View original (French)

Panasonic

abogahis Posted messages 3 Status Member -  
baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   -
Hello,

Hello
If the symbol "in the base zone" is flashing three possibilities:
- The handset is too far from the base. ==> Move it closer.
- The power adapter of the base is poorly connected. ==> Reconnect the power adapter to the base.
- The handset is not registered to the base. ==> Register it
The procedure below (click on it to enlarge)

I have tried it but it doesn't always work.

3 answers

  1.
    abogahis Posted messages 3 Status Member
     
    and on top of that, I can't change the password anymore.
    0
  2. baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387
     
    Hello,
    What model is this Panasonic?..

    -- 
     Very difficult to catch a black cat in a dark room.
                                  Especially when it's not there...
    0
    1. abogahis Posted messages 3 Status Member
       
      Panasonic KX-TGA161EX
      0
  3. baladur13 Posted messages 47322 Registration date   Status Moderator Last intervention   14 387
     
    KX-161EX? The reference seems incomplete, is it not KX-1611ex?
    So, it is the antenna-shaped icon that is blinking on the handset's screen
    Are you sure the base's power supply is working properly?
    Did you follow the procedure for registering a handset on the base as described on page 29 of the manual?
    Is your pin code still the original one: 0000?
    The manual: https://images-eu.ssl-images-amazon.com/images/I/A1zNDoYrrxS.pdf
    -- 
     It is very difficult to catch a black cat in a dark room.
                                        Especially when it is not there...
    0