Canon MP560 printer error message

Hello, I used the MP520 method for my MP560 and it works perfectly:
http://imprimante-en-question.blogspot.fr/2007/09/remise-zro-des-compteurs-dimprimantes.html

Re

Found for the MP550 here
http://imprimante-en-question.blogspot.com/2011/12/imprimante-canon-pixma-mp550.html

Error B200: Print head overheating. Unplug the printer for 5 minutes and restart; if the error persists: either the head is dead (HS), or there is an internal sensor problem.

Another method to try found here
http://imprimante-en-question.blogspot.com/2007/09/remise-zro-des-compteurs-dimprimantes.html

for the Mp 530
1 Turn off the printer.
2 Press the "resume" button (red circle in the triangle), and, while holding it, press "power".
3 Release the "resume" button.
4 Without releasing the "power" button, press the "resume" button twice and release both buttons.
5 Press "resume" four times. Press power to validate.
6 Press "power" again to restart the printer.

for the 520
1 Turn off the printer.
2 Press buttons No. 1 + 2 + 3 and 4 without releasing them.
3 Keep them pressed for 10 seconds.
4 Release the "On/Off" button (No. 4) while still holding the others.
5 After a few seconds, when the printer turns on, release the three buttons.

Edit see also
http://imprimante-en-question.blogspot.com/2012/01/resoudre-l-erreur-b200-sur-les.html

Very hard to catch a black cat in a dark room
Especially when it isn’t there... !!!!

Hello,
I’m in the same boat as you now.
My MP560 printer stopped working and the B200 code appeared.
I’ve tried the solutions proposed above and it doesn’t work. :(
Is there still a chance to get this printer working again?
Thank you very much !!!

thank you BALADUR13 It worked for mp560 with your resume and power reset you’re amazing

Hello
What error does the printer display?
--
Very hard to catch a black cat in a dark room
Especially when it’s not there...!!!!