Probleme de resolution ou ecran ou logiciel
jacquesmendax
Messages postés
3
Statut
Membre
-
lio -
lio -
Au travail je me sert du logiciel FUPLA pour verifier un equipement electronique.
Je sais pas comment sa ce fait mais image de la page du logiciel entre pas dans ecran et il faut tout le temps se promener dans image hors ecran.Dans le mode emploie on dis 80x50 .
Je sais pas comment sa ce fait mais image de la page du logiciel entre pas dans ecran et il faut tout le temps se promener dans image hors ecran.Dans le mode emploie on dis 80x50 .
A voir également:
- Probleme de resolution ou ecran ou logiciel
- Double ecran - Guide
- Logiciel de sauvegarde gratuit - Guide
- Logiciel - Guide
- Money logiciel - Télécharger - Comptabilité & Facturation
- Logiciel montage vidéo gratuit windows 10 - Guide
5 réponses
Bonsoir.Clic droit sur bureau>proprietes>onglet parametre etaugmente ta resolution de l'écran avec le cur seur.transat
Pour la resolution de ecran, c est pas le probleme, l image est trop grande pour entrer dans ecran. edonc il faut se deplacer par la sourie pour se tasser pour voir la partie ecran non affiche.
2.7 How to Adjust the Screen Display Parameters (for DOS only)
At program start up the FUPLA tools interprets the environment variable DISPLAY which defines the screen
display parameters, used to display more information on the screen, such as 132 characters by 40 lines. If
the environment variable was not set, the screen would be driven in the 80x25 character mode.
Table 1 list the standard video adapters and table 2 lists examples of special video adapters that allow you to
change the screen display format, and gives the SET command that makes the change. For valid video
modes consult the user manual of your video adapter installed on your PC.
Enter the SET command before you start the FUPLA 2 software. The command line can be included in a
*.BAT file (e.g. AUTOEXEC.BAT). Consult your DOS manual for more information about "environment
variables" and the "SET" command.
The EBNF notation for the environment variable is:
SET DISPLAY = width ("X"|"x") height [":" videoMode ("H"|"h")]
width = decNum {decNum}
height = decNum {decNum}
videoMode = hexNum {hexNum}
decNum = 0..9
hexNum = 0..9, A..F, a..f
Example: An EIZO MD-B10 VGA video monitor with a 132 characters x 43 lines display format requires the
Je viens de trouver ca dans aide, ca fait quio.
following SET command:
SET DISPLAY=132X43:22h
- Leading and trailing spaces are allowed. Spaces inside the strings are allowed too. The length of the
given string must not exceed 32 characters.
- Characters after the trailing "H" are not interpreted.
- Height and width must be in range 8..255. Height multiplied by width must not exceed 32'767.
- The video mode must be in range 0h..0FFh.
If one or multiple of this rules are not fulfilled, the video mode will not be changed. No error message is given
out.
For standard video modes (including laptops) use the following set command:
Table 1 Examples for Standard Video Adapters
Video Adapter: Columns: Rows: SET COMMAND
All EGA and VGA adapters 80 43 SET DISPLAY=80X43
All VGA adapters 80 50 SET DISPLAY=80X50
8514 adapter 80 60 SET DISPLAY=80X60
Table 2 Examples for PC Display Format Changes
Video Adapter: Columns: Rows: SET COMMAND
At program start up the FUPLA tools interprets the environment variable DISPLAY which defines the screen
display parameters, used to display more information on the screen, such as 132 characters by 40 lines. If
the environment variable was not set, the screen would be driven in the 80x25 character mode.
Table 1 list the standard video adapters and table 2 lists examples of special video adapters that allow you to
change the screen display format, and gives the SET command that makes the change. For valid video
modes consult the user manual of your video adapter installed on your PC.
Enter the SET command before you start the FUPLA 2 software. The command line can be included in a
*.BAT file (e.g. AUTOEXEC.BAT). Consult your DOS manual for more information about "environment
variables" and the "SET" command.
The EBNF notation for the environment variable is:
SET DISPLAY = width ("X"|"x") height [":" videoMode ("H"|"h")]
width = decNum {decNum}
height = decNum {decNum}
videoMode = hexNum {hexNum}
decNum = 0..9
hexNum = 0..9, A..F, a..f
Example: An EIZO MD-B10 VGA video monitor with a 132 characters x 43 lines display format requires the
Je viens de trouver ca dans aide, ca fait quio.
following SET command:
SET DISPLAY=132X43:22h
- Leading and trailing spaces are allowed. Spaces inside the strings are allowed too. The length of the
given string must not exceed 32 characters.
- Characters after the trailing "H" are not interpreted.
- Height and width must be in range 8..255. Height multiplied by width must not exceed 32'767.
- The video mode must be in range 0h..0FFh.
If one or multiple of this rules are not fulfilled, the video mode will not be changed. No error message is given
out.
For standard video modes (including laptops) use the following set command:
Table 1 Examples for Standard Video Adapters
Video Adapter: Columns: Rows: SET COMMAND
All EGA and VGA adapters 80 43 SET DISPLAY=80X43
All VGA adapters 80 50 SET DISPLAY=80X50
8514 adapter 80 60 SET DISPLAY=80X60
Table 2 Examples for PC Display Format Changes
Video Adapter: Columns: Rows: SET COMMAND
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question