[Server Xorg] multi-affichage Résolu/Fermé

Question

Bonsoir à tous, Je me suis lancé dans le dual-screen , sous debian Je suis donc passé par la config de xorg.conf , dont voici une copie : # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "fr" Option "XkbVariant" "latin9" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection Section "Device" Identifier "nVidia Corporation NV43 [GeForce 6600]" Driver "nv" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "nVidia Corporation NV43 [GeForce 6600] Driver "nv" BusID "PCI:1:0:0" Screen 1 EndSection Section "Monitor" Identifier "710S" Option "DPMS" EndSection Section "Monitor" Identifier "C700" Option "DPMS" EndSection Section "Screen" Identifier "Screen 0" Device "nVidia Corporation NV43 [GeForce 6600]" Monitor "710S" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen 1" Device "nVidia Corporation NV43 [GeForce 6600]" Monitor "C700" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen 0"Screen 0" Screen 1"Screen 1"RightOf "Screen 0" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "DRI" Mode 0666 EndSection Je ne comprends pas ce qui ne focntionne pas ; quand je lance startx , l'ecran principal (Screen0) demarre normalment, et sur l'autre j'ai un out of range..... Merci de votre aide!!

mamiemando · Answer

C'est simplement que tu es dans une fréquence supportée par le premier écran mais pas le second. Au besoin tu peux préciser les fréquences supportées par tes écrans. Par contre je ne sais pas si tu peux avoir une résolution différente pour chaque écran...

Peux tu me donner le résultat de 
dpkg -l | grep xorg
Bonne chance

hackman61 · Answer

Merci beaucoup de tonaide!! Je te redis sa en fin d'apres midi, car la journée je suis en cours, a ce soir!

mamiemando · Answer

A titre indicatif voilà ce que j'utilise :
Section "Monitor"
        Identifier   "Display 1"
        HorizSync    30-68
        VertRefresh  50-85
        Option       "DPMS"
EndSection

Section "Monitor"
        Identifier   "Display 2"
        HorizSync    30-68
        VertRefresh  50-85
EndSection

Section "Device"
        Identifier      "MATROX CARD 1"
        Driver          "mga"
        Screen          0
EndSection

Section "Device"
        Identifier      "MATROX CARD 2"
        Driver          "mga"
        BusID           "PCI:1:0:0"
        Screen          1
EndSection

Section "Screen"
        Identifier "Display 1"
        Device     "MATROX CARD 1"
        Monitor    "Display 1"
        DefaultDepth     24
        SubSection "Display"
                Depth           1
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection


Section "Screen"
        Identifier "Display 2"
        Device     "MATROX CARD 2"
        Monitor    "Display 2"
        DefaultDepth     24
        SubSection "Display"
                Depth           1
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Bonne chance

hackman61 · Answer

Ok je teste et je te redit tout sa, Par contre , je ne comprend pas là : Section "Monitor" Identifier "Display 1" HorizSync 30-68 VertRefresh 50-85 Option "DPMS" EndSection Section "Monitor" Identifier "Display 2" HorizSync 30-68 VertRefresh 50-85 EndSection Section "Device" Identifier "MATROX CARD 1" Driver "mga" Screen 0 EndSection Section "Device" Identifier "MATROX CARD 2" Driver "mga" BusID "PCI:1:0:0" Screen 1 EndSection 1°) HorizSync VertRefresh doivent etres obligatoirement declarées ?? 2°) Tu ne déclare qu'un bus ID ?

hackman61 · Answer

Voici le resultat de dpkg -l | grep xorg :



debian:~# dpkg -l | grep xorg
ii  xorg                              7.1.0-16                        X.Org X Window System
ii  xserver-xorg                      7.1.0-16                        the X.Org X server
ii  xserver-xorg-core                 1.1.1-21                        X.Org X server -- core server
ii  xserver-xorg-input-all            7.1.0-16                        the X.Org X server -- input driver metapacka
ii  xserver-xorg-input-evdev          1.1.2-6                         X.Org X server -- evdev input driver
ii  xserver-xorg-input-kbd            1.1.0-4                         X.Org X server -- keyboard input driver
ii  xserver-xorg-input-mouse          1.1.1-3                         X.Org X server -- mouse input driver
ii  xserver-xorg-input-synaptics      0.14.6-1                        Synaptics TouchPad driver for X.Org/XFree86
ii  xserver-xorg-input-wacom          0.7.4.1-5                       X.Org X server -- wacom input driver
ii  xserver-xorg-video-all            7.1.0-16                        the X.Org X server -- output driver metapack
ii  xserver-xorg-video-apm            1.1.1-3                         X.Org X server -- APM display driver
ii  xserver-xorg-video-ark            0.6.0-3                         X.Org X server -- ark display driver
ii  xserver-xorg-video-ati            6.6.3-2                         X.Org X server -- ATI display driver
ii  xserver-xorg-video-chips          1.1.1-4                         X.Org X server -- Chips display driver
ii  xserver-xorg-video-cirrus         1.1.0-3                         X.Org X server -- Cirrus display driver
ii  xserver-xorg-video-cyrix          1.1.0-4                         X.Org X server -- Cyrix display driver
ii  xserver-xorg-video-dummy          0.2.0-3                         X.Org X server -- dummy display driver
ii  xserver-xorg-video-fbdev          0.3.1-1                         X.Org X server -- fbdev display driver
ii  xserver-xorg-video-glint          1.1.1-3                         X.Org X server -- Glint display driver
ii  xserver-xorg-video-i128           1.2.0-3                         X.Org X server -- i128 display driver
ii  xserver-xorg-video-i740           1.1.0-3                         X.Org X server -- i740 display driver
ii  xserver-xorg-video-i810           1.7.2-4                         X.Org X server -- Intel i8xx, i9xx display d
ii  xserver-xorg-video-imstt          1.1.0-3                         X.Org X server -- IMSTT display driver
ii  xserver-xorg-video-mga            1.4.4.dfsg.1-2                  X.Org X server -- MGA display driver
ii  xserver-xorg-video-neomagic       1.1.1-5                         X.Org X server -- Neomagic display driver
ii  xserver-xorg-video-newport        0.2.0-3                         X.Org X server -- Newport display driver
ii  xserver-xorg-video-nsc            2.8.1-3                         X.Org X server -- NSC display driver
ii  xserver-xorg-video-nv             1.2.0-3                         X.Org X server -- NV display driver
ii  xserver-xorg-video-rendition      4.1.0.dfsg.1-4                  X.Org X server -- Rendition display driver
ii  xserver-xorg-video-s3             0.4.1-5                         X.Org X server -- legacy S3 display driver
ii  xserver-xorg-video-s3virge        1.9.1-3                         X.Org X server -- S3 ViRGE display driver
ii  xserver-xorg-video-savage         2.1.2-3                         X.Org X server -- Savage display driver
ii  xserver-xorg-video-siliconmotion  1.4.1-4                         X.Org X server -- SiliconMotion display driv
ii  xserver-xorg-video-sis            0.9.1-4                         X.Org X server -- SiS display driver
ii  xserver-xorg-video-sisusb         0.8.1-3                         X.Org X server -- SiS USB display driver
ii  xserver-xorg-video-tdfx           1.3.0-1                         X.Org X server -- tdfx display driver
ii  xserver-xorg-video-tga            1.1.0-3                         X.Org X server -- TGA display driver
ii  xserver-xorg-video-trident        1.2.3-1                         X.Org X server -- Trident display driver
ii  xserver-xorg-video-tseng          1.1.0-3                         X.Org X server -- Tseng display driver
ii  xserver-xorg-video-v4l            0.1.1-3                         X.Org X server -- Video 4 Linux display driv
ii  xserver-xorg-video-vesa           1.3.0-1                         X.Org X server -- VESA display driver
ii  xserver-xorg-video-vga            4.1.0-3                         X.Org X server -- VGA display driver
ii  xserver-xorg-video-via            0.2.1-6                         X.Org X server -- VIA display driver
ii  xserver-xorg-video-vmware         10.13.0-3                       X.Org X server -- VMware display driver
ii  xserver-xorg-video-voodoo         1.1.0-4                         X.Org X server -- Voodoo display driver

hackman61 · Answer

Hum au fait , ma carte video à  deux sorties, dont l'une en DVI, j'ai branché un adaptateur VGA dessus , sa peut venir de là ?

mamiemando · Answer

1°) HorizSync VertRefresh doivent etres obligatoirement declarées ??

Non pas pour les versions récentes de xorg. Mais quand tu as des soucis de ce genre ça peut régler des problèmes.

2°) Tu ne déclare qu'un bus ID ? 

Dans mon cas la carte à deux sortie video VGA

3°) Hum au fait , ma carte video à deux sorties, dont l'une en DVI, j'ai branché un adaptateur VGA dessus , sa peut venir de là ? 

Aucune idée. Ce que tu peux essayer c'est d'installer le driver nvidia proprio (cf paquet nvidia-glx, a priori la version "pas legacy") et de corriger ton xorg (backupe le xorg actuel) en conséquence par exemple avec un  :
dpkg-reconfigure xserver-xorg
Le driver proprio (nvidia) devrait apparaître (nv = driver libre). Peut-être que ça résoudra des problèmes. De plus tu pourras bénéficier des outils nvidia qui te permettront a priori de peaufiner les réglages de ton dual screen.

Bonne chance

hackman61 · Answer

Sa y est!! j'ai trouvé
Hum en fait je suis passé sousUbuntu, installé les drivers nVidia et modifié mon xorg.conf comme sa : 


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"nVidia Corporation NV43 [GeForce 6600]"
	Driver		"nvidia"
	Busid		"PCI:1:0:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
	Screen 0
EndSection

Section "Device"
	Identifier	"nVidia Corporation NV43 [GeForce 6600]1"
	Driver		"nvidia"
	Busid		"PCI:1:0:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
	Screen 1
EndSection

Section "Monitor"
	Identifier	"710S"
	Option		"DPMS"
EndSection

Section "Monitor"
	Identifier	"C700"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Screen 0"
	Device		"nVidia Corporation NV43 [GeForce 6600]"
	Monitor		"710S"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier	"Screen 1"
	Device		"nVidia Corporation NV43 [GeForce 6600]1"
	Monitor		"C700"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  	screen "Screen 0"
	screen "Screen 1" LeftOf "Screen 0"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "ServerFlags"
Option "xinerama" "true"
Option "DefaultServerLayout"
EndSection


Section "DRI"
	Mode	0666
EndSection


si cela peut aider d'autres personnes....

Et merci à toi mamiemando  !!!

[Server Xorg] multi-affichage

8 réponses

Discussions similaires