View original (French)

Tool-less RJ45 connector cabling

johndenice06000 Posted messages 2 Status Member -  
brupala Posted messages 111154 Registration date   Status Member Last intervention   -

Hello everyone,
I am here because I ordered 3 RJ45 connectors to assemble without a crimping tool for my apartment. However, I do not understand the wiring diagram/color code for the connector. Could you please enlighten me, knowing that my wall connectors are wired in B (1 and 2: white/orange pair - 3 and 6: white/green pair - 4 and 5: white/blue - 7&8: white/brown).

Thank you in advance.
Jonathan

Configuration: Macintosh / Safari 13.1

2 answers

  1.
    brupala Posted messages 111154 Registration date   Status Member Last intervention   14 451
     
    Hi,
    logically,
    you should match according to your photo:
    at the top:
    white of green, green - white of brown, brown
    at the bottom:
    white of orange, orange - blue, white of blue
    But, you shouldn’t have wired it with female connectors on one end and male connectors on the other end, the rule is to connect a wall outlet to a female connector on the other end (patch panel) or another wall outlet and finish with flexible cords on each end, it gives more freedom, even though you can always add couplers to the male connectors.
    With this type of connector, it shouldn’t cause too much of a problem as they also fit rigid single-strand wires, unlike RJ45 connectors that need to be assembled with a crimping tool which only fit stranded wires.

    --
    and... Voila Voilou Voila!
    4