Windows 7 plante
John du 59
Messages postés
86
Statut
Membre
-
John du 59 Messages postés 86 Statut Membre -
John du 59 Messages postés 86 Statut Membre -
Bonjour,
Pourriez-vous m'aider car quand je joue a des jeux comme CoD ghost ou BF3 arrivé un moment windows plante et me met un "blue screen"
Sauriez-vous quel serait la cause ?
Merci d'y répondre ;)
Mon CPU : AMD 8320
GPU : R9 270 ( non X )
Pourriez-vous m'aider car quand je joue a des jeux comme CoD ghost ou BF3 arrivé un moment windows plante et me met un "blue screen"
Sauriez-vous quel serait la cause ?
Merci d'y répondre ;)
Mon CPU : AMD 8320
GPU : R9 270 ( non X )
A voir également:
- Windows 7 plante
- Clé windows 7 - Guide
- Photofiltre 7 - Télécharger - Retouche d'image
- Passer de windows 7 à windows 10 - Accueil - Mise à jour
- Windows defender windows 7 - Télécharger - Antivirus & Antimalwares
- Movie maker windows 7 - Télécharger - Montage & Édition
5 réponses
Bonsoir,
Je suppose vu que tu es joueur que le pilote de ta carte graphique est à jour ?
Teste ta RAM avec MEMTEST86+
Un problème=une solution, le tout étant de la trouver :-)
Je suppose vu que tu es joueur que le pilote de ta carte graphique est à jour ?
Teste ta RAM avec MEMTEST86+
Un problème=une solution, le tout étant de la trouver :-)
Bonsoir,
Pour savoir pourquoi ton pc plante fait ceci :
Télécharge et installe et ouvre WhoCrashed une fois WhoCrashed ouvert clique sur Analyze puis copie ce qui se trouve dans l'onglet Report colle-le dans un fichier texte que tu m'enverras via https://www.cjoint.com/ puis met le lien généré par cjoint dans ta réponse.
Tutoriel pour cjoint : https://www.commentcamarche.net/faq/29493-utiliser-cjoint-pour-heberger-des-fichiers
Un problème=une solution, le tout étant de la trouver :-)
Pour savoir pourquoi ton pc plante fait ceci :
Télécharge et installe et ouvre WhoCrashed une fois WhoCrashed ouvert clique sur Analyze puis copie ce qui se trouve dans l'onglet Report colle-le dans un fichier texte que tu m'enverras via https://www.cjoint.com/ puis met le lien généré par cjoint dans ta réponse.
Tutoriel pour cjoint : https://www.commentcamarche.net/faq/29493-utiliser-cjoint-pour-heberger-des-fichiers
Un problème=une solution, le tout étant de la trouver :-)
Bonjour,
Les plantages ne se produisent-ils que sur ces jeux ? As tu essayé d'y jouer avec toutes les options graphiques au minimum ?
Les BSOD ( ecran bleu ) ont un code 0x.......... peux tu nous l'indiquer ?
pour ma part je pencherai pour un probleme thermique ...
cdt
Les plantages ne se produisent-ils que sur ces jeux ? As tu essayé d'y jouer avec toutes les options graphiques au minimum ?
Les BSOD ( ecran bleu ) ont un code 0x.......... peux tu nous l'indiquer ?
pour ma part je pencherai pour un probleme thermique ...
cdt
Oui le problème thermique se peut car c'est quand le CPU approche les 60 degrès ( c le max un un FX j'ai vu sur des forums ) Mais l'écran bleu reste à peine 2 secs donc pas le temps de voir ... :(
Et oui j'ai deja essayer avec les graphismes au mini
Et oui aussi c'est qu sur les jeux ( mais que les jeux asser gourmend
Mais je pencherais aussi pour un problème de RAM à ce que je vois car c'est 2 fois 4 go
Il y'en a surement une qui " merde "
Et oui j'ai deja essayer avec les graphismes au mini
Et oui aussi c'est qu sur les jeux ( mais que les jeux asser gourmend
Mais je pencherais aussi pour un problème de RAM à ce que je vois car c'est 2 fois 4 go
Il y'en a surement une qui " merde "
Et aussi avec bluescreenview j'ai eu ceci :
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0x0000000000000080, 0x0000000000000002, 0x0000000000000001,
0xfffff80002e8df1f)
*** ntoskrnl.exe - Address 0xfffff80002e84bc0 base at 0xfffff80002e0f000 DateStamp
0x531590fb
Aussi ça : A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff80002fae147, 0xfffff8800a44e2a0,
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff80002e79bc0 base at 0xfffff80002e04000 DateStamp
0x531590fb
Et ça : A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: dxgmms1.sys
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff8800456de7f, 0xfffff88006ebd378,
0xfffff88006ebcbd0)
*** dxgmms1.sys - Address 0xfffff8800455d719 base at 0xfffff8800453c000 DateStamp
0x5164dc13
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0x0000000000000080, 0x0000000000000002, 0x0000000000000001,
0xfffff80002e8df1f)
*** ntoskrnl.exe - Address 0xfffff80002e84bc0 base at 0xfffff80002e0f000 DateStamp
0x531590fb
Aussi ça : A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff80002fae147, 0xfffff8800a44e2a0,
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff80002e79bc0 base at 0xfffff80002e04000 DateStamp
0x531590fb
Et ça : A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: dxgmms1.sys
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff8800456de7f, 0xfffff88006ebd378,
0xfffff88006ebcbd0)
*** dxgmms1.sys - Address 0xfffff8800455d719 base at 0xfffff8800453c000 DateStamp
0x5164dc13
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
J'ai deja tester la RAM avec memtest 86 mais cela met aucune erreur ...