View original (French)

Code de télécommande universelle EMTEC

bryan airsoft Posted messages 8 Status Member -  
 popo -
Hello,

I bought a universal remote EMTEC H040 that works properly, but I have a problem. There is no code for Sigmatek brand DVBs in the code book, so I can't connect the remote to my digital terrestrial television, which is very annoying since the original one is broken..

Do you know where I could find this code or if someone could give it to me that would be great :) .

Best regards

8 answers

  1.
    pinouf42 Posted messages 384 Status Member 31
     
    I have the same remote control as you, but I can only enter one 4-digit code and the codes you provided do not work. I don't understand.
    --
    “Mac is complicated!” No! It's different!
    Best regards
    Pinouf42
    3
  2. bryan airsoft Posted messages 8 Status Member 3
     
    Hi,

    For a Proline TV, you need to enter the code: 0004 0051 0062

    I can't tell you exactly how to program the remote because I don't know what brand it is.

    In any case, on mine, you need to:
    -Press setup for about 5 seconds
    -Select which button to program the TV (TV, DVD, SAT or AUX)
    -And enter the code above...

    Is there still no one for my problem??
    2
  3. schouquette
     
    Bonjour, je cherche le code pour une télévision Panasonic normale.
    2
    1. micka139
       
      Hello, I'm looking for the code for a Hannspree screen.
      1
    2. clachr
       
      Hello, I'm looking for the code of a Continental Edison TV.
      0
    3. popo
       
      Hello, I am looking for the code for a nesx demodulator. It works very well but the original remote is broken. I have a universal remote emtec.
      Thank you for your response.
      0
  4. bryan airsoft Posted messages 8 Status Member 3
     
    Ok :)
    1
  6. pinouf42 Posted messages 384 Status Member 31
     
    I'm sorry, I don't have the answer; however, I lost the user manual. Could you please email me the code book, or if it’s too large, let me know the procedure to configure it and the code for a Proline television? Thank you in advance.
    --
    “Mac is complicated!” No! It’s different!
    Best regards
    Pinouf42
    0
  7. bryan airsoft Posted messages 8 Status Member 3
     
    If the four codes don't work, I don't see, sorry..

    UP!!! PLEASE
    0
  8. pinouf42 Posted messages 384 Status Member 31
     
    I found that, in reality, the codes that worked were those from EUROLINE. In particular, 0169. Thank you so much!
    --
    "Mac is complicated!", No! It’s different!
    Best regards
    Pinouf42
    0
  9. scorpion
     
    Hello, I am looking for the codes for a Hypson TV.
    0