports, with the URL of # http://servername/server-info (requires that mod_info.c be loaded). # Change the ".example.com" to match your domain to enable. # # # SetHandler server-info # Order deny,allow # Deny from all # Allow from .example.com # # # Include the virtual host configurations: Include /etc/apache2/sites-enabled/

lami20j · Answer

tape
sudo echo -e "<?php
phpinfo();
?>
" > /var/www/test2.phpensuite dans ton navigateur
http://localhost/test2.php

joussecy · Answer

Youpi ca marche j'ai un jolie tableau qui s'affiche en revanche quand j'essais phpmyadmin j'ai tjrs le meme pb mais vous m'avez bien fait progresse jusqu ici

lami20j · Answer

ben pour phpmyadmin il faut savoir ce qui ne vas pas
peut être ça sera bien de le réinstaller

avant de faire quoi que ce soit dit moi comment tu l'as installé

lami20j · Answer

fait aussi
sudo >/var/log/apache2/error.log
ensuite lance phpmyadmin comme tu fait d'habitude
et puis affiche
cat /var/log/apache2/error.log

joussecy · Answer

Bonjour, 
en fait j'ai suivi ce tuto :
http://www.gerthoffert.net/wiki/index.php?title=PortailCaptifServeurFreeradius

les composants logiciels ont été intallés de cette facon :

apt-get install mysql-client mysql-server apache apache-ssl php5 phpmyadmin

De + j'ai le meme probleme avec phpmyprepaid qui lui à ete installé de cette facon :

cd /var/www/
 #> wget http://ovh.dl.sourceforge.net/sourceforge/phpmyprepaid/phpMyPrepaid.0.1.3RC1.tar
 #> tar xf phpMyPrepaid.0.1.3RC1.tar
 #> chown www-data * -R
 #> chgrp www-data * -R
 #> cd phpMyPrepaid
 #> echo "create database radius;" | mysql -u root -p
 #> echo "grant all on radius.* to radius@'%' identified by 'motdepasse_sql'; flush privileges;" | mysql -u root -p
 #> mysql -u root -p < ./db_mysql.sql

Le tout fonctionnait tres bien hier j'ai voulu mettre php5 avec apache2 de mon propre chef me prennant deja pour un linuxian veteran

lami20j · Answer

tape
sudo aptitude reinstall phpmyadmin
et essaie
tu ne m'as pas affiché le contenu du /var/log/apache2/error.log

joussecy · Answer

aucune des 2 commandes me renvois qques chose l"ai je bien tapé ???

root@compaq:~# >/var/log/apache2/error.log
root@compaq:~# cat /var/log/apache2/error.log
root@compaq:~#

lami20j · Answer

oui met je t'ai dit de te connecter sur phpmyadmin et ensuite afficher le contenu
comme ça je peut voir les erreurs
regarde
ubuntu phph5 et apache2#17

joussecy · Answer

Bonjour, 
meme pb apres reinstalle.

sur different site j'ai souvant vu la cmd a2enmod quelle est son impacte sur la conf car cette derniere je l'ai utilisé plus que de raison

lami20j · Answer

tu as essayer de te connecter sur ton phpmyadmin?
si oui affiche maintenantcat /var/log/apache2/error.log

joussecy · Answer

Bonjour, 
Dsl mais je viens de le faire dans tous les sens et la seul reponse est sur apache2 le cmd retourne :
root@compaq:~# cat /var/log/apache2/error.log
usage: sudo [-HPSb] [-p prompt] [-u username|#uid]
            { -e file [...] | -i | -s | <command> }
pour phpmyadmin pas de resultat mais pas d'erreur on plus

lami20j · Answer

pour phpmyadmin pas de resultat mais pas d'erreur on plus
je ne comprends pas

root@compaq:~# cat /var/log/apache2/error.log
usage: sudo [-HPSb] [-p prompt] [-u username|#uid]
{ -e file [...] | -i | -s | <command> } 

que fait sudo ici, je vois que tu es en root

affiche le contenu de ce fichier /var/log/apache2/error.log 
n'importe la méthode, mais affiche le

joussecy · Answer

Bonjour, 
je l'affiche bien par la cmd vi  /var/log/apache2/error.log c'est bien ca
Dans ce cas le fichier est vide en fait ca parait normal car quand j'ouvre http://localhost/phpmyadmin il me demande si je veux l'ouvrir avec un choix de programme ou si je veux l'enregistrer sur le disque mais il n'affiche aucune erreur.

Je viens de refaire la manip et le fichier est toujours vide DSL

lami20j · Answer

affiche
ls -l /var/www/

lami20j · Answer

pour ce soir j'arrête

bonne nuit

joussecy · Answer

Bonjour, 
la cmd renvoie :
cyril@compaq:~$ ls -l /var/www/
total 784
drwxr-xr-x 2 www-data www-data   4096 2007-10-02 17:07 apache2-default
drwxr-xr-x 5 www-data www-data   4096 2004-12-12 07:24 fpdf152
drwxr-xr-x 2 www-data www-data   4096 2004-12-24 08:25 label
lrwxrwxrwx 1 www-data www-data     21 2007-10-02 17:09 phpmyadmin -> /usr/share/phpmyadmin
drwxr-xr-x 5 www-data www-data   4096 2007-10-02 18:34 phpMyPrepaid
-rw-r--r-- 1 www-data www-data 778240 2005-04-20 07:24 phpMyPrepaid.0.1.3RC1.tar
-rw-r--r-- 1 root     root         21 2007-10-03 20:48 test2.php

quand à sudo je m'en suis aperçu je viens de repasser en utilisateur mais le pb est tjr le meme.
Petite question les services (peut'etre pas le bon terme sur linux) ne sont ils pas arreté ou ne faudraient ils pas les relancer et toujours avec mes habitude de bill un reboot ????

lami20j · Answer

affiche
ls -l /var/www/phpmyadmin

joussecy · Answer

Je continue encore de mon coté, merci encore à vous je pense deja avoir pas mal progressé, bonne nuit et encore merci de votre patience
Cordialement

joussecy · Answer

Bonjour, 
la cmd renvoie :
cyril@compaq:~$ ls -l /var/www/phpmyadmin
lrwxrwxrwx 1 www-data www-data 21 2007-10-02 17:09 /var/www/phpmyadmin -> /usr/share/phpmyadmin
cyril@compaq:~$

lami20j · Answer

Je continue encore de mon coté, merci encore à vous je pense deja avoir pas mal progressé, bonne nuit et encore merci de votre patience 

pas avant de faire ça :-))
regarde ici  ubuntu phph5 et apache2#30

lami20j · Answer

et ls -l /usr/share/phpmyadmin

joussecy · Answer

Bonjour, 
La cmd renvoie :

cyril@compaq:~$ ls -l /usr/share/phpmyadmin 
total 1404
-rw-r--r--  1 root root  10910 2007-03-25 00:47 browse_foreigners.php
-rw-r--r--  1 root root    711 2007-03-25 00:47 calendar.php
-rw-r--r--  1 root root 202428 2007-03-25 00:47 ChangeLog
-rw-r--r--  1 root root   3466 2007-03-25 00:47 changelog.php
-rw-r--r--  1 root root    445 2007-03-25 00:47 chk_rel.php
drwxr-xr-x  2 root root   4096 2007-10-03 21:07 config
-rw-r--r--  1 root root    186 2007-03-25 00:47 config.footer.inc.php
-rw-r--r--  1 root root    186 2007-03-25 00:47 config.header.inc.php
-rw-r--r--  1 root root   3322 2007-03-25 00:47 config.inc.php
-rw-r--r--  1 root root   1706 2007-03-25 00:47 config.sample.inc.php
drwxr-xr-x  2 root root   4096 2007-10-03 21:07 css
-rw-r--r--  1 root root   1184 2007-03-25 00:47 db_create.php
-rw-r--r--  1 root root  10617 2007-03-25 00:47 db_datadict.php
-rw-r--r--  1 root root   2303 2007-03-25 00:47 db_details_export.php
-rw-r--r--  1 root root  12548 2007-03-25 00:47 db_details_importdocsql.php
-rw-r--r--  1 root root    786 2007-03-25 00:47 db_details.php
-rw-r--r--  1 root root  34537 2007-03-25 00:47 db_details_qbe.php
-rw-r--r--  1 root root  21426 2007-03-25 00:47 db_details_structure.php
-rw-r--r--  1 root root    456 2007-03-25 00:47 db_import.php
-rw-r--r--  1 root root  17662 2007-03-25 00:47 db_operations.php
-rw-r--r--  1 root root   7610 2007-03-25 00:47 db_printview.php
-rw-r--r--  1 root root  11944 2007-03-25 00:47 db_search.php
-rw-r--r--  1 root root   4583 2007-03-25 00:47 docs.css
-rw-r--r--  1 root root 213402 2007-03-25 00:47 Documentation.html
-rw-r--r--  1 root root   1959 2007-03-25 00:47 error.php
-rw-r--r--  1 root root  24647 2007-03-25 00:47 export.php
-rw-r--r--  1 root root  13946 2007-03-25 00:47 import.php
-rw-r--r--  1 root root   6252 2007-03-25 00:47 index.php
-rw-r--r--  1 root root    179 2007-03-25 00:47 INSTALL
drwxr-xr-x  2 root root   4096 2007-10-03 21:07 js
drwxr-xr-x  2 root root  20480 2007-10-03 21:07 lang
-rw-r--r--  1 root root  21040 2007-03-25 00:47 left.php
drwxr-xr-x 11 root root  12288 2007-10-03 21:07 libraries
-rw-r--r--  1 root root    315 2007-03-25 00:47 license.php
-rw-r--r--  1 root root  14304 2007-03-25 00:47 main.php
-rw-r--r--  1 root root  27296 2007-03-25 00:47 pdf_pages.php
-rw-r--r--  1 root root  53341 2007-03-25 00:47 pdf_schema.php
-rw-r--r--  1 root root    341 2007-03-25 00:47 phpinfo.php
-rw-r--r--  1 root root  13951 2007-03-25 00:47 querywindow.php
-rw-r--r--  1 root root   2629 2007-03-25 00:47 README
-rw-r--r--  1 root root    313 2007-03-25 00:47 readme.php
drwxr-xr-x  2 root root   4096 2007-10-03 21:07 scripts
-rw-r--r--  1 root root   3341 2007-03-25 00:47 server_binlog.php
-rw-r--r--  1 root root   2773 2007-03-25 00:47 server_collations.php
-rw-r--r--  1 root root  15982 2007-03-25 00:47 server_databases.php
-rw-r--r--  1 root root   8285 2007-03-25 00:47 server_engines.php
-rw-r--r--  1 root root   1774 2007-03-25 00:47 server_export.php
-rw-r--r--  1 root root    452 2007-03-25 00:47 server_import.php
-rw-r--r--  1 root root 112668 2007-03-25 00:47 server_privileges.php
-rw-r--r--  1 root root   2845 2007-03-25 00:47 server_processlist.php
-rw-r--r--  1 root root    543 2007-03-25 00:47 server_sql.php
-rw-r--r--  1 root root  20286 2007-03-25 00:47 server_status.php
-rw-r--r--  1 root root   2410 2007-03-25 00:47 server_variables.php
-rw-r--r--  1 root root    283 2007-03-25 00:47 show_config_errors.php
-rw-r--r--  1 root root  34885 2007-03-25 00:47 sql.php
-rw-r--r--  1 root root   9159 2007-03-25 00:47 tbl_addfield.php
-rw-r--r--  1 root root   9511 2007-03-25 00:47 tbl_alter.php
-rw-r--r--  1 root root  45723 2007-03-25 00:47 tbl_change.php
-rw-r--r--  1 root root   8682 2007-03-25 00:47 tbl_create.php
-rw-r--r--  1 root root    640 2007-03-25 00:47 tbl_import.php
-rw-r--r--  1 root root  16568 2007-03-25 00:47 tbl_indexes.php
-rw-r--r--  1 root root   2102 2007-03-25 00:47 tbl_move_copy.php
-rw-r--r--  1 root root  18325 2007-03-25 00:47 tbl_printview.php
-rw-r--r--  1 root root   3925 2007-03-25 00:47 tbl_properties_export.php
-rw-r--r--  1 root root  19869 2007-03-25 00:47 tbl_properties_operations.php
-rw-r--r--  1 root root    811 2007-03-25 00:47 tbl_properties.php
-rw-r--r--  1 root root  33635 2007-03-25 00:47 tbl_properties_structure.php
-rw-r--r--  1 root root  23600 2007-03-25 00:47 tbl_relation.php
-rw-r--r--  1 root root  11904 2007-03-25 00:47 tbl_replace.php
-rw-r--r--  1 root root   4659 2007-03-25 00:47 tbl_row_action.php
-rw-r--r--  1 root root  17111 2007-03-25 00:47 tbl_select.php
drwxr-xr-x  4 root root   4096 2007-10-02 17:07 themes
-rw-r--r--  1 root root    974 2007-03-25 00:47 themes.php
-rw-r--r--  1 root root   1727 2007-03-25 00:47 transformation_overview.php
-rw-r--r--  1 root root   4049 2007-03-25 00:47 transformation_wrapper.php
-rw-r--r--  1 root root   8127 2007-03-25 00:47 translators.html
-rw-r--r--  1 root root   5712 2007-03-25 00:47 user_password.php

joussecy · Answer

Bonjour, 
Dsl mais je viens de le faire dans tous les sens et la seul reponse est sur apache2 le cmd retourne :
root@compaq:~# cat /var/log/apache2/error.log
usage: sudo [-HPSb] [-p prompt] [-u username|#uid]
            { -e file [...] | -i | -s | <command> }
pour phpmyadmin pas de resultat mais pas d'erreur on plus

lami20j · Answer

alors tu as un p'tit problème
je viens d'installer phpmyadmin et j'ai ça

lami20j@debian:~$ ls /var/www/phpmyadmin
browse_foreigners.php        db_details_qbe.php        libraries              server_privileges.php      tbl_properties_operations.php
calendar.php                 db_details_structure.php  license.php            server_processlist.php     tbl_properties.php
ChangeLog                    db_import.php             main.php               server_sql.php             tbl_properties_structure.php
changelog.php                db_operations.php         pdf_pages.php          server_status.php          tbl_relation.php
chk_rel.php                  db_printview.php          pdf_schema.php         server_variables.php       tbl_replace.php
config                       db_search.php             phpinfo.php            show_config_errors.php     tbl_row_action.php
config.footer.inc.php        docs.css                  querywindow.php        sql.php                    tbl_select.php
config.header.inc.php        Documentation.html        README                 tbl_addfield.php           themes
config.inc.php               error.php                 readme.php             tbl_alter.php              themes.php
config.sample.inc.php        export.php                scripts                tbl_change.php             transformation_overview.php
css                          import.php                server_binlog.php      tbl_create.php             transformation_wrapper.php
db_create.php                index.php                 server_collations.php  tbl_import.php             translators.html
db_datadict.php              INSTALL                   server_databases.php   tbl_indexes.php            user_password.php
db_details_export.php        js                        server_engines.php     tbl_move_copy.php
db_details_importdocsql.php  lang                      server_export.php      tbl_printview.php
db_details.php               left.php                  server_import.php      tbl_properties_export.php
lami20j@debian:~$ ls -ld /var/www/phpmyadmin
lrwxrwxrwx 1 root root 21 2007-10-03 21:49 /var/www/phpmyadmin -> /usr/share/phpmyadmin
lami20j@debian:~$

chez toi je vois

cyril@compaq:~$ ls -l /var/www/phpmyadmin
lrwxrwxrwx 1 www-data www-data 21 2007-10-02 17:09 /var/www/phpmyadmin -> /usr/share/phpmyadmin 

quand tu est ici root@compaq:~# 

affiche
pwd
whoami

joussecy · Answer

Bonjour, 
cyril@compaq:~$ pwd
/home/cyril
cyril@compaq:~$ whoami
cyril
cyril@compaq:~$ 

root@compaq:~# ls -l /var/www/phpmyadmin
lrwxrwxrwx 1 www-data www-data 21 2007-10-02 17:09 /var/www/phpmyadmin -> /usr/share/phpmyadmin
root@compaq:~# 

effectivement j'ai qques différence, je regarde de mon coté, je vais tenter des petites choses pour voir, je pense qu'il mal installé puis je vais faire dormir les yeux car demain debout à 4h boulo oblige je reviens sur le foum demain soir pour voir si je trouve qques chose et tenir au courrant de mes progres encore merci pour tout
a demain si tout foi vous avez encore un peu de votre temps à me consacrer.
cordialement
Cyril
Bonne nuit

lami20j · Answer

quand tu es ici cyril@compaq:~$
tape sudo -s pour passer en root
tu vérifie avec la commande whoami pour voir si tu es root
ensuite fait

cd /var/www
rm phpmyadmin
ln -s /usr/share/phpmyadmin
ls -l /var/www/phpmyadmin

joussecy · Answer

Bonjour, 
j'ai enfin de news pas forcement bonne mais j'ai enfin qques chose dans le fichier 

var/log/apache2/error.log

[Wed Oct 03 22:28:55 2007] [notice] Graceful restart requested, doing restart
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Wed Oct 03 22:28:56 2007] [notice] Apache/2.2.3 (Ubuntu) PHP/5.2.1 configured -- resuming normal operations

lami20j · Answer

apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName 
c'est juste un warning, ce n'est pas grave ça ;-)
fait ce que je t'ai dit dans mon message précédent

joussecy · Answer

Bonjour, 
ok c'est et la bonne nouvelle ca marche apres redémarrage tout simplement et pas une erreur, merveilleux non, juste que dans la barre d'@ il faut que je mette 127.0.0.1 reste plus qu'a faire un alias et l'affaire et dans le sac.
Une nouvelle foi merci d'avoir restauré mon système et rendu mes neurones (2)
Cette foie j'atteins 
juste pour info ces cmd sont pour les liens ?
ln -s /usr/share/phpmyadmin
ls -l /var/www/phpmyadmin

Cordilament

lami20j · Answer

ln -s c'est pour le lien symbolique
ls -l c'est pour afficher le contenu du répertoire

 il faut que je mette 127.0.0.1 reste plus qu'a faire un alias et l'affaire et dans le sac. 

affiche
cat /etc/hosts
rgrep -i servername /etc/apache2

joussecy · Answer

Bonjour, 
cyril@compaq:~$ cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 compaq Ho!ho! pas bon je corrige de suite

# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
192.168.1.1 compaq
cyril@compaq:~$ rgrep -i servername /etc/apache2
/etc/apache2/apache2.conf:    # with the URL of http://servername/server-status
/etc/apache2/apache2.conf:    #  http://servername/server-info (requires that mod_info.c be loaded).
cyril@compaq:~$

joussecy · Answer

Bonjour, 
apres correction c'est ok

joussecy · Answer

encore merci 
je reprends toutes les manip demain histoire de comprendre ce que vous m'avez fait faire mais maintenant tout est ok
bonne nuit,
Cordialement
Bye

lami20j · Answer

on peut mettre résolu ? ;-)

joussecy · Answer

Bonjour, 
oui sans pb

lami20j · Answer

ok, c'est fait
bonne continuation ;-)

lansangel · Answer

slt à tous. je suis nouveau sur debian et j'ai pu configurer freeradius + mysql. mais pour dialupadm et chillispot c'est une autre histoire. je ne sais pas si c'est mon serveur apache qui est mal configuré en tout cas pour chillispot il m'afiche login failed. si quelqu'un pouvait m'envoyer un lien pour la tuto sur l'installation du serveur apache + chillispot+ dialupadmin cela m'aiderais beaucoup. merci d'avance à tous pour votre solllicitude.

Ubuntu + phph5 et apache2

50 réponses

Discussions similaires