View original (French)

Connect 2 TVs to the same antenna

eloanne08 Posted messages 83 Status Membre -  
eloanne08 Posted messages 83 Status Membre -
Hello,

I have 2 TVs, one connected to the rooftop antenna with a TNT adapter and the other TV is just connected to the same antenna but without a TNT adapter. I would like to know before buying another adapter if it will work?

THANK YOU

Configuration: Windows 7 / Opera 9.80

4 réponses

Réponse 1 / 4
Anonymous user
 
You need a splitter (in-line splitter) with 1 input and 2 outputs, one for each TV, that's all.
But be careful, you'll lose some signal, so if it was already a bit tight before, it might not work on some channels anymore.
1
eloanne08 Posted messages 83 Status Membre
 
Is it expensive? What does it look like? Where can I find it?
0
Anonymous user
 
around 5 to 8 euros depending on the quality, in all TV stores, DIY shops, and even some hypermarkets
0
eloanne08 Posted messages 83 Status Membre
 
0
eloanne08 Posted messages 83 Status Membre
 
but where does it connect? sorry, but I'm not very skilled.
0
Anonymous user
 
the input to the antenna, the 2 outputs to each of the 2 TVs
0
Réponse 2 / 4
chrischris83 Posted messages 3226 Status Membre 377
 
It works very well at my place
--
1
eloanne08 Posted messages 83 Status Membre
 
a ok b I'm just going to try it with the adapter, I'll see afterwards.
0
Réponse 3 / 4
chrischris83 Posted messages 3226 Status Membre 377
 
yes it will work you need an adapter for each TV
--
0
eloanne08 Posted messages 83 Status Membre
 
0
Réponse 4 / 4
chrischris83 Posted messages 3226 Status Membre 377
 
oui monsieur
--
0
eloanne08 Posted messages 83 Status Membre
 
a ok that's cool thanks
0