Sujet Précédent Sujet Suivant

[Nero] Probleme Gravure DVD

Résolu/Fermé
Lucky Charm - 16 févr. 2007 à 22:28
 jefgm2000 - 8 déc. 2007 à 00:09
Bonjour, voici j'ai un probleme de gravure avec mon nero 7.

Quelqu'un peu m'aider avec ces logs ? Il grave les cd et non les dvds. 

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1
 (Nero Express)
Recorder:             <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 7.7.5.1
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <MITSUMI  CD-ROM FX240S !B>Version: j01  - HA 1 TA 1 - 7.7.5.1
 Adapter driver:      <IDE>                     HA 1

 Scsi-Device-Map 

DiskPeripheral       : MDT MD1200BB-00FTA0              atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4160B        atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : MITSUMI CD-ROM FX240S !B         atapi Port 1 ID 1  DMA: Off

 CDRom-Device-Map 

HL-DT-ST DVDRAM GSA-4160B  E:   CDRom0
MITSUMI CD-ROM FX240S !B   F:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
BUFE           : 0
Physical memory     : 511MB (523504kB)
Free physical memory: 305MB (312356kB)
Memory in use       : 40 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

16.2.2007
Graver une image DVD
16:08:21	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
16:08:21	#2 Text 0 File Burncd.cpp, Line 3465
	Turn on Disc-At-Once, using DVD media
	
16:08:21	#3 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1799797 (399:57.22, 3515MB)
	
16:08:21	#4 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
16:08:21	#5 Text 0 File DlgWaitCD.cpp, Line 2912
	Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R
	 Disc Manufacturer: TYG02 - 
	 Disc Application Code: 64, Disc Physical Code: 193
	
16:08:21	#6 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
16:08:22	#7 Text 0 File ThreadedTransferInterface.cpp, Line 823
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, ISO 9660)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1799798 (1799798) = #1799798/399:57.23
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1799648 blocks [E: HL-DT-ST DVDRAM GSA-4160B]
	--------------------------------------------------------------
	
16:08:22	#8 Text 0 File ThreadedTransferInterface.cpp, Line 1026
	Prepare [E: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3685986304, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  1799798 |  1799648 | 0x00
	        0 |        1 |   1 |    0x41 |  1799798 |  1799648 | 0x00
	  1799798 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
16:08:22	#9 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
16:08:22	#10 Phase 24 File dlgbrnst.cpp, Line 1760
	Caching of files started
	
16:08:22	#11 Text 0 File Burncd.cpp, Line 4298
	Cache writing successful.
	
16:08:22	#12 Phase 25 File dlgbrnst.cpp, Line 1760
	Caching of files completed
	
16:08:22	#13 Phase 36 File dlgbrnst.cpp, Line 1760
	Burn process started at 8x (11 080 Ko/s)
	
16:08:22	#14 Text 0 File ThreadedTransferInterface.cpp, Line 2764
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
16:08:22	#15 Text 0 File DVDR.cpp, Line 3070
	Recording mode: Sequential Recording Mode
	
16:08:22	#16 Text 0 File DVDR.cpp, Line 3226
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
16:08:22	#17 Text 0 File Cdrdrv.cpp, Line 9288
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      1E75E4 h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
16:09:22	#18 SPTI -1039 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 04 00 00 00 00 10 32 34 00 0C 09 01 
	Buffer x22040040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
16:09:22	#19 CDR -1039 File Writer.cpp, Line 301
	Focus or tracking error
	E: HL-DT-ST DVDRAM GSA-4160B
	
16:09:23	#20 Text 0 File DVDR.cpp, Line 3446
	EndDAO: Last written address was -1
	
16:09:23	#21 CDR -1039 File WriterStatus.cpp, Line 162
	Focus or tracking error
	E: HL-DT-ST DVDRAM GSA-4160B
	
16:09:23	#22 TRANSFER -24 File WriterStatus.cpp, Line 162
	Could not perform end of Disc-at-once
	
16:09:25	#23 Phase 38 File dlgbrnst.cpp, Line 1760
	Burn process failed at 8x (11 080 Ko/s)
	
16:09:26	#24 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
16:09:28	#25 Text 0 File Cdrdrv.cpp, Line 10529
	DriveLocker: UnLockVolume completed
	
16:09:28	#26 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
A voir également:

5 réponses

Réponse 1 / 5
luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019
17 févr. 2007 à 21:32
Autre question... Il est possible que le graveur soit brisé ... mais qu'il est capable de ...

-Lire les cd
-Lire les DVD
-Graver les cd

Mais ne peut pas...

-Graver les DVD?
0
Claude Lachance Messages postés 33498 Date d'inscription lundi 15 janvier 2007 Statut Contributeur Dernière intervention 7 novembre 2024 1 028
18 févr. 2007 à 05:12
Bonsoir LuckyCharm
L'idéal avant d'acheter inutilement, serait de trouver un graveur du même type qui fonctionne et de l'essayer sur votre ordinateur ou encore d'essayer votre graveur sur un ordinateur dont la gravure de DVD est effective. Vous saurez vite ainsi si votre problème est logiciel ou matériel.
0
luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019
18 févr. 2007 à 07:44
Merci du conseil ! :)

J'ai mis à jour en meme temps avec le site : https://www.touslesdrivers.com/ un driver que je n,avais pas vu. Et vlan...il se met à graver. Je ne saute pas tout de suite à capoter. Je vais faire d'autres vérifications.

:)
0
luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019
18 févr. 2007 à 20:40
Bonjour, je vous explique ce qui en est. Le tout semble regler.

Donc.. quand je mets mes DVD... il m'offre 4 ou 8X. J'ai alors choisis 2x sans DVd...et ensuite... j'ai mis le DVD pour quil grave bien à 2 X...

Puis, avec la mise a jour trouver sur le site precedemment dit, le tout fonctionne bien.

DVD: verbatim.

Voilà! Merci et bonne chance aux autrs :)
0
sandrine > luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019
20 févr. 2007 à 16:26
salut! j'ai le meme prob que toi. mon graveur lis et grave les cdr mais pa les dvd.
dés que je met ub dvd le graveur reste inactif.Je ne comprend pas.mon gravur est un hl-dt-st il était incorporé dans la tour acer
Voilà je ne sais que faire.Merci à toi si tu pouvais m'orienter un peu

sandri.
0
Réponse 2 / 5
Claude Lachance Messages postés 33498 Date d'inscription lundi 15 janvier 2007 Statut Contributeur Dernière intervention 7 novembre 2024 1 028
2 mars 2007 à 18:51
Il se vend des cd munis de petites brosses qui permettent de nettoyer les lentilles (et qui suffisent généralement si vous n'avez pas un enfant qui mange de la confiture ou du miel sur ses dvd. J'ai l'impression qu'un nettoyage réglerait votre problème.
Pour faire le même travail manuellement, ces deux sites peuvent être utiles:
http://www.station-drivers.com/page/depcd.htm
https://fr.audiofanzine.com/platine-cd/pedago/tutoriels/Nettoyer-et-r%25C3%25A9gler-la-lentille-d%2527un-lecteur-CD-3076/

Bonne chance!
0
Réponse 3 / 5
fannyser
25 juil. 2007 à 22:45
Bonjour à tous, j'ai le même soucis que cité ci dessus, mais je semble ne pas m'y connaitre autant en informatique que vous... alors je vois que le problème est resolu mais je ne comprend pas de quelle manière en fait...

Donc, j'ai un ordi portable avec dvd rom, dvd rw
il lit les cd
il grave les cd
il lit les dvd
mais ne grave pas les dvd : il marque

: writting error : error occurred writting data to disc
unknown error use extended date for more information ( 1051.)
error sence data : SENSE KEY : 2 ASC : 30 ASCQ : 11

Alors voilà, pour info, j'utilise nero, mais j'en ai essayé plein d'autres et c toujours pareil.... au dernier moment, ça bugg .... je ne sais plus quoi faire.... si vous pouvez m'aider, vous seriez au top.
J'ai acheté un camescope disc dur depuis plusieurs mois, et je ne peux graver dvd!
Sinon, j'utilise dvd R, mes videos sont au format mpg...

HELP !!!! PLEASE!!!!!
0
Réponse 4 / 5
jefgm2000
8 déc. 2007 à 00:09
Bonjour. Mon lecteur/graveur cd et dvd Philips remplit toutes ses fonctions sauf celle de graveur dvd...
J'ai installé Néro Ultra Prémium dernièrement.
Serais-t-ce une incompatibilité de programmes (dvdFab Platinium+any dvd+dvd Shrink+dvd Copy6,...)? J'ai supprimé Any dvd maisq cela ne semble rien changer au problème...
On dirait que le graveur dvd n'existe plus?...
Voyez plutôt le message d'erreur reçu lorsque je tente de graver un dvd préalablement compressé par dvd Shrink:
Code:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 11/10/2003 16:53:12
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 14/03/2007 12:43:16

NT-SPTI used
Nero API version: 7.10.1.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 10, 1, 0

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.88 - HA 1 TA 1 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : IVI Virtual CD 0.5a iviVD Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160021A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DROM6216 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 2 ID 1 DMA: On

=== CDRom-Device-Map ===
PHILIPS DROM6216 D: CdRom0
_NEC DVD_RW ND-3500AG E: CdRom1
IVI Virtual CD K: CdRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 157MB (161592kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.12.2007
NeroAPI
17:15:25 #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started

17:15:26 #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)

17:15:26 #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted

17:15:26 #4 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

17:15:26 #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

17:15:26 #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

17:15:26 #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

17:15:26 #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

17:15:27 #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2042431 (453:52.31, 3989MB)

17:15:27 #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO

17:15:27 #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: PRINCO - RGM1
Disc Application Code: 64, Disc Physical Code: 193

17:15:27 #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:15:27 #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2042432 (2042432) = #2042432/453:52.32
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2042432 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

17:15:27 #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4182900736, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2042432 | 0 | 0x00
2042432 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

17:15:27 #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

17:15:27 #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

17:15:27 #17 Phase 24 File APIProgress.cpp, Line 285
Caching of files started

17:15:27 #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

17:15:27 #19 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed

17:15:27 #20 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 8x (11.080 KB/s)

17:15:27 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:15:27 #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode

17:15:27 #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

17:15:27 #24 Text 0 File Cdrdrv.cpp, Line 9869
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:15:27 #25 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 1F 2A 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

17:15:27 #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
Illegal disc
E: _NEC DVD_RW ND-3500AG

17:15:27 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once

17:15:27 #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

17:15:27 #29 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 8x (11.080 KB/s)

17:15:27 #30 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.

17:15:27 #31 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.

17:15:27 #32 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:15:29 #33 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

17:15:29 #34 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 8/01/2006 17:49:05 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
0

Vous n’avez pas trouvé la réponse que vous recherchez ?

Posez votre question
Réponse 5 / 5
Oric1 Messages postés 746 Date d'inscription jeudi 18 janvier 2007 Statut Contributeur Dernière intervention 20 avril 2007 410
17 févr. 2007 à 08:05
l'origine de ton problème est matérielle, donc c'est soit le disque soit le graveur...

plusieurs pistes à explorer :

où achètes-tu tes DVD ? il existe de nombreuses contrefaçons des DVD Taiyo Yuden dont la qualité n'a rien à voir avec les vrais...

https://www.afterdawn.com/guides/archive/dvd-r_media_report.cfm

pour le graveur, débranche la prise électrique du lecteur de CDROM branché sur la même nappe IDE que ton graveur DVD LG et réessaye mais en 4x ...




-1
luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019
17 févr. 2007 à 09:26
Ce que je trouve special, c'est qu'il grave les CD, mais pas les DVD. J'ai essayé verbatim et memorex que j'ai acheté chez bureau en gros.

Je vais tenter un nettoyage. Je vous reviens avec ca.

Merci
0
luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019
17 févr. 2007 à 10:28
Voici, j'ai fait un nettoyage... et rien de plus. J'ai deconnecté mon autr cd rom et rien. J'ai meme fait un formatage et tout reinstaller. J'ai tester 3 sortes de dvd...dont verbatim.

Comme j'ai dit, il grave les cd mais pas les dvds. Pourtant, il le faisiat bien avant.

Voici le dernier log 

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002-07-17 09:20:56 
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 18:35:34 
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
 (Nero Express)
Recorder:             <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 6.6.0.13
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 6.6.0.13
 Adapter driver:      <atapi>                   HA 1

 Scsi-Device-Map 

DiskPeripheral       : MDT MD1200BB-00FTA0              atapi Port 0 ID 1  DMA: On 
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4160B        atapi Port 1 ID 0  DMA: On 

 CDRom-Device-Map 

HL-DT-ST DVDRAM GSA-4160B  E:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523504kB)
Free physical memory: 157MB (161372kB)
Memory in use       : 69 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

17.2.2007
Burn DVD Image
03:56:12	#1 Text 0 File Reader.cpp, Line 127
	Reader running
	
03:56:12	#2 Text 0 File Writer.cpp, Line 122
	Writer HL-DT-ST DVDRAM GSA-4160B running
	
03:56:12	#3 Text 0 File Burncd.cpp, Line 3167
	Turn on Disc-At-Once, using DVD media
	
03:56:12	#4 Text 0 File DlgWaitCD.cpp, Line 260
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1799797 (399:57.22, 3515MB)
	
03:56:12	#5 Text 0 File DlgWaitCD.cpp, Line 272
	Write in overburning mode: NO (enabled: CD)
	
03:56:12	#6 Text 0 File DlgWaitCD.cpp, Line 2339
	Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
03:56:12	#7 Text 0 File DlgWaitCD.cpp, Line 438
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
03:56:12	#8 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1799798 (1799798) = #1799798/399:57.23
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1799798 blocks [HL-DT-ST DVDRAM GSA-4160B]
	--------------------------------------------------------------
	
03:56:12	#9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3685986304, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1799798 | lead-out |   1 |    0x41 | 0x00
	
03:56:12	#10 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
03:56:13	#11 Text 0 File Burncd.cpp, Line 4051
	Cache writing successful.
	
03:56:13	#12 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
03:56:13	#13 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 4x (5 540 KB/s)
	
03:56:13	#14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
03:56:13	#15 Text 0 File DVDR.cpp, Line 2267
	Recording mode: Sequential Recording Mode
	
03:56:13	#16 Text 0 File Mmc.cpp, Line 21469
	Set BUFE: Buffer underrun protection -> ON 
	
03:56:13	#17 Text 0 File DVDR.cpp, Line 2421
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
03:56:13	#18 Text 0 File Cdrdrv.cpp, Line 8438
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 5
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 2FE10 h
	  Start sector number of the next Border-In:     2FFA0 h
	 Media Specific [16..63]:
	      00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	      00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
03:57:30	#19 SCSI -1194 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x063C0000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x04
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 
	            0x32 0x38 0x00 0x0C 0x73 0x04 
	
03:57:30	#20 CDR -1194 File Writer.cpp, Line 311
	PMA update failure
	
03:57:30	#21 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
03:57:30	#22 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
03:57:30	#23 Text 0 File DVDR.cpp, Line 2658
	EndDAO: Last written address was -1
	
03:57:46	#24 CDR -1194 File WriterStatus.cpp, Line 167
	PMA update failure
	HL-DT-ST DVDRAM GSA-4160B\H1 T0
	
03:57:46	#25 TRANSFER -24 File WriterStatus.cpp, Line 167
	Could not perform end of Disc-at-once
	
03:57:46	#26 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 4x (5 540 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002-07-17 08:53:02 
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2002-12-31 07:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
0
Oric1 Messages postés 746 Date d'inscription jeudi 18 janvier 2007 Statut Contributeur Dernière intervention 20 avril 2007 410
17 févr. 2007 à 10:35
ta version de Nero n'est plus à jour, mets à jour vers la 6.6.1.4

https://www.nero.com/eng/products/upgrade-center.php



0
Claude Lachance Messages postés 33498 Date d'inscription lundi 15 janvier 2007 Statut Contributeur Dernière intervention 7 novembre 2024 1 028 > luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019
17 févr. 2007 à 15:17
Salut
Note que les Memorex ne valent pas grand chose.
0
luckyCharm Messages postés 64 Date d'inscription vendredi 2 février 2007 Statut Membre Dernière intervention 3 décembre 2019 > Oric1 Messages postés 746 Date d'inscription jeudi 18 janvier 2007 Statut Contributeur Dernière intervention 20 avril 2007
17 févr. 2007 à 17:46
Bonjour

J'ai fait la mise à jour et toujours le meme probleme. Voici le dernier log 

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002-07-17 09:20:56 
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
 (Nero Express)
Recorder:             <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1

 Scsi-Device-Map 

DiskPeripheral       : MDT MD1200BB-00FTA0              atapi Port 0 ID 1  DMA: On 
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4160B        atapi Port 1 ID 0  DMA: On 

 CDRom-Device-Map 

HL-DT-ST DVDRAM GSA-4160B  E:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523504kB)
Free physical memory: 164MB (168164kB)
Memory in use       : 67 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

17.2.2007
Burn DVD Image
11:43:08	#1 Text 0 File ThreadedTransfer.cpp, Line 531
	ReadBuffer-Pipe got 72704KB of Memory
	
11:43:08	#2 Text 0 File Reader.cpp, Line 124
	Reader running
	
11:43:08	#3 Text 0 File Writer.cpp, Line 122
	Writer HL-DT-ST DVDRAM GSA-4160B running
	
11:43:08	#4 Text 0 File Burncd.cpp, Line 3305
	Turn on Disc-At-Once, using DVD media
	
11:43:08	#5 Text 0 File DlgWaitCD.cpp, Line 281
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1799797 (399:57.22, 3515MB)
	
11:43:08	#6 Text 0 File DlgWaitCD.cpp, Line 293
	Write in overburning mode: NO (enabled: CD)
	
11:43:08	#7 Text 0 File DlgWaitCD.cpp, Line 2612
	Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
11:43:08	#8 Text 0 File DlgWaitCD.cpp, Line 459
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
11:43:08	#9 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1799798 (1799798) = #1799798/399:57.23
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1799798 blocks [HL-DT-ST DVDRAM GSA-4160B]
	--------------------------------------------------------------
	
11:43:08	#10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3685986304, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1799798 | lead-out |   1 |    0x41 | 0x00
	
11:43:08	#11 Text 0 File SCSIPassThrough.cpp, Line 38
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
11:43:08	#12 Text 0 File SCSIPassThrough.cpp, Line 83
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
11:43:08	#13 Phase 24 File dlgbrnst.cpp, Line 1685
	Caching of files started
	
11:43:08	#14 Text 0 File Burncd.cpp, Line 4145
	Cache writing successful.
	
11:43:08	#15 Phase 25 File dlgbrnst.cpp, Line 1685
	Caching of files completed
	
11:43:08	#16 Phase 36 File dlgbrnst.cpp, Line 1685
	Burn process started at 4x (5 540 KB/s)
	
11:43:08	#17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
11:43:08	#18 Text 0 File DVDR.cpp, Line 2707
	Recording mode: Sequential Recording Mode
	
11:43:08	#19 Text 0 File DVDR.cpp, Line 2863
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
11:43:08	#20 Text 0 File Cdrdrv.cpp, Line 8647
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 2FE10 h
	  Start sector number of the next Border-In:     2FFA0 h
	 Media Specific [16..63]:
	      00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	      00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
11:44:30	#21 SPTI -1194 File SCSIPassThrough.cpp, Line 289
	E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x04
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 10 32 38 00 0C 73 04 
	Buffer x03740000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
11:44:30	#22 CDR -1194 File Writer.cpp, Line 311
	PMA update failure
	E: HL-DT-ST DVDRAM GSA-4160B
	
11:44:30	#23 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
11:44:30	#24 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
11:44:30	#25 Text 0 File DVDR.cpp, Line 3103
	EndDAO: Last written address was -1
	
11:44:46	#26 CDR -1194 File WriterStatus.cpp, Line 167
	PMA update failure
	E: HL-DT-ST DVDRAM GSA-4160B
	
11:44:46	#27 TRANSFER -24 File WriterStatus.cpp, Line 167
	Could not perform end of Disc-at-once
	
11:44:46	#28 Phase 38 File dlgbrnst.cpp, Line 1685
	Burn process failed at 4x (5 540 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002-07-17 08:53:02 

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
0

Discussions similaires

INSTALLER NERO 7 SERIAL
TONTON JO -
BmV -

2 réponses
Logiciel honestech vhs to dvd 3.0 se
Audrey -
glandu -

2 réponses
Brnachement lecteur DVD externe sur televiseur
bennito86 -
MPMP10 -

2 réponses
pas image avec honestech VHS to DVD 3.0 SE
manue14 -
glandu -

5 réponses