Alerte ! Adaptateur secteur Xxxxx W expédié à l'origine
san_8600
Posted messages
23
Status
Member
-
jfmimi Posted messages 13664 Registration date Status Contributor Last intervention -
jfmimi Posted messages 13664 Registration date Status Contributor Last intervention -
Hello,
I acquired a refurbished Dell OptiPlex 3020 this week. When I tried it out, everything went smoothly. However, when I wanted to check the BIOS, I received this message:
Alert! Xxxxx W AC adapter originally shipped
The system will adjust the performance to match the power available. Please connect a Dell xxxxx W AC adapter or greater for the best system performance
Strike the F3 key (before F1/F2/F5 key) if you do not want to see the power warning message again.
To continue press F1 key
To change setup option press F2 key
To run onboard diagnostics press F5 key
I can no longer exit this page using the aforementioned keys or others (Del, Esc, and all the F... keys)
I went to check the manufacturer's documentation regarding the power supply, but the references don't really match, and I’m struggling to find tutorials on AC adapters:
Here’s what I found regarding the manufacturer:
Coin-cell battery 3V Lithium CR2032
Voltage 90 VAC to 264 VAC
Wattage 290 W
Maximum heat dissipation N/A
And my replacement AC adapter:
MODEL ZH-67-334
Input: 100-240V-1.6A
50/60HZ
Output: 19.5V - 3.34A
Can anyone tell me if this is a compatible power supply for my PC and if there is a way to get out of the block I am in, please?
Thanks in advance.
I acquired a refurbished Dell OptiPlex 3020 this week. When I tried it out, everything went smoothly. However, when I wanted to check the BIOS, I received this message:
Alert! Xxxxx W AC adapter originally shipped
The system will adjust the performance to match the power available. Please connect a Dell xxxxx W AC adapter or greater for the best system performance
Strike the F3 key (before F1/F2/F5 key) if you do not want to see the power warning message again.
To continue press F1 key
To change setup option press F2 key
To run onboard diagnostics press F5 key
I can no longer exit this page using the aforementioned keys or others (Del, Esc, and all the F... keys)
I went to check the manufacturer's documentation regarding the power supply, but the references don't really match, and I’m struggling to find tutorials on AC adapters:
Here’s what I found regarding the manufacturer:
Coin-cell battery 3V Lithium CR2032
Voltage 90 VAC to 264 VAC
Wattage 290 W
Maximum heat dissipation N/A
And my replacement AC adapter:
MODEL ZH-67-334
Input: 100-240V-1.6A
50/60HZ
Output: 19.5V - 3.34A
Can anyone tell me if this is a compatible power supply for my PC and if there is a way to get out of the block I am in, please?
Thanks in advance.