Can you use two power supplies for a PC?
theserialkiller10
Posted messages
12
Registration date
Status
Membre
Last intervention
-
jenoce2007 -
jenoce2007 -
Hello
I would like to know if we can use two power supplies for the same PC because I bought a graphics card and for me it requires a lot of power, so could you please advise me
Thanks in advance for your help
Best regards
theserialkiller10
I would like to know if we can use two power supplies for the same PC because I bought a graphics card and for me it requires a lot of power, so could you please advise me
Thanks in advance for your help
Best regards
theserialkiller10
Configuration: Windows XP Firefox 2.0.0.6
14 réponses
hello 2 power supplies in a PC yes and no
I personally own three power supplies in my "MACHINE" of about 300 watts each
the wiring is not very difficult
one for the motherboard and the disk that contains the operating systems, one for the 2 IDE drives and the 4 RAID disks and cooling, and the last one for the 6 SCSI disks.
everything depends on the space in the case and the actual electrical needs, the simplest and safest option is to use a single, more powerful power supply.
recovering power supplies and tinkering (power-on commands, connecting them via relays for synchronized startup, creating a common ground, cutting the standard connector (the one going to the motherboard), identifying the wires and retrieving only those that correspond to the accessory needs
essential materials soldering iron electrical wires 12 volts or 5 volts relays terminal blocks heat shrink tubing multimeter
and a bit of knowledge and time
finally, it should be noted that a switching power supply is generally used most of the time at 40% of its capacity
there you go, quite a bit of tinkering
I personally own three power supplies in my "MACHINE" of about 300 watts each
the wiring is not very difficult
one for the motherboard and the disk that contains the operating systems, one for the 2 IDE drives and the 4 RAID disks and cooling, and the last one for the 6 SCSI disks.
everything depends on the space in the case and the actual electrical needs, the simplest and safest option is to use a single, more powerful power supply.
recovering power supplies and tinkering (power-on commands, connecting them via relays for synchronized startup, creating a common ground, cutting the standard connector (the one going to the motherboard), identifying the wires and retrieving only those that correspond to the accessory needs
essential materials soldering iron electrical wires 12 volts or 5 volts relays terminal blocks heat shrink tubing multimeter
and a bit of knowledge and time
finally, it should be noted that a switching power supply is generally used most of the time at 40% of its capacity
there you go, quite a bit of tinkering
sparklet
Posted messages
907
Status
Membre
145
Totally agree with you, it's better to have a good, more powerful one
Bescherelle
Indeed, it's better to have a big one! Otherwise, would it be possible to have the same comment written in French? I don't understand everything that is written, it's a shame for a response that has been selected 5 times.
jenoce2007
thank you