View original (French)

Valueline Universal Remote VLR-RC001

benj -  
 benj -
Hello,

I have a Valueline vlr-rc001 universal remote and I can't find the DVD player button to enter the code for my DVD player brand. Can someone please help me?

Configuration: Android / Chrome 71.0.3578.99

2 answers

  1.
    jeanbern Posted messages 13740 Registration date   Status Contributor Last intervention   5 136
     
    Hello,
    Installation

    Direct code mode:
    Turn on the device manually. Look for the brand and code of the device in
    the list of codes provided. For example, TV/TXT brand ACE, code 0713. Press
    “SET” and then the device button, such as “TV1”, the indicator lights up. Enter the
    code “0713”, once the last digit is entered, the indicator goes off. Check that all
    buttons work correctly. If not, choose a different code.
    If no other codes are available, use the quick search mode.
    To exit installation mode, press the device button again or
    wait 10 seconds; the exit will happen automatically.
    Note: For buttons without function, the indicator does not light up.
    If direct mode is unsuccessful, use quick search mode.

    Quick search mode:
    Turn on the device manually. Press and hold the “SET” button and then press
    the button of the device to be programmed. Release both buttons, the indicator lights up.
    Press “SET” again, the indicator starts flashing. Press the
    “POWER” button repeatedly until the device responds (turns off), then
    press “SET” and then the device button again. Check that all
    buttons work correctly. If not, repeat the procedure.
    The code search will start with the next code (not with zero).
    Note: The direction of the search can be changed by pressing “SET” once for a backward search and a second time for a forward search. By default, it is always forward.

    Automatic search mode:
    Manually turn on the TV, VCR, receiver, etc. Press the button of the
    device to be programmed, then simultaneously press “SET (green) + POWER (red)”
    until the indicator flashes. Point the remote control at the device to be controlled.
    When the device responds, press the “POWER” button. Check that all
    buttons work correctly. If not, repeat the procedure, but read the code first (see below).
    Reading:
    To read the 4 digits of the code, press and hold the “SET” button and press “1”
    for the first digit. Release the “SET” button. Press the “SET” button again
    and press “2” for the second digit. Press the “SET” button again and press “3” for the third digit and “4” for the fourth digit.
    Note: Write down the number of flashes of the indicator for each digit.

    (excerpt from the user manual)

    2