Windows 7 - Driver not installed (code 28)

Question

Hello, I formatted my computer yesterday to reinstall a version of Windows 7 instead of 10.
Everything has been working since except for my network card, I've tried quite a few things:

installing the drivers from the various official supplier sites, but nothing works.. any help? :/

billmaxime · Accepted Answer

hi

give me the brand and model of your pc, and whether it's 32 or 64 bits?

https://www.commentcamarche.net/informatique/windows/169-32-bits-ou-64-bits-comment-savoir/

@+

--
the radiation level is higher at the employment center than at Chernobyl

llez · Answer

Hello, TP-LINK TL-WN951N Network Card Intel Core i7-2600K (3.4 GHz) CPU ASUS P8Z68-V GEN 3 Motherboard it's a x64

billmaxime · Answer

Re

it's a wifi adapter that you installed on a desktop PC

download this driver to your desktop click here

it's a zipped file, you need to unzip it with 7zip (for example)

link >> https://www.7-zip.org/

PS: take the 64 bits for your PC

open the unzipped file and run the SETUP.EXE as administrator (right-click)

if you need the driver for wired connection (Ethernet) click here

let me know how it goes

@+

kaneagle · Answer

Hello,  Download this one --> TL-WN951 and place it in your documents.  Right-click on --> TL-WN951_V3_130529.zip Select --> 7Zip Choose --> extract to "TL-WN951_V3_130529\"  Go to Device Manager. Right-click on the device Update driver Browse my computer for drivers Choose from a list of drivers... Have Disk Browse Go to your documents Go to the unzipped driver folder --> TL-WN951_V3_130529 Folder --> Drivers Files Folder --> Windows 7 64bit Select the file --> netathrx.inf and OK. Restart.    -- The human being is at its best when things are at their worst.

billmaxime · Answer

re

is your adapter not properly inserted in its slot?

check this page to see if it’s the same >> https://www.tp-link.com/fr/support/download/tl-wn951n/#Driver

can’t you connect via Ethernet (cable)?

would reinstalling Windows 10 and wiping out 7 fix my driver problem or not at all?

I don’t see a driver for W10 for this adapter...

@+

--
the radiation level is higher at the employment office than at Chernobyl

billmaxime · Answer

re

post 1 screenshot of your device manager >> network card

https://www.commentcamarche.net/infos/25913-ccm-inserer-une-image-dans-une-discussion/

@+

--
the radiation level is higher at the employment office than in Chernobyl

billmaxime · Answer

re

install the Chipset driver click here

and the one for the Ethernet connection click here

once it's done, repost a screenshot of your device manager

@+

--
the radiation level is higher at the unemployment office than at Chernobyl

kaneagle · Answer

After installing the Chipset:
Try these 3 drivers:
--> USB
--> MEI
--> Ethernet

Go back to the Device Manager:
Provide the hardware IDs of the remaining problematic devices
Look at this --> Find the identification number of a device
Post the IDs in your next message.

billmaxime · Answer

re

did you see this message from Kaneagle? >> https://forums.commentcamarche.net/forum/affich-35397890-windows-7-driver-non-installe-code-28#15

@+

--
the radiation level is higher at the employment office than at Chernobyl

llez · Answer

I repost here just in case:

screenshot of the device manager https://imgur.com/a/RB3J9Te

Ethernet Controller - Hardware Ids:

PCI\VEN_8086&DEV_1503&SUBSYS_849C1043&REV_05
PCI\VEN_8086&DEV_1503&SUBSYS_849C1043
PCI\VEN_8086&DEV_1503&CC_020000
PCI\VEN_8086&DEV_1503&CC_0200

Network Controller - Hardware Ids:

PCI\VEN_168C&DEV_0023&SUBSYS_3071168C&REV_01
PCI\VEN_168C&DEV_0023&SUBSYS_3071168C
PCI\VEN_168C&DEV_0023&CC_028000
PCI\VEN_168C&DEV_0023&CC_0280

Unknown Device - Hardware Ids:

USB\VID_0CF3&PID_3000&REV_0200
USB\VID_0CF3&PID_3000

billmaxime · Answer

re

for this one >> Ethernet Controller - Hardware Ids:

PCI\VEN_8086&DEV_1503&SUBSYS_849C1043&REV_05

download this driver to your desktop click here

@+

--
the radiation level is higher at the employment office than at Chernobyl

billmaxime · Answer

I installed it but no change :/   Do you still have the yellow ? in the device manager?  @+

billmaxime · Answer

re

ok, for this one >> Network Controller - Hardware Ids:

PCI\VEN_168C&DEV_0023&SUBSYS_3071168C&REV_01

download this driver to your desktop click here

unzip it to ultimately select this file >> netathwx.inf

let us know how that goes

@+

--
the radiation level is higher at the unemployment office than at Chernobyl

billmaxime · Answer

re  If I understand correctly, it's not* the dev id .exe that you need to download.  If it's the dev id.exe that you need to download  then you have to unzip it and follow the instructions in this message from Kaneagle to reach the file >> netathwx.inf and click on OK  @+  -- the radiation level is higher at the employment center than at Chernobyl

billmaxime · Answer

re  I don't have a zip file, it's just an .exe which ultimately tells me error device not found  You have to right-click on it and choose 7zip >> extract to...  @+    -- The radiation level is higher at the job center than at Chernobyl.

billmaxime · Answer

re  wow, thanks for your patience.. a thank you feels too weak.. problem solved, I've got the wifi back, again THANK YOU to both of you for your time and patience, really top notch..   no worries for the help :), we were happy to help  let me know if you have any ? or /!\ yellow icons in the device manager  @+   -- the radiation level is higher at the employment agency than at Chernobyl

billmaxime · Answer

re  /!\ always on Ethernet and unknown device ^^'   I will look for it :)  @+  -- the radiation level is higher at the unemployment office than at Chernobyl

billmaxime · Answer

re

for this one >> Ethernet Controller - Hardware Ids:

PCI\VEN_8086&DEV_1503&SUBSYS_849C1043&REV_05

if you no longer have it on your desktop, download this driver again click here

it's a EXE that you need to unzip with zip >> extract to

follow the usual procedure to update your device

open the unzipped file >> PROXGB >> Winx64 >> NDIS62 >> ixe62x64.inf dated 05/15/2013

let us know what happens

@+

billmaxime · Answer

re

and for this one >> Unknow Device - Hardware Ids:

USB\VID_0CF3&PID_3000&REV_0200

download this driver to your desktop click here

it's a zipped driver, so the same procedure as before

you open the unzipped file >> qualcomm_atheros_bigfootnetworks_killer_6.1.0.590_win7_8_64bit >> and run the SETUP.EXE as administrator (right click)

let us know how it goes

@+

--
the radiation level is higher at the employment office than in Chernobyl

kaneagle · Answer

If it doesn't work for the Unknown Device: Try this one --> Atheros   -- Human beings are at their best when things are at their worst.

Windows 7 - Driver not installed (code 28)

20 réponses

Texture issues in enshrouded

[urgent] what does "prise (aux in)" mean?

Saracroche: the effective french app against phone spam

How to watch tv when the freebox is not working properly?

Search for music from the movie street dancers.

Watching a movie on your ps3 via usb drive

Reset toshiba laptop windows 7 without cd

Double letter keyboard issue

Black screen issue ps3 hdmi

Misunderstanding of the ending of another earth