Emule, ID bas
Solved
dewey011090
Posted messages
18
Status
Membre
-
Sergei-Savicheva -
Sergei-Savicheva -
Hello, I would like to have a high ID on eMule, I have disabled the Windows firewall. I still have a low ID, does anyone know how to fix this? Thanks in advance
Configuration: windows xp home, emule v0.47a
78 réponses
- 1
- 2
- 3
- 4
Suivant
TUTORIAL FOR CONFIGURING EMULE HIGH ID WITH NEUF BOX V4
1) Start by installing Emule
Once Emule is installed go to:
- the PREFERENCES tab (the yellow wheel on the far right of the Emule window)
- in the left column click on CONNECTION (the red plug)
In this window, there is a box in the middle called: CLIENT PORT
Inside you will find:
TCP = 58 608
UDP = 20 252
(These values are mine, I took them for the example but it doesn't matter, keep the ones that Emule gave you)
Take note of these values as you will need them later when configuring the NEUF BOX.
Exit Emule.
2) Now let's move on to configuring the NEUF BOX.
Click on the following link to open the configuration page of your NEUF BOX
http://192.168.1.1/
( Otherwise Start menu windows – All programs – Neuf – Tools – Configuration of your Neuf box )
The configuration page of your NEUF BOX opens, go to:
1-the NETWORK tab and the sub-tab WAN check that your NEUF BOX is in router mode (if not, do it and validate)
2-Then click on the NAT tab ( there is a Port Translations section you will need to fill in and create lines to open the Ports of your NEUF BOX)
Fill them out like this:
The first line
- Name = Emule
- Protocol = TCP
- Port / Range = Single port
- External ports = 58 608 ( Emule value taken beforehand, put yours )
- Destination IP addresses = 192.168. 1 . 2
- Destination ports = 58 608 ( Emule value taken beforehand, put yours )
(Validate by clicking on the plus at the end of the line)
The Second line
- Name = Emule
- Protocol = UDP
- Port / Range = Single port
- External ports = 20 252 ( Emule value taken beforehand, put yours )
- Destination IP addresses = 192.168. 1 . 2
- Destination ports = 20 252 ( Emule value taken beforehand, put yours )
(Validate by clicking on the plus at the end of the line)
Now at this stage you have configured your NEUF Box for Emule, now you need to do the same for your PC
3) PC Configuration
– Windows START menu
– Then click on CONNECTION
– Then click on OPEN NETWORK AND SHARING CENTER
– In front of your connection click on VIEW STATUS
– A window called "Local Area Connection Status" opens, click on properties (For those using Vista, click continue to open the next window)
– A window called "Local Area Connection Properties" opens, in the middle there is a box and inside is a line called "Internet Protocol Version 4 (TCP/IPv4)" double click.
– A window called "Internet Protocol Version 4 (TCP/IPv4) Properties" opens,
Check the line = Use the following IP address, then enter these values:
• IP Address = 192.168. 1 . 2
• Subnet mask = 255.255.255. 0
• Default gateway = 192.168. 1 . 1
• Check the line = Use the following DNS server address
• Preferred DNS server = 192.168. 1 . 1
• Alternate DNS server = leave blank
Validate everything by clicking OK to close all windows
4) Configuration of your Firewall
Personally, I use Norton and when you activate Emule for the first time Norton asks if you allow Emule to use the internet, if you answered yes there's nothing more to do, otherwise open Norton and
• Under the Norton Internet Security tab
• Go to SETTINGS at the bottom click on "Internet security and firewall options"
• Program controls (left column)
• In front of Emule set to ALLOW
• Close all pages by validating
AND IT'S MAGIC, WHEN YOU CONNECT TO EMULE YOU ARE FINALLY ON HIGH ID
PS:
For users of other internet service providers, Firewall find out how to configure your modem and your firewall, the PC CONFIG step 3 remains the same regardless of the internet service provider and firewall.
1) Start by installing Emule
Once Emule is installed go to:
- the PREFERENCES tab (the yellow wheel on the far right of the Emule window)
- in the left column click on CONNECTION (the red plug)
In this window, there is a box in the middle called: CLIENT PORT
Inside you will find:
TCP = 58 608
UDP = 20 252
(These values are mine, I took them for the example but it doesn't matter, keep the ones that Emule gave you)
Take note of these values as you will need them later when configuring the NEUF BOX.
Exit Emule.
2) Now let's move on to configuring the NEUF BOX.
Click on the following link to open the configuration page of your NEUF BOX
http://192.168.1.1/
( Otherwise Start menu windows – All programs – Neuf – Tools – Configuration of your Neuf box )
The configuration page of your NEUF BOX opens, go to:
1-the NETWORK tab and the sub-tab WAN check that your NEUF BOX is in router mode (if not, do it and validate)
2-Then click on the NAT tab ( there is a Port Translations section you will need to fill in and create lines to open the Ports of your NEUF BOX)
Fill them out like this:
The first line
- Name = Emule
- Protocol = TCP
- Port / Range = Single port
- External ports = 58 608 ( Emule value taken beforehand, put yours )
- Destination IP addresses = 192.168. 1 . 2
- Destination ports = 58 608 ( Emule value taken beforehand, put yours )
(Validate by clicking on the plus at the end of the line)
The Second line
- Name = Emule
- Protocol = UDP
- Port / Range = Single port
- External ports = 20 252 ( Emule value taken beforehand, put yours )
- Destination IP addresses = 192.168. 1 . 2
- Destination ports = 20 252 ( Emule value taken beforehand, put yours )
(Validate by clicking on the plus at the end of the line)
Now at this stage you have configured your NEUF Box for Emule, now you need to do the same for your PC
3) PC Configuration
– Windows START menu
– Then click on CONNECTION
– Then click on OPEN NETWORK AND SHARING CENTER
– In front of your connection click on VIEW STATUS
– A window called "Local Area Connection Status" opens, click on properties (For those using Vista, click continue to open the next window)
– A window called "Local Area Connection Properties" opens, in the middle there is a box and inside is a line called "Internet Protocol Version 4 (TCP/IPv4)" double click.
– A window called "Internet Protocol Version 4 (TCP/IPv4) Properties" opens,
Check the line = Use the following IP address, then enter these values:
• IP Address = 192.168. 1 . 2
• Subnet mask = 255.255.255. 0
• Default gateway = 192.168. 1 . 1
• Check the line = Use the following DNS server address
• Preferred DNS server = 192.168. 1 . 1
• Alternate DNS server = leave blank
Validate everything by clicking OK to close all windows
4) Configuration of your Firewall
Personally, I use Norton and when you activate Emule for the first time Norton asks if you allow Emule to use the internet, if you answered yes there's nothing more to do, otherwise open Norton and
• Under the Norton Internet Security tab
• Go to SETTINGS at the bottom click on "Internet security and firewall options"
• Program controls (left column)
• In front of Emule set to ALLOW
• Close all pages by validating
AND IT'S MAGIC, WHEN YOU CONNECT TO EMULE YOU ARE FINALLY ON HIGH ID
PS:
For users of other internet service providers, Firewall find out how to configure your modem and your firewall, the PC CONFIG step 3 remains the same regardless of the internet service provider and firewall.
- 1
- 2
- 3
- 4
Suivant
Thank you for taking the time
++
THANK YOU Skynet95!!!!!!!!