Pb de finalisation de cd ou dvd avec nero6

jerome6970 Messages postés 4 Statut Membre -  
 sv25170 -
depuis 2 jours, il m'est impossible de finaliser un dvd ou cd de données avec nero6 ou autre logiciel de gravure, c grisé donc impossible de cocher et je ne suis pas en multisession et je n' ai pas changé de matrériel dernièrement; quelqu' un pourrait il m'aider, je grave très souvent depuis des années sans aucun soucis, j' ai foramté et réinstallé mais rien n' y fait
Merci d' avance.
Configuration: Windows XP
Internet Explorer 6.0

3 réponses

  2.
    jerome6970 Messages postés 4 Statut Membre
     
    dsl pas trouvé mon bonheur sur le lien que tu m'as donné, mais estce que cela peut venir d'un defaillance de mon graveur.
    Merci
    0
    1. sv25170
       
      le lien que je t'ai donne,n'est pas une soluition proprement parle,je te demande juste le fichier og de nero est ça te dit ou le trouver et comment le poster!!!
      apres analyse,on verra si certaine chose cloche!
      0
    2. jerome6970 Messages postés 4 Statut Membre
       
      je doit etre nul je suis allé dans C://programmesfiles/ahead/nero/nerohistory, mais je ne sais pas comment te l'envoyer
      0
      1. sv25170 > jerome6970 Messages postés 4 Statut Membre
         
        clic droit,copier coller(apres avoir tout surligne bien sur)
        0
      2. jerome6970 Messages postés 4 Statut Membre > jerome6970 Messages postés 4 Statut Membre
         
        jerome

        1A22-020K-0530-1349-1219-9976*

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
        Version de Nero : 6.0.0.16
        Graveur : <DVDRW IDE1008> Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ATAPI
        CD-ROM : <DVDRW IDE1008 >Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        DVDRW IDE1008 J: CDRom0
        =======================

        AutoRun : 1
        Excluded drive IDs:
        CmdQueuing : 1
        CmdNotification: 2
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        EraseSpeed : 0
        BUFE : 0
        Physical memory : 1022MB (1047280kB)
        Free physical memory: 726MB (744032kB)
        Memory in use : 28 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        5.7.2007
        CD-ROM (ISO)
        23:16:26 #1 Text 0 File Isodoc.cpp, Line 5907
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : TAO
        Mode : 1
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path : TRUE
        Write ISO9660 ;1 file extensions : TRUE

        23:16:26 #2 Phase 89 File dlgbrnst.cpp, Line 1843
        Super Link activé

        23:16:26 #3 Text 0 File Reader.cpp, Line 118
        Reader running

        23:16:26 #4 ISO9660GEN -11 File geniso.cpp, Line 3861
        First writeable address = 0 (0x00000000)

        23:16:26 #5 Text 0 File Burncd.cpp, Line 3169
        Turn on Piste par piste, using CD-R/RW media

        23:17:16 #6 Phase 40 File dlgbrnst.cpp, Line 1843
        Interruption par l'utilisateur

        23:17:16 #7 Text 0 File DlgWaitCD.cpp, Line 230
        Last possible write address on media: 359848 (79:59.73)
        Last address to be written: 361140 (80:17.15)

        23:17:16 #8 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE

        23:17:16 #9 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: DVDRW IDE1008;
        CD type reading failed
        ATIP Data: ?

        23:17:16 #10 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        Not enough free discspace.
        (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)


        Existing drivers:
        File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        ====== *** Nero-Burning Rom, History File *** ======
        jerome

        1A22-020K-0530-1349-1219-9976*

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
        Version de Nero : 6.0.0.16
        Graveur : <DVDRW IDE1008> Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ATAPI
        CD-ROM : <DVDRW IDE1008 >Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        DVDRW IDE1008 J: CDRom0
        =======================

        AutoRun : 1
        Excluded drive IDs:
        CmdQueuing : 1
        CmdNotification: 2
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        EraseSpeed : 0
        BUFE : 0
        Physical memory : 1022MB (1047280kB)
        Free physical memory: 724MB (741884kB)
        Memory in use : 29 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        5.7.2007
        CD-ROM (ISO)
        23:19:57 #1 Text 0 File Isodoc.cpp, Line 5907
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : DAO
        Mode : 1
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path : TRUE
        Write ISO9660 ;1 file extensions : TRUE

        23:19:57 #2 Phase 89 File dlgbrnst.cpp, Line 1843
        Super Link activé

        23:19:57 #3 Text 0 File Reader.cpp, Line 118
        Reader running

        23:19:57 #4 ISO9660GEN -11 File geniso.cpp, Line 3861
        First writeable address = 0 (0x00000000)

        23:19:57 #5 Text 0 File Burncd.cpp, Line 3169
        Turn on Disque entier, using CD-R/RW media

        23:19:59 #6 Phase 40 File dlgbrnst.cpp, Line 1843
        Interruption par l'utilisateur

        23:19:59 #7 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE

        23:19:59 #8 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: DVDRW IDE1008;
        CD type reading failed
        ATIP Data: ?

        23:19:59 #9 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        Insert empty disc to write to.
        (Medium in drive: Inconnu. Medium required by compilation: CD-R/RW.)


        Existing drivers:
        File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        ====== *** Nero-Burning Rom, History File *** ======
        jerome

        1A22-020K-0530-1349-1219-9976*

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
        Version de Nero : 6.0.0.16 (Nero Express)
        Graveur : <DVDRW IDE1008> Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ATAPI
        CD-ROM : <DVDRW IDE1008 >Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        DVDRW IDE1008 J: CDRom0
        =======================

        AutoRun : 1
        Excluded drive IDs:
        CmdQueuing : 1
        CmdNotification: 2
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        EraseSpeed : 0
        BUFE : 0
        Physical memory : 1022MB (1047280kB)
        Free physical memory: 635MB (650748kB)
        Memory in use : 37 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        6.7.2007
        CD-ROM (ISO)
        23:55:21 #1 Text 0 File Isodoc.cpp, Line 5907
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : DAO
        Mode : 1
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path : TRUE
        Write ISO9660 ;1 file extensions : TRUE

        23:55:21 #2 Phase 89 File dlgbrnst.cpp, Line 1843
        Super Link activé

        23:55:21 #3 Text 0 File Reader.cpp, Line 118
        Reader running

        23:55:21 #4 Text 0 File Writer.cpp, Line 127
        Writer DVDRW IDE1008 running

        23:55:21 #5 ISO9660GEN -11 File geniso.cpp, Line 3861
        First writeable address = 0 (0x00000000)

        23:55:21 #6 Text 0 File Burncd.cpp, Line 3169
        Turn on Disque entier, using CD-R/RW media

        23:55:31 #7 Text 0 File DlgWaitCD.cpp, Line 230
        Last possible write address on media: 368999 (82:01.74)
        Last address to be written: 360989 (80:15.14)

        23:55:31 #8 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE

        23:55:31 #9 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: DVDRW IDE1008;
        CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
        ATIP Data:
        Special Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
        Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

        23:55:31 #10 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        Not enough free discspace.
        (Medium in drive: Inconnu. Medium required by compilation: CD-R/RW.)

        23:55:31 #11 Text 0 File ThreadedTransferInterface.cpp, Line 769
        Setup items (after recorder preparation)
        0: TRM_DATA_MODE1 (CTransferItem)
        2 indices, index0 (150) not provided
        original disc pos #0 + 360990 (360990) = #360990/80:13.15
        relocatable, disc pos for caching/writing not required/required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 360990 blocks [DVDRW IDE1008 ]
        --------------------------------------------------------------

        23:55:31 #12 Text 0 File ThreadedTransferInterface.cpp, Line 938
        Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO
        DAO infos:
        ==========
        MCN: ""
        TOCType: 0x00; Session Closed, disc fixated
        Tracks 1 to 1:
        1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 739614720, ISRC ""
        DAO layout:
        ===========
        __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
        -150 | lead-in | 0 | 0x00 | 0x41
        -150 | 1 | 0 | 0x00 | 0x41
        0 | 1 | 1 | 0x00 | 0x41
        360990 | lead-out | 1 | 0x00 | 0x41

        23:55:32 #13 Phase 24 File dlgbrnst.cpp, Line 1843
        Début de mise en cache des fichiers

        23:55:32 #14 Phase 25 File dlgbrnst.cpp, Line 1843
        Cache des fichiers terminé

        23:55:32 #15 Phase 36 File dlgbrnst.cpp, Line 1843
        Début de gravure à 32x (4 800 Ko/s)

        23:55:32 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2136
        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

        23:55:32 #17 Text 0 File Mmc.cpp, Line 14640
        StartDAO : CD-Text - Off

        23:55:32 #18 Text 0 File Mmc.cpp, Line 19140
        Set BUFE: Super Link -> ON

        23:55:32 #19 Text 0 File Mmc.cpp, Line 14960
        CueData, Len=32
        41 00 00 14 00 00 00 00
        41 01 00 10 00 00 00 00
        41 01 01 10 00 00 02 00
        41 aa 01 14 00 50 0f 0f

        23:58:53 #20 Text 0 File WriterStatus.cpp, Line 113
        <DVDRW IDE1008 > start writing Lead-Out at LBA 360990 (5821Eh), lenght 0 blocks

        00:00:25 #21 Text 0 File ThreadedTransfer.cpp, Line 228
        all writers idle, stopping conversion

        00:00:25 #22 Text 0 File dlgbrnst.cpp, Line 1703
        Set remaining time: 0:00,000 (0ms) -> OK

        00:00:25 #23 Phase 37 File dlgbrnst.cpp, Line 1843
        Gravure terminée avec succès à 32x (4 800 Ko/s)

        00:00:25 #24 Text 0 File Burncd.cpp, Line 4570
        1 ruptures de flux de données ont été évitées.


        Existing drivers:
        File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        ====== *** Nero-Burning Rom, History File *** ======
        jerome

        1A22-020K-0530-1349-1219-9976*

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
        Version de Nero : 6.0.0.16 (Nero Express)
        Graveur : <DVDRW IDE1008> Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ATAPI
        CD-ROM : <DVDRW IDE1008 >Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        DVDRW IDE1008 J: CDRom0
        =======================

        AutoRun : 1
        Excluded drive IDs:
        CmdQueuing : 1
        CmdNotification: 2
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        EraseSpeed : 0
        BUFE : 0
        Physical memory : 1022MB (1047280kB)
        Free physical memory: 528MB (541224kB)
        Memory in use : 48 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        6.7.2007
        CD-ROM (ISO)
        16:50:03 #1 Text 0 File Isodoc.cpp, Line 5907
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : TAO
        Mode : 1
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path : TRUE
        Write ISO9660 ;1 file extensions : TRUE

        16:50:03 #2 Phase 89 File dlgbrnst.cpp, Line 1843
        Super Link activé

        16:50:04 #3 Text 0 File Reader.cpp, Line 118
        Reader running

        16:50:04 #4 Text 0 File Writer.cpp, Line 127
        Writer DVDRW IDE1008 running

        16:50:04 #5 ISO9660GEN -11 File geniso.cpp, Line 3861
        First writeable address = 0 (0x00000000)

        16:50:04 #6 Text 0 File Burncd.cpp, Line 3169
        Turn on Piste par piste, using CD-R/RW media

        16:50:04 #7 Text 0 File DlgWaitCD.cpp, Line 230
        Last possible write address on media: 359848 (79:59.73)
        Last address to be written: 359579 (79:56.29)

        16:50:04 #8 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE

        16:50:04 #9 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: DVDRW IDE1008;
        CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
        ATIP Data:
        Special Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
        Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

        16:50:04 #10 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================

        16:50:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 769
        Setup items (after recorder preparation)
        0: TRM_DATA_MODE1 (CTransferItem)
        2 indices, index0 (150) not provided
        original disc pos #0 + 359580 (359580) = #359580/79:54.30
        relocatable, disc pos for caching/writing not required/required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359578 blocks [DVDRW IDE1008 ]
        --------------------------------------------------------------

        16:50:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 938
        Prepare recorder [DVDRW IDE1008 ] for write in TAO
        DAO infos:
        ==========
        MCN: ""
        TOCType: 0x00; Session Closed, disc fixated
        Tracks 1 to 1:
        1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 736727040, ISRC ""
        DAO layout:
        ===========
        __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
        -150 | lead-in | 0 | 0x00 | 0x41
        -150 | 1 | 0 | 0x00 | 0x41
        0 | 1 | 1 | 0x00 | 0x41
        359580 | lead-out | 1 | 0x00 | 0x41

        16:50:04 #13 Text 0 File ThreadedTransferInterface.cpp, Line 965
        Removed 2 run-out blocks from end of track 1.

        16:50:10 #14 Phase 24 File dlgbrnst.cpp, Line 1843
        Début de mise en cache des fichiers

        16:50:10 #15 Phase 25 File dlgbrnst.cpp, Line 1843
        Cache des fichiers terminé

        16:50:10 #16 Phase 36 File dlgbrnst.cpp, Line 1843
        Début de gravure à 32x (4 800 Ko/s)

        16:50:10 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2136
        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

        16:50:10 #18 Text 0 File Mmc.cpp, Line 19140
        Set BUFE: Super Link -> ON

        16:53:13 #19 Text 0 File ThreadedTransfer.cpp, Line 228
        all writers idle, stopping conversion

        16:53:17 #20 Text 0 File Mmc.cpp, Line 14103
        <DVDRW IDE1008 > start Close Session

        16:53:40 #21 Phase 37 File dlgbrnst.cpp, Line 1843
        Gravure terminée avec succès à 32x (4 800 Ko/s)


        Existing drivers:
        File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        ====== *** Nero-Burning Rom, History File *** ======
        jerome

        1A22-020K-0530-1349-1219-9976*

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
        Version de Nero : 6.0.0.16 (Nero Express)
        Graveur : <DVDRW IDE1008> Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ATAPI
        CD-ROM : <DVDRW IDE1008 >Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        DVDRW IDE1008 J: CDRom0
        =======================

        AutoRun : 1
        Excluded drive IDs:
        CmdQueuing : 1
        CmdNotification: 2
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        EraseSpeed : 0
        BUFE : 0
        Physical memory : 1022MB (1047280kB)
        Free physical memory: 600MB (615148kB)
        Memory in use : 41 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        6.7.2007
        CD-ROM (ISO)
        18:53:41 #1 Text 0 File Isodoc.cpp, Line 5907
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : TAO
        Mode : 1
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path : TRUE
        Write ISO9660 ;1 file extensions : TRUE

        18:53:41 #2 Phase 89 File dlgbrnst.cpp, Line 1843
        Super Link activé

        18:53:41 #3 Text 0 File Reader.cpp, Line 118
        Reader running

        18:53:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3861
        First writeable address = 0 (0x00000000)

        18:53:41 #5 Text 0 File Burncd.cpp, Line 3169
        Turn on Piste par piste, using CD-R/RW media

        18:53:52 #6 Phase 40 File dlgbrnst.cpp, Line 1843
        Interruption par l'utilisateur

        18:53:52 #7 Text 0 File DlgWaitCD.cpp, Line 230
        Last possible write address on media: 359848 (79:59.73)
        Last address to be written: 364745 (81:05.20)

        18:53:52 #8 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE

        18:53:52 #9 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: DVDRW IDE1008;
        CD type reading failed
        ATIP Data: ?

        18:53:52 #10 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        Not enough free discspace.
        (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)


        Existing drivers:
        File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        ====== *** Nero-Burning Rom, History File *** ======
        jerome

        1A22-020K-0530-1349-1219-9976*

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
        Version de Nero : 6.0.0.16
        Graveur : <DVDRW IDE1008> Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ATAPI
        CD-ROM : <DVDRW IDE1008 >Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        DVDRW IDE1008 J: CDRom0
        =======================

        AutoRun : 1
        Excluded drive IDs:
        CmdQueuing : 1
        CmdNotification: 2
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        EraseSpeed : 0
        BUFE : 0
        Physical memory : 1022MB (1047280kB)
        Free physical memory: 595MB (609476kB)
        Memory in use : 41 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        6.7.2007
        CD-ROM (ISO)
        18:54:36 #1 Text 0 File Isodoc.cpp, Line 5907
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : TAO
        Mode : 1
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path : TRUE
        Write ISO9660 ;1 file extensions : TRUE

        18:54:36 #2 Phase 89 File dlgbrnst.cpp, Line 1843
        Super Link activé

        18:54:36 #3 Text 0 File Reader.cpp, Line 118
        Reader running

        18:54:36 #4 ISO9660GEN -11 File geniso.cpp, Line 3861
        First writeable address = 0 (0x00000000)

        18:54:37 #5 Text 0 File Burncd.cpp, Line 3169
        Turn on Piste par piste, using CD-R/RW media

        18:54:47 #6 Phase 40 File dlgbrnst.cpp, Line 1843
        Interruption par l'utilisateur

        18:54:47 #7 Text 0 File DlgWaitCD.cpp, Line 230
        Last possible write address on media: 359848 (79:59.73)
        Last address to be written: 364745 (81:05.20)

        18:54:47 #8 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE

        18:54:47 #9 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: DVDRW IDE1008;
        CD type reading failed
        ATIP Data: ?

        18:54:47 #10 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================


        Existing drivers:
        File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        ====== *** Nero-Burning Rom, History File *** ======
        jerome

        1A22-020K-0530-1349-1219-9976*

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
        Version de Nero : 6.0.0.16 (Nero Express)
        Graveur : <DVDRW IDE1008> Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ATAPI
        CD-ROM : <DVDRW IDE1008 >Version: 0058 - HA 1 TA 0 - 6.0.0.16
        Pilote d'adaptateur :<atapi> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        DVDRW IDE1008 J: CDRom0
        =======================

        AutoRun : 1
        Excluded drive IDs:
        CmdQueuing : 1
        CmdNotification: 2
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        EraseSpeed : 0
        BUFE : 0
        Physical memory : 1022MB (1047280kB)
        Free physical memory: 670MB (686588kB)
        Memory in use : 34 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        7.7.2007
        CD-ROM (ISO)
        08:28:42 #1 Text 0 File Isodoc.cpp, Line 5907
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : TAO
        Mode : 1
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path : TRUE
        Write ISO9660 ;1 file extensions : TRUE

        08:28:42 #2 Phase 89 File dlgbrnst.cpp, Line 1843
        Super Link activé

        08:28:42 #3 Text 0 File Reader.cpp, Line 118
        Reader running

        08:28:42 #4 ISO9660GEN -11 File geniso.cpp, Line 3861
        First writeable address = 0 (0x00000000)

        08:28:42 #5 Text 0 File Burncd.cpp, Line 3169
        Turn on Piste par piste, using CD-R/RW media

        08:29:13 #6 Phase 40 File dlgbrnst.cpp, Line 1843
        Interruption par l'utilisateur

        08:29:13 #7 Text 0 File DlgWaitCD.cpp, Line 230
        Last possible write address on media: 359848 (79:59.73)
        Last address to be written: 364880 (81:07.05)

        08:29:13 #8 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE

        08:29:13 #9 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: DVDRW IDE1008;
        CD type reading failed
        ATIP Data: ?

        08:29:13 #10 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        Not enough free discspace.
        (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)


        Existing drivers:
        File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        ====== *** Nero-Burning Rom, History File *** ======
        je ne sais pas si tous ca te servira mais merci quand meme
        0
  3. sv25170
     
    tu n'as pas lu le tutorial ou quoi???????????????
    tu l'aurais lu,tu aurais vu qu'il fallait efface ton numero de serie!!!!!!!!!!!!!!!!!!!!

    j'ai regarde en gros,car tu as tout mis,et moi je voulais juste celui ou ça ne marchait pas.

    enfin bref,sur la plupart des log,on voit "interruption par l'utilisateur" ou "gravure terminee avec succes a 32x.

    musique=8X maxi
    video=4x maxi

    je pense que tu graves trop vite.
    0

Discussions similaires

pas de lecteur CD sur la voiture
coco -
coco -

2 réponses
graver avec vlc
spirituelle -
spirituelle -

2 réponses