Probleme de démarrage - Page 1

Précédent
  • 1
  • 2
  • 3
jack76170 Messages postés 34 Statut Membre
 
bonjour g3n

voici le rapport diag
https://www.cjoint.com/?CBymahmwsjp

pour info 5 démarrages ce matin ( 6,27 minutes ) mais j'ai filmé et pris des captures d'écran donc il ne me reste plus qu'a les hébergés et je les postes

merci
0
jack76170 Messages postés 34 Statut Membre
 
0
MrYAU31 Messages postés 4631 Statut Membre 1 629
 
Pour l'erreur page_fault_in_nonpaged_area, fais un scan de ton disque dur en récupérant les secteurs défectueux (démarre sur un CD ou une clé si tu ne peux plus du tout démarrer).
https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x50--page-fault-in-nonpaged-area?redirectedfrom=MSDN

Pour l'erreur driver_irql_not_less_or_equal, c'est la même chose.
https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xd1--driver-irql-not-less-or-equal?redirectedfrom=MSDN

Ton disque serait-il en train de lâcher ?
0
jack76170 Messages postés 34 Statut Membre
 
bonjour MrYAU31

j'ai fait un contrôle de mes disque dur avec programme constructeur ( WD et MAXTOR ) mais il me dit que tout va bien donc aucun secteur défectueux et aucune erreur disque , tu pense qu'il me lâche ??

merci
0

Vous n’avez pas trouvé la réponse que vous recherchez ?

Posez votre question
MrYAU31 Messages postés 4631 Statut Membre 1 629
 
C'est le genre de message d'erreur qu'on rencontre quand des secteurs défectueux apparaissent à l'endroit du fichier de pagination de Windows... C'est pour ça que j'ai des doutes sur ton disque...
Tu as essayé de démarrer sur un Live CD ou une clé bootable ?
0
jack76170 Messages postés 34 Statut Membre
 
bonjour

non car mon PC a démarré tout de même après les 6, 27 minutes et actuellement mon fils est dessus et joue en ligne sans problème , c'est vraiment que au démarrage ou ca bug et après nickel

et si je défragmente mon disque es qu'il va sauter les ( le ) secteur défectueux ??

merci
0
MrYAU31 Messages postés 4631 Statut Membre 1 629
 
Défragmenter le disque peut déplacer les fichiers qui seraient sur des secteurs défectueux donc c'est pas un mal.
Si ça n'arrive qu'au démarrage, c'est peut-être le MBR qui est touché.
Essaye aussi ça :
Sous Windows XP, la commande à utiliser pour restaurer le MBR est fixmbr. Elle est accessible depuis la console de récupération.
Sous Windows Vista et Windows 7, la commande à utiliser pour restaurer le MBR est bootrec /FixMbr. Elle est accessible depuis la console de récupération.
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
merci de me laisser faire

surtout que sous vista/7 fixer le mbr peut supprimer l'accès à la partition de restauratoion d'usine
0
MrYAU31 Messages postés 4631 Statut Membre 1 629
 
Je veux bien te laisser faire mais je ne pense pas que tu règleras son problème, qui semble être matériel, en lui demandant des tonnes d'analyses depuis Windows...
Ne sois pas choqué de mon post, il n'est pas méchant. Je t'assure.
C'est juste que les messages d'erreur sont assez parlants pour ne pas en tenir compte...
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
plein de choses peuvent en être la cause.
des rootkits, etc............

sais-tu lire un rapport d'outil de desinfection ?
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
il me manque les codes d'erreur de la deuxieme capture que je n'arrive pas à lire convenablement

0
jack76170 Messages postés 34 Statut Membre
 
bonjour g3n

je n'arrive pas a avoir mieux , je suis déjà en lecture 0.02
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
copie-les
0
jack76170 Messages postés 34 Statut Membre
 
bonsoir

pour info la vidéo fait 419 mo donc pas possible de la poster , je refais une vidéo plus petite demain soir

merci
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
non je voulais dire copie le code d'erreur à la main
0
jack76170 Messages postés 34 Statut Membre
 
bonjour a tous
désoler semaine un peu longue
bref voila trois capture de plantage plus net

https://www.cjoint.com/c/CCcnQV6QWK2
https://www.cjoint.com/c/CCcnRnOCD2V
https://www.cjoint.com/c/CCcnRMRFcHb

merci pour votre aide
0
jack76170 Messages postés 34 Statut Membre
 
pour info je viens d'installer SIW sur mon PC et voici une capture d'écran sur les différent probleme ( une partie de la liste ...)

https://www.cjoint.com/c/CCdaUk7A4Ra

merci
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
j'ai ca pour ton code d 'erreur

Code 0x0000008E

Logiciel : Erreur STOP Windows
Intitulé : KERNEL_MODE_EXCEPTION_NOT_HANDLED
Solution
[1] Windows XP - Erreur au cours de l'installation de Windows XP. Le dossier nommé catrrot2 n'a pas été supprimé pendant l'installation. Supprimez-le manuellement : quand le message d'erreur réapparaît, enfoncez Maj-F10 et entrez les commandes suivantes : cd \windows\system32 et rename catrrot2 catold.
[2] Windows XP - La configuration de la mémoire vive est incompatible avec Windows XP. Pour résoudre le problème, si vous effectuez une mise à jour, démarrez l'ordinateur avec la version précédente du système d'exploitation. Lancez msconfig. Cliquez sur l'onglet BOOT.INI pour sur le bouton Options avancées. Entrez la valeur 128 pour le paramètre MAXMEM.
[3] Windows XP ou Vista - Un barrette de mémoire vive au minimum est endommagée. Remplacez-les barrettes défectueuses.
[4] Windows XP - Si l'erreur survient lorsque vous mettez l'ordinateur en veille après avoir déconnecté un périphérique externe, vous devez installer un correctif fourni par Microsoft. Demandez-le ici.
[5] Windows XP - Vous avez tenté de modifier le paramètre d'accélération matérielle dans la module Affichage du Panneau de configuration. Demandez-le correctif à Microsoft.
[6] Windows XP - Si le message d'erreur fait référence au fichier wdmaud.sys, installez le Service Pack 2.
[7] Windows XP SP2 - Si le problème survient lors de l'installation de ZoneAlarm, téléchargez un correctif sur le site de l'éditeur ou passez à la version suivante.
[8] Le problème peut être dû à la connexion d'un disque externe contenant une partition Linux. Le message d'erreur peut faire référence au fichier smount.sys.

0
jack76170 Messages postés 34 Statut Membre
 
bonjour g3n

merci de ton aide , moi cela me gonfle donc j'ai laissé tomber pendant un certain temps mais j'ai besoin de mon PC

alors j'ai suivie ton idée : ( pour info je suis sur win7 et pas xp )

1) fichier introuvable !!!!
2) MAXMEM non cocher donc je l'ai fait comme tu me l'a écrit mais toujours pareil : démarrage long : 1/2 heure et re plantage j'ai augmenté régulièrement MAXMEM pour arrivé a 3072 et la démarrage rapide mais plantage quand même ........ GRRRRRRRRRRRR

a ce moment un collègue m'a dit d'installer " WHOCRASHED" pour voir quel problème pouvait m' em..... et ce logiciel analyse 21 rapport et 15 on pour origine "AVAST" dingue non !!!!!
j'envoie un rapport a AVAST pour avoir une explication ( non sans mal car le PC plante régulièrement ....) et je désinstalle AVAST pour le moment pas d'explication
en même temps je fait la solution 3)

3) pour les barrettes alors la .... après plusieurs essaye sur trois jours , je suis arrivé a deux barrettes sur quatre et pour le moment pas de plantage
j'ai regardé mon BIOS et la je vois que mes barrettes sont en DDR2 800 MHZ (auto) alors qu'elle sont en réelle DDR2 1066MHZ
mon collègue me dit de vérifier ma version BIOS avec programme MSI LIVE et en effet ma version actuel v1.3 (2008) et nouvelle version a v1.C1 faut il mettre a jour le BIOS ? y'a t'il un risque ??
4) non
5) non
6) non
7) non
8) non

pour info pendant mes plantage écran bleu j'ai eu 4 code défaut différent a savoir :
0*0000007F ( très fréquemment)
0*0000008E ( 3 , 4 fois)
0*00000050 ( 2 , 3 fois)
0*00000001 ( 2 , 3 fois)

merci de me dire quoi faire .
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
hello

1) il peut etre en caché

pour le bios , oui , il y a risque que ton os ne demarre plus suite à la mise à jour du bios

le win7 est d'origine sur le pc ou tu avais xp installé avant ?
0
jack76170 Messages postés 34 Statut Membre
 
bonjour g3n

de nouveau des plantages a répétition , grrrrrrrrrrrr cette fois ci je crois que je vais faire un réglage fin ( au marteau ....)

1) comment faire pour le voir ??

ok pas de changement BIOS

pour win7 : aucune idée j'ai acheté ce PC ( pas cher .... ) et sans CD d'instal

nouveau code erreur 0*0000004F ou 4E
0
jack76170 Messages postés 34 Statut Membre
 
pour info j'ai trouvé ceux ci :

windows\system32\catroot
windows\system32\catroot2

mais impossible de les renommés ils sont actif

HELP grrrrrrrrrrrrrrrrrr merci

pour info

On Sun 10/03/2013 14:14:56 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-19156-01.dmp
This was probably caused by the following module: win32k.sys (win32k+0x5989)
Bugcheck code: 0x1000008E (0xFFFFFFFFC0000006, 0xFFFFFFFF826DE38E, 0xFFFFFFFF8CBEAA74, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\win32k.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote Win32 multi-utilisateurs
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 14:14:56 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: win32k.sys (win32k+0x5989)
Bugcheck code: 0x8E (0xFFFFFFFFC0000006, 0xFFFFFFFF826DE38E, 0xFFFFFFFF8CBEAA74, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\win32k.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote Win32 multi-utilisateurs
Bug check description: This bug check indicates that a kernel-mode application generated an exception that the error handler did not catch.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 14:07:25 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-19094-01.dmp
This was probably caused by the following module: tcpip.sys (tcpip+0x88C5A)
Bugcheck code: 0xD1 (0xFFFFFFFFC52DFB9C, 0x2, 0x0, 0xFFFFFFFF892BAC5A)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\tcpip.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote TCP/IP
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 14:00:02 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-18985-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x9E11B)
Bugcheck code: 0x1A (0x5100, 0xFFFFFFFFC04E6B80, 0xD, 0x792A5963)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 10/03/2013 13:58:24 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-19562-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0xDCE34)
Bugcheck code: 0x4E (0x99, 0x6A895, 0x1, 0x1)
Error: PFN_LIST_CORRUPT
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that the page frame number (PFN) list is corrupted.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 10/03/2013 13:49:31 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-21637-01.dmp
This was probably caused by the following module: win32k.sys (win32k+0xB555C)
Bugcheck code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF95AD555C, 0xFFFFFFFF95191814, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\win32k.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote Win32 multi-utilisateurs
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 13:46:17 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-21106-01.dmp
This was probably caused by the following module: win32k.sys (win32k+0xB5539)
Bugcheck code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF8E565539, 0xFFFFFFFF939C3A60, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\win32k.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote Win32 multi-utilisateurs
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 13:45:07 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-21075-01.dmp
This was probably caused by the following module: netio.sys (NETIO+0x1B509)
Bugcheck code: 0xF7 (0xFFFFFFFF871D298F, 0xFFFFFFFFBB40E64E, 0x44BF19B1, 0x0)
Error: DRIVER_OVERRAN_STACK_BUFFER
file path: C:\Windows\system32\drivers\netio.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Network I/O Subsystem
Bug check description: This indicates that a driver has overrun a stack-based buffer.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 13:42:20 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-11684-01.dmp
This was probably caused by the following module: win32k.sys (win32k+0xC468F)
Bugcheck code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF94F8468F, 0xFFFFFFFFA3F9CB2C, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\win32k.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote Win32 multi-utilisateurs
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 13:34:37 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-12090-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x46F0B)
Bugcheck code: 0x7F (0xD, 0x0, 0x0, 0x0)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 10/03/2013 13:30:52 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-21652-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x286EFF)
Bugcheck code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF822D7EFF, 0xFFFFFFFF8D887B6C, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 10/03/2013 13:01:43 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-13665-01.dmp
This was probably caused by the following module: win32k.sys (win32k+0xB54FF)
Bugcheck code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF95D054FF, 0xFFFFFFFF9A27FA64, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\win32k.sys
product: Système d'exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote Win32 multi-utilisateurs
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Sun 10/03/2013 13:00:43 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-22666-01.dmp
This was probably caused by the following module: Unknown (0xFFFFFFFF8EB01011)
Bugcheck code: 0x1000007E (0xFFFFFFFFC000001D, 0xFFFFFFFF8EB01011, 0xFFFFFFFF8AED6940, 0xFFFFFFFF8AED6520)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error.
Google query: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M



On Sun 10/03/2013 00:40:36 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-13759-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x46F0B)
Bugcheck code: 0x7F (0xD, 0x0, 0x0, 0x0)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 10/03/2013 00:05:06 GMT your computer crashed
crash dump file: C:\Windows\Minidump\031013-13509-01.dmp
This was probably caused by the following module: aswtdi.sys (aswTdi+0x3E3B)
Bugcheck code: 0xD1 (0xC453B06, 0x2, 0x0, 0xFFFFFFFF89294C3E)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: aswtdi.sys .
Google query: aswtdi.sys DRIVER_IRQL_NOT_LESS_OR_EQUAL




--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------

42 crash dumps have been found and analyzed. Only 15 are included in this report. 3 third party drivers have been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:

aswsnx.sys
hal.sys
aswtdi.sys
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
hello refais un diag avec pre_scan stp
0
jack76170 Messages postés 34 Statut Membre
 
bonsoir g3n

voila le rapport

https://www.cjoint.com/c/CCktFz13jze

dit moi ce que tu en pense

merci
0
g3n-h@ckm@n Messages postés 14350 Statut Membre 948
 
j'avais dit "diag" ^^
0
jack76170 Messages postés 34 Statut Membre
 
bonsoir
houpssss désoler

voila le rapport

https://www.cjoint.com/c/CCkwtUGiOpN

merci
0
Précédent
  • 1
  • 2
  • 3