No HDMI port on my television for the new Canal + decoder...

Hello,
What are the input connections of your TV?
What is its full model number?

--
I call a spade a spade *
*in French in the text

I have to disconnect soon, so:
If your TV has yellow, red, and white RCA inputs:
Buy this:
https://www.amazon.fr/GANA-Convertisseur-Composite-Prenant-Dalimentation/dp/B06XJTV33G/ref=pd_bxgy_img_2/257-4989892-8416757?_encoding=UTF8&pd_rd_i=B06XJTV33G&pd_rd_r=d1f94afa-7d16-42b4-9131-fda861e4856f&pd_rd_w=LXDjT&pd_rd_wg=ZexJ8&pf_rd_p=6f987254-9a2f-416c-82f5-9555ce4bf24d&pf_rd_r=DGGRA5131TX308G9S30M&psc=1&refRID=DGGRA5131TX308G9S30M
As well as the RCA cable sold together below
If your TV only has a SCART connector, you will also need this:
Which you will switch to IN
Note: the converter must be powered; if it doesn't come with a power source, you'll need to plug it into a USB port or a 220V -> USB outlet like a phone charger

--
I call a spade a spade *
*in French in the text

Hi,
The DVI-I input seems suitable for an HDMI source.
All other video inputs are analog, so a device that converts from digital to analog is required.
With an HDMI > DVI cable, nothing else would be needed other than the cable, as the signal is the same on both sides (DVI and HDMI share the same protocol, so there's no incompatibility).

However, since the TV isn't brand new, it would be good to test the DVI input. First, check that it indeed supports digital mode, not just analog mode.

With a PC, make sure to check what resolutions it supports. This also depends on whether it's a single link or dual link DVI, but since the TV displays 1366x768, there would be no point in benefiting from the extra bandwidth of dual link anyway.

You should also try sending a progressive and interlaced signal to verify that both are supported.

On the other hand, it's not certain that audio will be transmitted. Although it can be physically, audio reception is generally not implemented for DVI inputs.

It also exists:
https://www.fnac.com/mp32553500/Convertisseur-HDMI-vers-Peritel-noir/w-4?oref=9aa9ef71-842a-218d-f02e-0a4b81a531a5&Origin=CMP_GOOGLE_MP_TV&esl-k=sem-google%7Cng%7Cc296172261589%7Cm%7Ckpla574114837897%7Cp%7Ct%7Cdc%7Ca59087472386%7Cg1575968046&gclid=CjwKCAiA35rxBRAWEiwADqB376Iz8ZATXEaBx6iHFozVaUsTLPv77NWxaZLtssss5uRbVn0VSwesLRoCHg4QAvD_BwE&gclsrc=aw.ds

but the component solution will give you a much better image:
https://forums.commentcamarche.net/forum/affich-36422071-pas-de-prise-hdmi-sur-mon-televiseur-pour-le-nouveau-decodeur-canal-hdmi#5

--
I call a spade a spade *
*in French in the text

But you're welcome, and is your problem solved?
If so, how? Important for the community

--
I call a spade a spade *
*in French in the text