View original (French)

Casio SE-S100 register SD card full issue

bagus2018 Posted messages 4 Status Membre -  
 bagus2018 -
Hello everyone and thank you for your advice.

I just bought a SE-S100 register, everything went fine with the programming and the first tests as well.
Still in training mode, I simulated a few days of sales and the first 3 Z reports came out fine with "SD CARD NORMAL END" at the bottom; however, on the 4th day the Z report came out but with "SD CARD ERROR END 0787" and on the register screen "SD memory full E103". The next day the 2 reports were combined with a normal end.
Today again "SD memory full E103".
Please, what should I do?
Help, thanks.

3 réponses

Réponse 1 / 3
MarsCake
 
Hello,

Unfortunately, I had the same problem as you, but I was able to resolve it with a setting option on the machine.

Procedure:
1) In PGM mode: press keys 1 then Sub Total

2) Enter 10900 then Sub Total

3) Press 0, 1, 2, or 3 (2 for me)
0: Do not save to the SD card
1: Save X reports
2: Save Z reports
3: Save both X and Z reports
Then to validate, press the CA/TEND key.
47
bagus2018
 
Thank you for your information. I was also advised to change my SD card, and since I did that, there have been no more problems.
1