CI Plus key Fail...

Hello, I have a small red rectangle at the top of my TV that says "CI Plus key Fail..." How can I remove that? Knowing that I don't have the original remote control, I bought another Philips.
Thank you for your responses

Configuration: Android / Chrome 71.0.3578.99

5 answers

  • Votes
  • Date
  • Descending date
  1. THE answer:
    translated from Dutch:
    Turn on the device
    Press MENU, 1, 9, 9, 9, BACK in that order. A special menu will now appear.
    Scroll down the list to DRM Warning.
    Press the right arrow to set it to OFF. Now turn the device off and back on and enjoy your viewing experience


    Or in French:
    Press MENU (home button for me), then 1, 9, 9, 9, BACK. Now there is a special menu.
    Scroll down the list to DRM Warning. (number 65, you can use the up arrow to go faster)
    Press the right arrow to set it to OFF. Now turn the device off and back on and I wish you a lot of viewing pleasure

    Thank you to him... I’ve been looking for the solution for six months!
    1. Hello
      thank you but this menu does not appear in the service mode list.
      philips 24phh8400

      I will try with virgin mode. Virgin mode mentioned in other forums
    2. @THIERRYthe Back button is the U-shaped arrow
      You need to find DRM warning
      On my model, it's line 65, but on others, it might be a different line.
    3. @zantarzanHello, I can't find any matching DRM warning on my TV, what should I do?
    4. @Coucou44Hello
      Same
      The menu appears well but no DRM warning
      However, there is a C1key type selection
      Either “test key” or “product key” but it does nothing

      Help !!
    5. @Francis1954_3007Try updating the firmware first.

      The procedure is explained on your television. (home button > help > software > software update)
      If that doesn't work, you can find your firmware on the Philips website using the model number of your television located on the back of it. (Philips website > Image and sound > Television > TV support > Software and drivers > Enter your serial number) The installation procedure remains the same as explained in the help section.

      Once this is done, repeat the procedure mentioned above.

      Hoping to have helped move things forward.