@ ip d'un routeur

pascal -  
 pascal -
bonjour
est il possible de retrouver par je ne sais quel moyen l'@ ip de son routeur sachant que ce n'est pas 192.168.1....etc
c'est un vieux routeur que j'ai récuperer
en auto j'ai une cnx inexistante...
merci
Configuration: Windows XP
Firefox 2.0.0.1

6 réponses

  1. Utilisateur anonyme
     
    En général l'adresse IP est ecrite sur le routeur , sauf si la personne l'a modifié
    .
    Sinon faire un reset
    L'@Ip d'une routeur est en génral 192.168.0.1 ou 192.168.1.1
    0
  2. gosseyn_omega Messages postés 36 Statut Membre 4
     
    c quoi comme marque le router? le model?
    0
  3. pascal
     
    merci pour vos reponses
    le reset est impossible
    le routeur c'est un allied telesyn ar220e
    en dhcp ko
    il m'est impossible de recuperer son @
    bref...
    merci
    0
  4. pascal
     
    il est ecrit seulement class b dessous
    est il possible qu'il ne fonctionne plus
    les leds sont ok
    0
  5. Vous n’avez pas trouvé la réponse que vous recherchez ?

    Posez votre question
  6. Blanc57 Messages postés 377 Statut Membre 73
     
    Comment faire le reset :
    Après reset l'adresse sera 192.168.1.1 théoriquement.

    How to reset the AT-AR220E to factory defaults when running v1.11 code? (lost password)
    Answer
    1. Remove all cables from the Router including the power supply cable.
    2. Press the �Uplink� switch so that it is in the �In� position.
    3. Connect one end of a straight through RJ45 cable to port 4 and the other end into port 1.

    ***This creates a loopback from port 4 to port 1

    4. Re-insert the power supply cable and wait 5-10 seconds and then disconnect the power supply cable. If the
    Self Test LED goes out before the 5-10 seconds that also is a way of showing that the process has completed
    and you can disconnect the power supply cable then.

    ***During the 5-10 seconds you will see the Self Test LED blink orange and
    the middle green Link/Act lights on port 1 and port 4 blink.

    5. The Router is now reset back to factory defaults.
    6. With the Router still powered OFF, re-connect one end of the RJ45 cable into port 1 and the other end into the
    network adapter in the workstation.
    7. Press the �Uplink� button into the �Out� position which is now in Normal.
    8. Re-connect the power supply cable to the 220e.
    9. Test the connection by typing 192.168.1.1 from your web browser.
    0
  7. pascal
     
    comment jai ete surpris et content de cette manip
    mais apres plusieurs tentatives...
    le port 1 link/act clignote
    au bout de 60s le port 4 link/act clignote aussi mais pas tjs
    la led self test ne s'allume jamais
    en le rebranchant dhcp tjs ko
    et 192.168.1.1 tjs innacessible
    c'est dommage
    merci de votre aide
    0